Skip to content

Novadosed loonatic

Featured Replies

I've wanted one of these for a while, originally wanted a 2 door, but i saw this 4 door local and kinda cheap so i went for it :thumbsup:

Its nothing special, and never will be, but i just thought id keep a progress thread on here :-)

Bought it standard, 1.2 8v, rather tidy just a little rust on the rear offside arch and around filler cap

Only 2 pics of it standard (thanks to mancmike and beckyb)

dsc0008qm9.jpg

mancmeetfeb029li3.jpg

As with all my cars, the first mod is slammage :unibrow:

So a pm to philj to get some cheap coilies went ahead. Got them in no time 8-)

Fitted them (much easier than shitty polos/golfs :badgrin: ) and put them on the lowest setting. I knew the rears werent going to sit as low as the fronts so i kept the helper springs in on these :disgust: , but i didnt know it would look like this :shock::lol:

birchmeetfeb023xk8.jpg

So off came the rears again and i took the adjuster rings out, which brought it down about another 15mm

dsc00335ke4.jpg

dsc00336wy8.jpg

Still isnt low enough for my liking :cry:

But it`ll have to do until i can figure out how to bring the rear down more, then i`ll take the helper springs out of the front to get it on the floor :thumbsup:

I bought these wheels a while ago. MK2 Golf gti 16v wheels AKA montreals AKA bottle tops

pict15731dt1.jpg

I originally wanted to put them on my last polo (the scarlet minx) but i was going to make them look like giant bottle caps :-D (some of you might remember my thread asking for different kinds of caps?)

I was going to do four different kinds of cap (coke,sprite,J20 and probs Becks) which would of looked cool i think 8-)

I did a chop of the coke one (silver bits were going to be mirror polished)

cokebottletopnk8.jpg

Well anyway, i sold the polo, so now I'm going to put them on the loon. But I'm just going paint the centres black and polish the same bits as above

Like i said, this isnt going to be anything special, i want my golf to be the special one :thumbsup:

But i do have a few plans, I'm going to get rid of the slooooooooooowwwww engine and put a 1.6 8v in it (out of a nova GTE) but run it on twin 40`s, probs DCOE`S. Tidy up the rust and just add a few chrome/polished bits

Want it to look like this (silver/grey bits will be polished/chrome)

novaplansuc3.jpg

Thats it really :-D i`ll add updates as they happen, doubt many people will be interested anyway though :lol:

  • Replies 401
  • Views 48.2k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

get some fat beeeatches in the rear 2 get that back down! seriously though think its got a sweet stance and with some sickkk gurth on the rear would look spot on man!

ahh finally the bottle top randomness is explained, thats pretty cool dude, and the nova will look cool if it ends up like that chop, whatever happens itll be pimp, especially peoples faces as they hear and see the screaming new lump

thats a cool nova 'loon. i must admit, i'd have one if saw one cheap.

If you're going for a 1600 for insurance reasons, then why not go x16xe (from the corsa sport), its a really nice motor and responds well to tuning. I know of quite a few mini's with that engine in.

My first choice engine would still be a c20xe however :wink:

OMG that is awesome...lovin the stance...your cars always seem to look the nuts man...my cousin is gettin rid of her nova saloon,you need any bits???

I'm suprised how good it looks lowerd!

Mate you gota get those bottle tops.

loving the idea with the wheels, bottle lids need to be done :p

you coming along to the manc meet on 20th? i neeeeed to see it now its slammed :p

thats lookin sweet Craig haha

Awesome this mate! no PTnT chopped springs? :(

Can't wait to see the bottle tops pimping on this, was i the only person to guess the meaning of the bottle cap thread?!

Edited by skatty_01

Love the saloons, Spesh the 2 doors but 4 doors are just as pimp. :-D

A huge improvment as always with the lowering

Wheels will look good when done, def do them in the black and silver detail

how bout doin the wheels as a beer bottle top mate?

looks sweet when u text me with what the wheles were and you are ideas i new u wer eontoa winner, and as ste sais beer bottle tops would be cool. what ever u decide I'm sure it will be pimp mate.

Awesome this mate! no PTnT chopped springs? :(

Can't wait to see the bottle tops pimping on this, was i the only person to guess the meaning of the bottle cap thread?!

i knew :p

Looking good matey :-D

Deja Vu... I've seen this before have I not?? Looks good!! Keep up the work

Well i finished clay baring it today (only took 4 weeks nearly :lol: ) so i gave it a nice polish and wax to celebrate :-)

Also tinted my rear lights (bottom half) and indicators/side repeaters

Some reflection shots 8-)

Roof

dsc00338hj5.jpg

Boot lid

dsc00339rc5.jpg

Bonnet

dsc00340vc0.jpg

Tinted lenses

dsc00341xp6.jpg

dsc00342pj8.jpg

dsc00343bs4.jpg

I'm not too sure on the fronts, i only wanted to do a light tint but the orange coming through looked rubbish :cry:

I`m getting some clear ones anyway on thursday so i`ll just do a light tint on them :thumbsup:

thats a cool nova 'loon. i must admit, i'd have one if saw one cheap.

If you're going for a 1600 for insurance reasons, then why not go x16xe (from the corsa sport), its a really nice motor and responds well to tuning. I know of quite a few mini's with that engine in.

My first choice engine would still be a c20xe however :wink:

Not only insurance reasons, my golf will have a BIG engine in 8-) and i want another 20vT polo so I'm planning on keeping this as a daily

I'm not a fan of N/A 16+v engines really :ninja: i like low down grunt hehehe

OMG that is awesome...lovin the stance...your cars always seem to look the nuts man...my cousin is gettin rid of her nova saloon,you need any bits???

Cheers dude :-)

If its black then yes, i want both front wings and driver door :nod:

But its highly unlikely it will be black :cry:

how bout doin the wheels as a beer bottle top mate?

I did think of doing them as Guiness (sp?) ones :? i`ll do a chop.......

Deja Vu... I've seen this before have I not?? Looks good!! Keep up the work

That depends, where? are you on PNG?

And thanks :-)

Thanks to evryone else, I'm not quoting everyone :lol::-p

Sam you were the ONLY one to guess yes, but i did tell a few people :-p

Dont know about the next meet Mike, maybe....

Edited by walshc

I'm going to have one of these ASAP. As soon as the 205 XS is stripped and scrapped and I have some money!

oi walshy...guess what?just been given a nova 1.2 hatch.were all takin novadoses haha..erm my cousins is blue with a black n/s front wing,think it might be a bought wing as in not painted yet...sorry matey...you need anything else off it? erm do you know anyone with any GSI front and rear bumpers? its been barried to fook...ill get pics up of it next week when i get it...

or i just need some standard front and rear bumpers...just registered on png...was jus lookin at you thread on there...:)

Edited by Genesis Jim

satin black the front grill will look ace with the indicators and body! 8-)

looks sooooo much better now you have finally finished clay barring it and brought the rear down a bit more 8-)

take it to the next manc meet and I'll get some nice pics of it :-D

keep it up, now stop reading this and go get polishing those damn wheels!

Bec x

oi walshy...guess what?just been given a nova 1.2 hatch.were all takin novadoses haha..erm my cousins is blue with a black n/s front wing,think it might be a bought wing as in not painted yet...sorry matey...you need anything else off it? erm do you know anyone with any GSI front and rear bumpers? its been barried to fook...ill get pics up of it next week when i get it...

or i just need some standard front and rear bumpers...just registered on png...was jus lookin at you thread on there...:)

Nah mate, nothing else, I'm picking up all the bits i need today off a guy breaking one 8-)

Whoop! CP taking over PNG :lol:

Christian, you have great taste hehehe thats what I'm doing, I'm going to satin black the bumpers, mirrors, rub strips and splitter too 8-)

And I'm going to colour code that bit in between the front bumper and splitter :-)

I`ll see what I'm doing nearer the time for the manc meet Bec :-)

Hahaha I've done a little part of the wheels, but my fingers started hurting :-(

I`ll do the guiness chop tomoz too....

Novas kick ass.

Bro had a GTE once, went like f-k!

Grrr i didnt realise guinness bottle caps were white :thumbsdown:

Novas kick ass.

Bro had a GTE once, went like f-k!

Thats good to hear :-D its the GTE engine that i`ll be using, plus a few little goodies :unibrow:

Looking good Craig. I've always fancied myself a Nova saloon but never actually bit the bullet and bought one. Theres two near my house, a beige and a red, mmmm beige Nova saloon :lol:

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.