Berg Cup Polo Shell and other bits

VW polo coupe Berg Cup style shell

Full12 point roll cage with harnes mounts, door bars,dash bar and front terrets points and bucket seat mtgs.
Uprated rear beam with adjustable stiffness, coil overs with with two way adjustment on front. Strut top, and chassis braces. Spare set of doors boot and a fiberglass bonnet skin and I think a spare tailgate as well.
Fiberglass arches with the originals cut out and plated so loads of space for wide 13" . Paint outside is a little dull but will polish up. Inside looks rusty but its surface only, it's solid and a soft media blast (£150) would save good few hours of rubbing down. Spare wheel well removed and blanked off
With the shell comes discs pads, MK1 golf brake master cylinder (no servo) plastic bits, radiator harness, alloy catch tank .... And other stuff like lights spoilers, bumpers etc
Priced at £500 +£50 to cover ebay fees.
NO POSTAGE -COLLECTION ONLY
Tel 078759745650

Also available at extra cost are the following bits, will sell as individual pieces if required.
1.4 AFH engine - verbiage pulleys etc.
Twin 40 inlet manifold
16v gearbox
1.1ltr 5 speed close ratio box
Tony law hand built exhaust manifold and system
Mattaig wheels 13" 2x7" 2x8" 0 et
4x 165 50 13 road tyres
Set 13" slicks
6x minilite / superlite wheels 4x7" + 2x8"
Megajolt programmable ignition
Lightened AFH 16v Flywheel.
Harnesses
Bucket seats
...... I'm sure there is other stuff ?