Skip to content

Polly Polo Project Progress...

Featured Replies

bit of a tongue twister that title!

Anyway..

She's a 1.2, 6v on a 52 plate, basic engine (haha..slow :p ), S model,

Leather Steering wheel and gearshift gaiter, under seat storage trays, height adjustable front seats, windows shut with central locking, blah blah ....

Anyways, over to the important stuff.. it's completely standard at the mo, other than a Bugpack chrome cone air filter from work, as the standard air box was breaking my coil packs!!!! stoopid design!

Will upload some pics later tonight when I get home...

I have a front + rear lower spoilers, 16" rims, sideskirts still to come, keeping an eye out for a leather interior.

In the future I've got in mind:

Camming the engine, fitting oversize valves, porting / polishing the head, possibly custom inlet manifold, full flow custom stainless exhaust, maybe a slightly different ratio gearbox..

I know, I'll get the lecture of "get over it, it's a 1.2 6v"

but hey, it's gna be the fastest 1.2 6v around!! ;)

May also consider fitting a relatively small turbo..

I know these engines are strong, but wouldn't want to test its limits by fitting too big a turbo..

What you think peeps?

Olz x

  • Replies 36
  • Views 3.7k
  • Created
  • Last Reply

Top Posters In This Topic

what made you decide to buy a 1.2 6v?

1: low petrol consumption - cost

2: low insurance

3: low pretol consumption - environmental issues

shoving a turbo on it is gonna shove the insurance up far more than it origionally coming with a bigger engine.

its gonna use more fuel.

i dont see the point, for how much it would cost to professionally fit a turbo, you might aswell get a fatter engine.

and i doubt that the bhp gain in such a heavy car will make much difference.

its your car though, do what you want.

omg is this a 6v lol please say iys a 16v

sorry thats sounds bad, but i agree with picki, there is no point in doing anything to that engine save up and buy something faster, is a 6v or a v6 hey :wink::-p:lol:

is it the one in ure avatar??

....hope to see it up at the brandshatch meet (prept... last wed of the month) ;)

david.

Fair play to you mate, sounds like an awesome little project.

Dont worry about people telling you its not worth doing anything to it. Remember you are modding the car for yourself and not for others and you'll be just fine..... trust me, i'm going to lower a diesel!

  • Author

Weyy good lad!

As I said, I did expect the "slap on the hand",

I originally bought it coz it was gna be cheap on petrol insurance, etc, and I was 19.

Now I'm 21, insurance is peanuts on it, tax will always be cheap given it's that size engine, I can afford to insure something a bit more juicey..

Yeh, i see your point, but I'm 2 years older now, and just love my car too much to just get rid of it!

Even tho it's given me soooooo much shit since I've had it!

Oh by the way, yes, 6v! 10 less than you?

LOL it's a single cam, 3 cylinder engine..

It would be different tho, wouldn't it, it would have features to single it out from all the other usual polo's....

Or I might get the GT TDI and do that :lol: but that's faaaar too easy!!

Oh, yeh that's my (photoshopped) car in my avatar, I'm always up the brand hatch meet now! Currently on de-hubcapped steelies, might well have my alloys back on in tiem for the next meet.... and maybe the lower spoilers as well.. but that's a secret, different bumpers are going on.. very different!!

Olz x

Fair play to you mate, sounds like an awesome little project.

Dont worry about people telling you its not worth doing anything to it. Remember you are modding the car for yourself and not for others and you'll be just fine..... trust me, i'm going to lower a diesel!

i never told him not to...

aint dihatsu charades 3 cyliner turbos? granted its about as light as a chrisp packet.

whats the weight/bhp as standard?

  • Author

Yup, the charade is indeed a 1 liter 3 cylinder turbo! and they shift like nobody's business!

This is mainly what I wanted to base my engine on, I know they're different, but the same basics.

The original charade turbo only added about 15bhp to the engine, as it was sooo tiny! Then it went to the next generation, where they exploited that engine a lot more, fitted forged pistons as standard, and many other upgrades to the engine...

I would like to bore out my block a bit, and fit forged pistons, but a bit weary, as you can't remove the crank on the 1.2 engines :( as the block will distort itself... Meaning I can't go for a stronger crank.. dunno how the standard one would behave with more power being put into it...

Fair play to you mate, sounds like an awesome little project.

Dont worry about people telling you its not worth doing anything to it. Remember you are modding the car for yourself and not for others and you'll be just fine..... trust me, i'm going to lower a diesel!

i never told him not to...

aint dihatsu charades 3 cyliner turbos? granted its about as light as a chrisp packet.

whats the weight/bhp as standard?

fair point i just thought you were a little negative towards his plans but i guess you were just highlighting a few points.

of course with a little stripping a polo could be almost as light as a crisp packet too!

  • Author

hehe definately a "little" stripping!

Thinking of getting rid of excess weight, whilst keeping it ok inside...

All i need is dash, front seats.

HAHA you see that's where I'm not sure which road to go down.

Ideally I would like a good sound system inside, leather etc (i have a big time leather fetish :oops::lol: ) haha interior, or I just do a huuge stippage week-end lol!

I would love the look of it being stripped, but would equally love the look and feel of a compfortable and quiet interior.. Hmm :S not sure!

hehe definately a "little" stripping!

Thinking of getting rid of excess weight, whilst keeping it ok inside...

All i need is dash, front seats.

HAHA you see that's where I'm not sure which road to go down.

Ideally I would like a good sound system inside, leather etc (i have a big time leather fetish :oops::lol: ) haha interior, or I just do a huuge stippage week-end lol!

I would love the look of it being stripped, but would equally love the look and feel of a compfortable and quiet interior.. Hmm :S not sure!

ash shouldb takin his 6n to the next brands meet so u can see his stripped leather interior. ;) front seats.. dash.. no rear seats.. no stereo.

p.s photoshop of car looks good.

Edited by riskie

  • Author

excellent.. I'll keep an eye out for that one!

Thx x

excellent.. I'll keep an eye out for that one!

Thx x

u cant miss it!! just got 1st place in polo section at UDs last weekend.

incase u dont know it heres one of foxies photos of it from the weekend..

dsc2614oj7.jpg

the hard bit is gettin him to get it out the garage!! ;)

omg is this a 6v lol please say iys a 16v

2valves for each cyclinder. 16 isnt divisible by 3.

  • Author

OOOH THAT'S HORNY!!!!! :unibrow::drool:

  • Author

haha yep it is, 16 divided by 3 = 5.3333

this usually means you used to have a really unusual 6 valve per cylinder, and currently have a snapped cambelt which has wrecked the top end!

LOL

there is a 12V 1.2 engine as well, which is the 3 cylinder twin cam engine, putting out 65BHP, comapred to the 6v @ 55bhp... which is pants!

omg is this a 6v lol please say iys a 16v

2valves for each cyclinder. 16 isnt divisible by 3.

i thought it was a typo i didn't know they made that engine 1.2 6v 3 cylinders, but fair enough up to you what you do, keep us updated on how it goes, be interesting to see.

  • Author

I'll keep you all updated with the progress..... almost on 2 pages, and haven't even posted any pics yet!!!

My mates got a charade turb and its a monster!!!

Thats why I'm guna have to supercharge my mk3!!!

My car still handles better though.

It will be for sale soon (charade) so anyone interested???

Edited by silentbob1989

  • Author

Would be interested, but got too many projects already!!

2 projects on the go, Project Alfie the mini, Polly the Polo (god I'm sad!), Smokes, my 72 camper, an old skool Renault 4 post van, and a 94 T4 van Grrr!

Wanna do the mini first but getting addicted to the polo more and more!

Poor mini's being left out :(

just get a mk5 gti instead u'll never look back

  • Author

hmm i know, but i kinda need to stay with this car.. bit of the old finance left on it :-(

  • Author

and now some pics!!!!

Quite a few, mostly taken yesterday, during / after the oil change and full valet :p

Stoopid me put 1 footprint inside the car tho after valeting it hahaha

Anyway.. enjoy! let me know what you think..

I know its pretty much standard, but that's to change in the very near future :p

here we go...

there is a 12V 1.2 engine as well, which is the 3 cylinder twin cam engine, putting out 65BHP, comapred to the 6v @ 55bhp... which is pants!

There's also a 1.2 12v 70bhp engine in the Skoda Fabia. That's bad enough, I can't imagine what the lower ones are like. Foot to the floor, just a small bit of acceleration. Interesting 3cyl grumble though.

Here's the Fabia engine, it's 3/4 of a 1.6 16v! I though it was small but yours puts it to shame! You could fit that in your back pocket!

Funny as well when you see that the two engine bays are identical, shows the platform sharing at work.

skodafabiaengineig1.jpg

Worrying thing is you can buy a Fabia estate with the 1.2 12v engine - imagine that with a full load. Useless.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.