Hi Folks, its my sons VW Polo front door, The door was caught by the wind and has put the alignment out slightly , the door has dropped in relationship to the rear pannel, My son is sick as it is his pride and joy as it is a 56 plate.

I want to know , How to remove the plastic inner bottom trim at the bonnet lever location? Do you have to remove the lever first ( if so how )? Or does the pannel slip over the lever ? When this pannel is removed will it give access to the inner hinge bolt ? I hope some one can help . Many thanks

john.hynd1@virgin.net

Hi Folks, its my sons VW Polo front door, The door was caught by the wind and has put the alignment out slightly , the door has dropped in relationship to the rear pannel, My son is sick as it is his pride and joy as it is a 56 plate.

I want to know , How to remove the plastic inner bottom trim at the bonnet lever location? Do you have to remove the lever first ( if so how )? Or does the pannel slip over the lever ? When this pannel is removed will it give access to the inner hinge bolt ? I hope some one can help . Many thanks

john.hynd1@virgin.net

Isnt that still under warrantee? Get it sorted at the dealers as its poor build quality.

I don't own a 9N3 but I've attached ETKA for you. The diagram should be able to clear few things up.

Cheers

Gavin