Skip to content

GERMAN POLOS

Featured Replies

The 9A 2.0 16v engine is more tunable than the ABF 2.0 16v but not sure they could get near a well tuned G40 turbo

erm the abf is actually better to tune mate. ABF replaced the 9a and they fixed a few issue with it, more power and more torque with a abf, if u run both blocks on same management and spec etc the abf would pull more power. 190bhp is pretty easily and relatively cheaply achieved on them aswell and most of all they are reliable and pretty to straight forward to turbo/supercharge as the blocks and internals are pretty much bullet proof.

One thing u can beat is tanin someone and then tellin em its a 1.3 lol

Edited by damageandy

  • Replies 31
  • Views 2.3k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

its like that crazy guy on edition putting 2 v6 lumps in a loopy!

fair play to him. tbh if i was gonna go through all the custom fabby majiggery id put something jap in the front a mark 3 tbh. 1.6 16v 160?bhp in stock form anyone??

The Whole Servo thing is probabbly the main problem .

You see, this I don't understand. It doesn't actually have to be on the driver's side - if Ford can manage to leave the brake servo on the left side of a Ford Ka, then I don't see the problem. Yeah, it means the conversion isn't going to be plug 'n' play, but then the more unusual ones are worth the effort, right?

Ford Ka brakes are horrid though...

Mk1 Golf had the servo on the passenger side and this was widly regarded as the reason for poor brakes.

Just get rid of the servo...job done.

its like that crazy guy on edition putting 2 v6 lumps in a loopy!

fair play to him. tbh if i was gonna go through all the custom fabby majiggery id put something jap in the front a mark 3 tbh. 1.6 16v 160?bhp in stock form anyone??

185bhp 1.6 16v if you want as well...only issue with Honda engines is you have to drive like a hooligan to get the power. You'd be better with an EG Civic though and take advantage of the power, light weight and better chassis design.

Edited by Tav

The Whole Servo thing is probabbly the main problem .

You see, this I don't understand. It doesn't actually have to be on the driver's side - if Ford can manage to leave the brake servo on the left side of a Ford Ka, then I don't see the problem.

Can't cry about the past, but can alter the problems created by it. My mates running a mk3 fiesta brake linkage in his mk2 8v golf in order to get his dellorto side draughts on. He's running 16v (256mm) brakes up front with green stuff and goodridge stainless lines and it stops nicely (i almost stoved him up the arse it stops so well). TBH the master cylinder linkage out of a mk3 fezzie is poss the best part of the car. Looks better than the mk1 golf linkages.. and thats another option.

One thing u can beat is tanin someone and then tellin em its a 1.3 lol

This is why i wouldn't bother with a big engine even if i did have the skills and know how at my disposal :-)

The Whole Servo thing is probabbly the main problem .

You see, this I don't understand. It doesn't actually have to be on the driver's side - if Ford can manage to leave the brake servo on the left side of a Ford Ka, then I don't see the problem. Yeah, it means the conversion isn't going to be plug 'n' play, but then the more unusual ones are worth the effort, right?

Ford Ka brakes are horrid though...

Mk1 Golf had the servo on the passenger side and this was widly regarded as the reason for poor brakes.

Just get rid of the servo...job done.

its like that crazy guy on edition putting 2 v6 lumps in a loopy!

fair play to him. tbh if i was gonna go through all the custom fabby majiggery id put something jap in the front a mark 3 tbh. 1.6 16v 160?bhp in stock form anyone??

185bhp 1.6 16v if you want as well...only issue with Honda engines is you have to drive like a hooligan to get the power. You'd be better with an EG Civic though and take advantage of the power, light weight and better chassis design.

hrrrrrrrrrrrrrrrrrrmm yuuummmmmmyyyyy!

see this is where me n u differ though tav. i do drive like a hooligan lol and you always go on about buying the complete car as its "better" but to me, the fun of driving is being in the underdog and havin to push it to the limit lol!! and just think, a 1.6 16v 185 bhp + gas and charger........ in a mark 3 polo. sounds awesome to me :D8-)

  • Author

personally if it aint been done i want to do it, for no other reason than the challenge. :-D

The Whole Servo thing is probabbly the main problem .

You see, this I don't understand. It doesn't actually have to be on the driver's side - if Ford can manage to leave the brake servo on the left side of a Ford Ka, then I don't see the problem. Yeah, it means the conversion isn't going to be plug 'n' play, but then the more unusual ones are worth the effort, right?

Ford Ka brakes are horrid though...

Mk1 Golf had the servo on the passenger side and this was widly regarded as the reason for poor brakes.

Just get rid of the servo...job done.

its like that crazy guy on edition putting 2 v6 lumps in a loopy!

fair play to him. tbh if i was gonna go through all the custom fabby majiggery id put something jap in the front a mark 3 tbh. 1.6 16v 160?bhp in stock form anyone??

185bhp 1.6 16v if you want as well...only issue with Honda engines is you have to drive like a hooligan to get the power. You'd be better with an EG Civic though and take advantage of the power, light weight and better chassis design.

hrrrrrrrrrrrrrrrrrrmm yuuummmmmmyyyyy!

see this is where me n u differ though tav. i do drive like a hooligan lol and you always go on about buying the complete car as its "better" but to me, the fun of driving is being in the underdog and havin to push it to the limit lol!! and just think, a 1.6 16v 185 bhp + gas and charger........ in a mark 3 polo. sounds awesome to me :D8-)

Yeah this is where me and you differ...I don't drive like a hooligan and carry an IAM membership card in my wallet...because pushing something to the limit isn't to be done on the public road.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.