Skip to content

Fastest polo Gt ?????

Featured Replies

will be nice to see someone build a quick n/a car for a change. Seems everyone round here just G40's everything and that's that.

How abouts you start with a 1400 16v 100bhp motor though? Some wild cams and bike carbs! Ported and polished head! 4 Branch, Ported and polished inlet manifold, bigger injectors, remap, lightened flywheel, paddle clutch. I believe a 1400 valver tuned up would thrash a standard G, plus it'll be individual and it'll sound mental on bike carbs and with a naughty set of cams!

no i agree. chrissys should be interesting. him and his dad are aiming for around 140bhp iirc. with all that weight reduction itll give mine a beasting for sure. still g40's are done to death around here because economically its the best route simple as.

  • Replies 91
  • Views 5.7k
  • Created
  • Last Reply

Top Posters In This Topic

Also just timed them two polos going for it down the strip in the video - G40 apx low to high 15 sec qtr and the Gt high 16/17 sec qtr , thats not bad for the gt if thats std ish ?? .

Also just timed them two polos going for it down the strip in the video - G40 apx low to high 15 sec qtr and the Gt high 16/17 sec qtr , thats not bad for the gt if thats std ish ?? .

i think giorgios gt was around the 95 mark.... i think. so 20 ish more than standard. he saw the light too flogged it and bought a 220bhp g40.

Edited by supercharged spaniel

I love the idea of starting with a 100bhp motor but i've got a GT lump on my garage floor thats saying help every time i go past it lol.

If it's purely for drag racing, my advice would be to select a camshaft carefully- look at forced induction cams (there's a reason behind this). Forget forged pistons, and lighter this etc, you're wasting valuable money. Spend on an uprated driveshafts, G40 Box (best ratios for the strip) and a proper LSD (like the gripper ones) and mostly some properly sized Drag Slicks. THe remainder of your money I'd spend on a direct port kit, controller and wideband (oh and proper plugs and a service).

The GT is 75bhp stock, will little hope of anything over 90bhp without blowing alot of cash (trust me, I know!) so get a good nitrous system, and jet up for around 150bhp increase, with mechanical grip on your side, and the ability to control power you'd be able to hit 13s I imagine.

The problem with this set-up is, you've spent around £2.5k on a car, that when your nitorus runs out will bog down on the line, and be beaten by a stock GT... :lol:

Mine ran a 15.3 without the trhottle bodies, but with an 80bhp increase of nitrous, recorded 125ish bhp and a similar torque figure on a 50 shot of nitrous.

There is potential there, just getting to it is very expensive, and requires some thought.

I'm hoping to go along those lines with a 2.0 ABF lump in the near future. N/A screaming power.

well a standard G is 113bhp. i remember samg40 put his on the rollers (standard Or near as hell to) and came out at 125bhp. so if you could get a gt upto that your laughing, but i dont think its gonna be easy. que someone with proper gt know how to make a comment....

I'm hoping to go along those lines with a 2.0 ABF lump in the near future. N/A screaming power.

whats that one out of? mk3 gti or something??

If it's purely for drag racing, my advice would be to select a camshaft carefully- look at forced induction cams (there's a reason behind this). Forget forged pistons, and lighter this etc, you're wasting valuable money. Spend on an uprated driveshafts, G40 Box (best ratios for the strip) and a proper LSD (like the gripper ones) and mostly some properly sized Drag Slicks. THe remainder of your money I'd spend on a direct port kit, controller and wideband (oh and proper plugs and a service).

The GT is 75bhp stock, will little hope of anything over 90bhp without blowing alot of cash (trust me, I know!) so get a good nitrous system, and jet up for around 150bhp increase, with mechanical grip on your side, and the ability to control power you'd be able to hit 13s I imagine.

The problem with this set-up is, you've spent around £2.5k on a car, that when your nitorus runs out will bog down on the line, and be beaten by a stock GT... :lol:

Mine ran a 15.3 without the trhottle bodies, but with an 80bhp increase of nitrous, recorded 125ish bhp and a similar torque figure on a 50 shot of nitrous.

There is potential there, just getting to it is very expensive, and requires some thought.

i love it when yoof or andy replies. mate you should save them in a file on your com. a database of answers for the same questions that come up time after time.

aye found in some seats aswell iirc

If it's purely for drag racing, my advice would be to select a camshaft carefully- look at forced induction cams (there's a reason behind this). Forget forged pistons, and lighter this etc, you're wasting valuable money. Spend on an uprated driveshafts, G40 Box (best ratios for the strip) and a proper LSD (like the gripper ones) and mostly some properly sized Drag Slicks. THe remainder of your money I'd spend on a direct port kit, controller and wideband (oh and proper plugs and a service).

The GT is 75bhp stock, will little hope of anything over 90bhp without blowing alot of cash (trust me, I know!) so get a good nitrous system, and jet up for around 150bhp increase, with mechanical grip on your side, and the ability to control power you'd be able to hit 13s I imagine.

The problem with this set-up is, you've spent around £2.5k on a car, that when your nitorus runs out will bog down on the line, and be beaten by a stock GT... :lol:

Mine ran a 15.3 without the trhottle bodies, but with an 80bhp increase of nitrous, recorded 125ish bhp and a similar torque figure on a 50 shot of nitrous.

There is potential there, just getting to it is very expensive, and requires some thought.

i love it when yoof or andy replies. mate you should save them in a file on your com. a database of answers for the same questions that come up time after time.

Apparently Andy has no finger prints anymore :ninja::lol:

will be nice to see someone build a quick n/a car for a change. Seems everyone round here just G40's everything and that's that.

How abouts you start with a 1400 16v 100bhp motor though? Some wild cams and bike carbs! Ported and polished head! 4 Branch, Ported and polished inlet manifold, bigger injectors, remap, lightened flywheel, paddle clutch. I believe a 1400 valver tuned up would thrash a standard G, plus it'll be individual and it'll sound mental on bike carbs and with a naughty set of cams!

we'll see this summer hopefully.

I'm hoping to go along those lines with a 2.0 ABF lump in the near future. N/A screaming power.

whats that one out of? mk3 gti or something??

Aye mate, mk3 Golf GTi

Plan is to find a very late mk2 Golf 1.3 and do the conversion. Just as a toy to play with as it's still un-decided on what the score is with my car with regards to getting a company car with my new job.

that would be cool. company car for the day, older car for the fun... its the only way...

Yoof thanks for the help, did think about NOS , and if i could get it into low 15's i'd be happy - for abit lol , 13's in a square would be nuts and a dream but maybe one day .

Slicks on a spare set of rims for the front is the idea when going to the strip cos every little helps .

Also going to try and keep the car as light as possible and get the suspension sorted with poly bushes,strut brace etc cos i'd like it to handle and have ago at a track day or two , not just wanting it as an out right drag car, but it would be fun with a Turbo busa lump and wide slicks lol , now that would be very quick

i think giorgios gt was around the 95 mark.... i think. so 20 ish more than standard. he saw the light too flogged it and bought a 220bhp g40.

Having owned a fairly modified GT and a G40 I can say they are no even in the same league. Dont get me wrong here GT's are brilliant engines and for about £500-700 you can make them about 100bhp which gives you a brilliantly fun car to drive. Extremely nippy. As that video shows when I raced a 180ish bhp G40 I smoked him off the line because of the gearbox but he ended up finished about 3 seconds before me.

Its just simple economics. Spend 5k on a G40 and your knocking on 200bhp. Spend 5K on a GT and your lucky to get anything remotely near that.

I love GTs so much I bought my old one back. GT as a daily G40 as a mental toy.

EDIT - You could always stick a 1.4 or 1.6 bottom end on the GT head, although that is kind of cheating

Edited by GiorgioGT

It all depends on when a GT stops being a GT and when a G40 stops being a G40..... Is it the shell, the Block, the charger?

Does it have to be purely N/A, is nitrous allowed???

It all depends on when a GT stops being a GT and when a G40 stops being a G40..... Is it the shell, the Block, the charger?

Does it have to be purely N/A, is nitrous allowed???

There is not really a line. I refer to my car as a G40 for convenience but its just a G40 by the skin of its teeth. Dont think there is one standard part in the entire set up. The 1W folk doent ever run polo parts anymore, except for the head, which is modified.

Cant remember the exact line but that Romeo & Juliette jazz about a rose and another name

40's?? dont do it!!!!!!!!!!!! lol

had alot of probs with them hopefully 2day it should be alive and ready 2 drive!!!!

I've spent alot of muny on this lump and I'm not interested in beating n e g40's i just want sumthing that sounds ace and is fun 2 drive

i haven't gone overboard with it just:

40's

p&p head + rebuild

shrick 268/268 cam

4 branch 2" centre section with remus backbox

and other little things as well

looking at over 100bhp but 2 b honest if its not then I'm not 2 worried its something I've wanted 2 do.

i say go for it matey...I'm gettin a mk4 1 litre polo in may,puttin a GT cam in it and other lil engine mods...i.e manifold and what not,i know its not gunna be a rocket or anything near TBH and soooo many people have said whats the point,its a waste of money,but its a waste of my money not theirs...i want to do it for experience and to say i did it,it will be different because i know knowone wastes their time and money on a 1 litre,but i cant afford a GT or G40,nor am i expecting to keep up with either...and the mods wont cost me that much...I loved the sound of yoofs GT,awesome :)

I'm with the non G40 convertion group, just don't want one as a matter of principal, I'm stubborn and thats like giving in :lol: I'm quite happy with my GT engine, just need to get a bit more poke out of the old git! if i got 105bhp on the rollers id be well happy, not interested in beating G40's really. I would really love 40's but i'm happy at the moment, just love Blueys sound so much i wouldnt want to change it to sound like any other g40, 40's would make him sound so awesome tho :-D maybe one day!

I'm with the non G40 convertion group, just don't want one as a matter of principal, I'm stubborn and thats like giving in :lol: I'm quite happy with my GT engine, just need to get a bit more poke out of the old git! if i got 105bhp on the rollers id be well happy, not interested in beating G40's really. I would really love 40's but i'm happy at the moment, just love Blueys sound so much i wouldnt want to change it to sound like any other g40, 40's would make him sound so awesome tho :-D maybe one day!

1.4 it! :)

just do a 1.6, there is no substitute for capacity

just do a 1.6, there is no substitute for capacity

think your find there is - known in the trade as 'forced induction'

although cogs have started turning for my 1.6 GT Loon :p

if you want serious power and torque get a swindon race engine very nice but expensive they have them in alot of rally cars and even gt3 ferrari f 360 8-)

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.