Skip to content

fitting sparco seats in a mk3

Featured Replies

anyone fitted sparco seats in a mk 3 before, as I've just bought some second hand, and although I've got them fitted, i dont believe i have the right fittings.

i will try and explain how it is fitted.......

the back of the sub frame has bolts either side with an extended round section that allows it to slide on the runners in the car, with the front of the frame connected using a nut and bolt where the pullout pin is that allows you to slide the standard seat forward normally...... now hopefully that makes some sense..... the problem is that the bolts on the rear of the subframe that sit on the runners can move up and down as they are not big enough to fill the gap in between the runners.... therefore the seat has some play in it if you move the back up and down.....

can anyone shed some light on what fittings should actually be used.....?

other than that i was thinking of making so polyurethane bushes to go round the bolts to bridge the gap and stop the play whilst absorbing vibration at the same time.....

  • Replies 9
  • Views 1.9k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

  • Author
Would these do the job if fitted:

http://cgi.ebay.co.uk/VW-VOLKSWAGEN-POLO-P...7QQcmdZViewItem

Item no. 200164278113

good idea, but beat you too that one as already tried them off my old seats.

its that sort of idea what i was thinking, but if you look at the picture (very badly drawn i know! haha), it kinda gives a better idea.....

  • Author
Would these do the job if fitted:

http://cgi.ebay.co.uk/VW-VOLKSWAGEN-POLO-P...7QQcmdZViewItem

Item no. 200164278113

good idea, but beat you too that one as already tried them off my old seats.

its that sort of idea what i was thinking, but if you look at the picture (very badly drawn i know! haha), it kinda gives a better idea.....

post-13102-1202227547_thumb.jpg

what subframes are you useing ? i have sparco seats/subframes and fit perfect !

  • Author
what subframes are you useing ? i have sparco seats/subframes and fit perfect !

sparco seats & subframes....... apprantly they ccame out of a mk3.....

they will fit, but just need to know how they are supposed to attach to the rear runners.....

are you able to take a pic of yours please so i can see whats missing...? :-)

  • Author
what subframes are you useing ? i have sparco seats/subframes and fit perfect !

sparco seats & subframes....... apprantly they ccame out of a mk3.....

they will fit, but just need to know how they are supposed to attach to the rear runners.....

are you able to take a pic of yours please so i can see whats missing...? :-)

bump :-)

  • Author
what subframes are you useing ? i have sparco seats/subframes and fit perfect !

sparco seats & subframes....... apprantly they ccame out of a mk3.....

they will fit, but just need to know how they are supposed to attach to the rear runners.....

are you able to take a pic of yours please so i can see whats missing...? :-)

bump :-)

can anyone help....... :?

will get some pics up for you dude .

DSC01290.jpg

DSC01292.jpg

DSC01293.jpg

j

Edited by polokid

  • Author
will get some pics up for you dude .

DSC01290.jpg

DSC01292.jpg

DSC01293.jpg

j

i think I've spotted what the problem is!

there looks like there is a metal plate that slots inside of the runner that os bolted to the subframe so when you tighten it, it clamps agains the runners in the car and stops the seat moving! is that correct?

if so, its the plates that go inside the runners that I'm missing!

cheers, Tommy.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.