Skip to content

Mk3 Polo 1.6 Turbo - 261bhp

Featured Replies

I was round at a friends house today lending some moral support whilst fixing his G40. Constant snow storms meant copious amounts of time spent inside rather than outside working on the car. Anyhoo...we were flicking through some old PVW magazines and Pidge came across something I had never seen before.

A chap in Germany called Bernd Göhring has created a Mk3 Polo like none other I have seen before. Links below to scans of the article:

Part 1

Part 2

Part 3

The big numbers that got me reading on:

  • Power - 261bhp
  • 0-60mph - 4.1 Seconds
  • 1/4 Mile - 13.46 Seconds

I was quite impressed to see that someone has gone about turbo charging an N/A engine in what appears to be the right way. I am sure a lot of people are sick of seeing the same threads appear over and over in the technical forums asking about how to turbo/supercharge cars that were never designed to run forced induction. Personally I am not a fan of the decompression plate idea...or fannying around with low boost in an attempt to prevent the cars bottom end from giving in.

Zee German has used low compression pistons (7:1) to allow him to run large boost pressures (23 PSI). Just about every aspect of the engine seems to have been worked on from the head all the way down through the block. He's also paid attention to the handling and stopping by fitting uprated suspension and a big brake conversion. It must have had so much money thrown at it!

I'm not sure I am fan of the car as a whole but big respect for putting so much effort into something to make it work well. Quite how he got 16" wheels on without looking beyond ghastly I'll never know?

It mentions at the end of the article that he is still improving the car with a bigger turbo, new pistons and conrods. Does anyone have any more info. on this car as it is now?

What's everyone's thoughts on it? Can't believe I hadn't heard about it until today.

  • Replies 39
  • Views 4.7k
  • Created
  • Last Reply

Top Posters In This Topic

V.V impressive...am i right in thinking thats the 1st Turbo'ed mrk 3?

Not a fan of wheels tho :paranoid:

Fan of the engine tho :drool:

so, does this mean theres going to be even more parts sitting in you garage soon?

V.V impressive...am i right in thinking thats the 1st Turbo'ed mrk 3?

I wouldn't have thought so :lol:

Depending on how old the PVW is really, could have been the first :p

Is indeed very impressive! Hopefully someone can dig more recent info on it :thumbsup:

June 07 Phil, wouldn't have thought it's the first lol

Now that is one very serious Polo. Really not liking the big wheels but other than that its superb. The engineering and detail that have gone in to it are fantastic.

However, considering its very impressive quoted power and the huge amount of money thats been spent, the performance figures aren't hugely impressive IMO. Yes its obviously very quick for a Polo, but the standing quarter time is nothing to write home about. If its supposed to be able to get to 60mph in 4.1 sec, why can it only manage a mid 13 sec quarter mile time?

Obviously hampered by fwd traction off the line, you would rather hope it would come into its own once up to speed. My friend runs an Anglia turbo with circa 220 bhp (rwd obviously) and that runs regular low/mid 13 sec quarters (13.2 best so far). Yet it wouldn't manage 0-60 in much under 5 seconds due to wheelspin let alone 4.1 seconds!

I'd say that 4.1 sec. is either a bullshit figure or the owner has a problem with gearing or loosing boost mid track. It should be quicker than 13.46 sec.

Remember this- interesting how it's still a stock crank (albeit hardened), and Richard's right, 4.1 0-60mph and 13.4 1/4 mile don't add up...

I've got this issue, i agree though, the engineering that appears to have gone into the car is very respectful.

The article does say that it torque steers badly when the boost really kicks in, which might explain slowing down the 1/4 mile a bit.

Still, a very good car.

impressive that....bet it dunt go round corners

I remember that, found it hard to believe.

A polo feature in PVW!! :badgrin:

  • Author
impressive that....bet it dunt go round corners

Coilovers, LSD, subframe and lots of other trick bits...prob. better than the majority of Mk3 Polos...though I doubt it is an superb example of handling finesse.

Good point about 0-60 and 1/4 mile times...shame it doesn't mention his terminal speed.

I have that issue too and was mighty impressed with what he had achieved with that thing!

Nice bit of work there with the 1.6 AEE.

I know a 1.5 that will be getting near those figures when fully set up.

iv got this issue somewhere

is this the one that snaps driveshafts?

or is that the grey one with loads of carbon fiber

brutal car anyway (thats a good thing)

whats the point in spending that much money for 261hp.

please correct me if I'm wrong but surely he would get better results with a tuned 1.8 turbo conversion?

I'd rather have a 1.6T

Nice bit of work there with the 1.6 AEE.

I know a 1.5 that will be getting near those figures when fully set up.

Beavis is almost there already with the 1341 in the tin can

Edited by G40NUT

Doesn't surprise me. Karlos probably has a 250bhp+ build lurking about too.

whats the point in spending that much money for 261hp.

please correct me if I'm wrong but surely he would get better results with a tuned 1.8 turbo conversion?

You go fit a 1.8T to a Mk3 Polo :lol:

whats the point in spending that much money for 261hp.

please correct me if I'm wrong but surely he would get better results with a tuned 1.8 turbo conversion?

You go fit a 1.8T to a Mk3 Polo :lol:

http://www.polo20v-turbo.de/

Doesn't surprise me. Karlos probably has a 250bhp+ build lurking about too.

That guy is just a myth

  • Author
whats the point in spending that much money for 261hp.

please correct me if I'm wrong but surely he would get better results with a tuned 1.8 turbo conversion?

You go fit a 1.8T to a Mk3 Polo :lol:

http://www.polo20v-turbo.de/

Yup that guy managed it, but I doubt it was done in a weekend with a hobby tool kit and a few bacon sandwiches to keep him going.

mmmmm lets chop up the chassis legs: http://www.polo20v-turbo.de/index2/der86c2...au/Salzmann.htm

Edited by Tav

whats the point in spending that much money for 261hp.

please correct me if I'm wrong but surely he would get better results with a tuned 1.8 turbo conversion?

You go fit a 1.8T to a Mk3 Polo :lol:

http://www.polo20v-turbo.de/

Yup that guy managed it, but I doubt it was done in a weekend with a hobby tool kit and a few bacon sandwiches to keep him going.

mmmmm lets chop up the chassis legs: http://www.polo20v-turbo.de/index2/der86c2...au/Salzmann.htm

your right, it probly wasnt done in a weekend but then nor was the 1.6turbo.....so whats your point?

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.