ace, cant wait to see it!

ill be the one standing next to it all day, pointin at it and telling my missus its off clubpolo over and over again

LOL!!! To be fair mate youve done wel getting your missus to come to a show with you in the first place!

how about a side exit like you see on some of the evo's through the front bumber near the wheel

obviously this aint an evo...but you get the idea

Thats exactly what i was thinking dude... until i thought what Johnny said, itll be too much, bad enough with a one off front end without the exahust coming out as well, would love to have the air filter poking out one side and the exhaust the other side!

i would say that you have enough little individual mods now to set you away from the crowd so if i were you i wouldn't do anything too silly with the exhaust as it may be a little too busy as you said just keep it clean and get a nice diesel stealth exhaust in stainless imo of course

I'm thinking now I'm going to defently get a stealth exhaust, but exactly like the 16v one's go, so the tailpipe swirls round but obviously itll be stainless!

Bloody Longlife are fully booked so I've decided to go for a Powerflow system now, only difference is the down grade in steel but hey hoe, lifetime garentee I'm sure i can live with that!

Need to go my toe in n outs sorted aswel, front wheels are all over the place!!! Also my coilovers are doing my FUCKING HEAD IN!!! I cant seem to get the rears level, the drivers side is about 2 inchs from the bottom of the thread and the passenger side is almost on the last thread and even then the cars ever so slightly lower on the drivers side! WTF! :S

Edited 29 January, 200917 yr by poundie

Something I've been working on for the past couple of weeks just to make the polo that bit more legal than it was

I've managed to fabricate the indicators into the fogs lights, they already exsist in the headlights but when the full beam is on its hard to see them, and when i brought the car it had LEDs in the top of the windscreen, wasnt cool :S lol

Started off by shaving the inside of the fog to fit the new back and bulb

Shaved the top of the cap that goes over the back to form a base for the new set up

New back to go on the above screw in cap, made from.... the top of a Horlicks lid

The new setup which has been cut from a set of old Nova indicators i had laying around which was great, all ready to screw in so no mucking around with them just had to mould them to the exsisting back and the Horlicks lid...

New back to the indifogs formed

Screw it in...

All in, accessble as well, haven't just moulding everything together and glued it, everything is unscrewable so i can change the bulb's!

Tada! One Indifog!

Edited 29 January, 200917 yr by poundie

That is awesome dude, what a great idea

mint idea mate!!! Was wondering about the hastle you might get from the five0 about your bonnet....!!

But you dont got any fogs no more :(

who needs fogs anyway,,rarely get used anyway

so if you have HID's then you dont really need them .

the indifog, mega idea!

going back to the zorst, i was looking at pistonheeds at some lupo's/arosas for the Mrs and came across this little beasty.

thats pretty subtle i think...

you know when you got the car with the DSG kit on (or i think thats who made it) did it have a back bumper made by the same folk, or just a 16v?

great indea withe the indicators and that exhaust looks awsome^^^^^

mmmmmm sounds like you are not having fun with the coilovers! Not trying to be funny but is your drive 100% level because i had a similar problem and then i got it on level ground and i was perfect!!!

Indicators in the fogs is cool! Get some Silvatec bulbs in there

Cheers for the comments on the Indifogs guys, much appreciated

Defently dont want HID's think it would ruin the front!

That front exhaust is rude!!! Love it, but not for the polo cos I'm putting indicators in the bumpers now!

Johnny... went for a 'drive' today and the car is PISSED! and so is the drive, so going to try and go down to a place called TuningWerkes and hope my buddy will help me out n let me use his nice flat floor!

What are silvertec bulbs Tris?

cool mate sounds like a plan not about a pissed car tbh Silvertec bulbs are indicators that look silver but flash orange you definietley need to get some of them they are not expensive even halfords sell them iirc

Ah sweet! Ill be geting some of them then... for a... Nova :S

Right! Got my new exhaust fitted today but only took pics of when i dropped the car off but not of the car done... oops! Anyways ill take some tomorow!

Nice little advert for them...

nice. what tailpipe did you go for in the end?

is it a full system?

Got a straight through from cat back, and gone for the standard look, but cleaned and with grunt

What are silvertec bulbs Tris?

They are bulbs which are silver in colour but flash orange.

Looking absolutely pimp poundie, really like the indicator idea.

By the way what side skirts are those?

Ah ok cheers Indy!

Cheers dude, there DSP side skirts, still haven't got any pics of the pipe cos of the weather and theres no way I'm going outside anytime soon

pussy pondie :p am out in it now!!! fitting side skirtd to my mates soding punto! lol

That looks bloody amazing

Fuck pussey! lol only reason I'm going out is to throw snow balls at the neighbours and to do some drifting!

Cheers Sammy! Cant see the bloody thing at the moment cos of all the snow!

Fuck pussey! lol only reason I'm going out is to throw snow balls at the neighbours and to do some drifting!

Cheers Sammy! Cant see the bloody thing at the moment cos of all the snow!

lmao wish i could have got out to have some fun..

Fitting skirts to a punto, cant get much better than that!

Fitting skirts to a punto, cant get much better than that!

lmao .. i know my god they looked horid.. sutch a horrible fit.. and still looks like crap.....

whats more annoying is i told him to get some turbo's, and slamm it 70/60.. and colour code it..

but he wuddnt listen.. lol....

least some1 had fun