Skip to content

How can I repair or mask a dent

Featured Replies

Hi guys,

Unfortunatly my polo has been dented.... my fault for not paying attention when reversing. Its taken some of the paint of which flaked off easily. I need advice on how I can repair it, or whther just to paint over it to mask it and protect it from rusting.

What to do you think will be the best option?

Pics:

post-9695-1203063471_thumb.jpg

post-9695-1203063554_thumb.jpg

  • Replies 13
  • Views 1.8k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

White shouldnt be a difficult one to touch up I think... if it was a metallic one your in for a nightmare. I'd say get that light out and file/sand the top surface smooth (the horizontal surface below the bottom edge of the rear light), and use some bodywork filler (not sure the name, Isopone or something like that, someone else should bring it up) and fill over the dent and sand smooth with 200 working up to a 1200, then spray it with the matching paint and lacquer... That should hide it nicely... Try and find out the name of that bodywork filler via. google or something!

"David's Isopon P38" :D:thumbsup:

Edited by Wiggy

sand bit of filler paint keep it local on a corner it's easy to blend in :)

Looks like it has coursed it to creased the metal under the light, you will need a hammer gently tap it low.

take the bumper off, is there more damage?

if you just want to hide the dent i would, take light out, tap the top flush, open tailgate and mask off bumper as not to mark keep the repair as small as poss, P180 grade dry around and in the dent (wet flatting is for old dogs) bit of filler in the dent and just passed rub down with the P180 finish with P320, wipe off, white is a great colour to hide dents, get a can of gloss matched paint (cheap) mask off sticking to lines in the panel work (edges). Grey scotch around that coner bit

Soft edge .... turn the masking back on its self on that corner bit

Spray the dent in lots lots of small very thin layers cover the dent dont spray up to the back masking as ploishing this (hard edge will be tricky)

make a cupa

well done

Thanks for the replies guys a really appreciate the response! Since I'm a noob to all this is all the above straight forward to do? Plus is it ok to do it in the cold weather as I have been told to wait until it gets warmer. I'm willing to give it a try though!

Sunj

don't try to rush the job.

take your time,you will get a better finish.

if you rush the job you will only end up doing it again in a couple of months time

just use a hair dryer to warm the panal before painting it will be fine

Touch it up for now, until you are ready to tackle the job. What about your bumper?, thats got abit of a crease in it.

Touch it up for now, until you are ready to tackle the job. What about your bumper?, thats got abit of a crease in it.

Yeh thats what I'm thinking as I don't want to do filler etc until I'm ready.

The bumper has got a slight crease in it, but after some back to black hopefully it will look a lot better. I think the lines have come from the actual 'b2b' coming off, which makes it look creased. I have checked for damage but it just has a small scratch but mostly its fine. Thank god for big bumpers!

Still gutted though :-( I'm taking it as a sign to drive more carefully.... it could have been a lot worse.

Sunj

take the bumper off, is there more damage?

I haven't taken the bumper off yet, but I don't think the damage has gone that far (I hope). Its something that I'l do though when it comes to repairing it :thumbsup:

with plastic bumpers you can improve them alot if you heat them up put pressure on where the crease is then let them cool down ;)

give it a go and learn from it, after all its only a old polo..... lol

some good tips are in there

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.