Skip to content

Track polo..

Featured Replies

Alrite guys, sorry that my first post here is a question - its usually more polite to make a "hi iam new" thread but meh :p

Basically iam wanting some more info on the polos suitability as a track car. we have just had a track spec clio in and iam kinda interested in building one myself. i just want to know the basics like how they are handling wise and engine options. and all round suitability. iam more of a golf guy so I've never really taken any sort of notice to polos. i love the look of the mk3 coupes but never found myself thinking about buying.

anyone else looked at this before?

ta :)

Edited by daviE-k

  • Replies 22
  • Views 2.2k
  • Created
  • Last Reply

Top Posters In This Topic

Welcome,Dave. Anyone else looked at this before? Not for a couple of days.. See what the search feature brings up,there's lots about track/rally prepared cars here,and a few owners are rarely far away. The front suspension seems the weak spot as far as outright handling ability goes,no wishbones on the car you mention,but they're great fun if that's what your track days are primarily in aid of.

There are alot of bits and pieces you can buy for a Mk3 to get it trasck ready

Forst port of call would be subframe and polybush's ,Uprated suspension ect ..

There are a few high spec'd G's on here and a couple of full on track cars too .

You are looking at serious money for a track prepared G40 so it maybe worth looking at Golfs just depends on your budget?

Go for it! Best off getting one of the stage 2 or 3 subframe thingies that yoof does and polybushing everything, lowering a bit etc etc. G40 engines are capable enough, can get a lot of power out with the right mods... but the cost will add up if you're going all out with lsd's and other bits...

Welcome to the forum. I think if your building something track specific there are better cars out there than mk3 Polos!

Welcome to the forum. I think if your building something track specific there are better cars out there than mk3 Polos!

lol thats what i feared to be fair. I've just always had a soft spot for the mk3 :p just don't know a whole lot about their track potential :p

Welcome to the forum. I think if your building something track specific there are better cars out there than mk3 Polos!

......... you know something I agree 100% with that statement :-( ......... but I have always fought for the underdog, and when the little guy beats the big guy the victory is so sweet :-)

Same here. But if the little guy is the MK3 Polo,what would you call the MK1 Golf? Hardly any bigger or heavier,they're two little guys. And i know which one id choose for the track! But yeah,a 205 with a 406 2.0 in it? Few hundred quid. And that's likely to shift and handle better than a MK3 Polo with twice the money thrown at it.

I like mk3s as well. I'm building one myself, I know there are better cars out there but I'm not building it to be the best. I'm building it to be something I enjoy!

the problem with a mk1 golf track car as I see it is that they are getting hard to find and expensive. Even the newest mk1 is going to be 25 years old now. Even nice and clean looking ones will probably be hiding a reasonable amount of rust when you strip them out for track preparation. You can get mk3 polos that are only 14 years old and they cost peanuts. MK2 golfs would be easier, and they can be made to be pretty light too, they're always going to be 100kgs or so heavier than a mk3 polo though with the same amount done to each.

Also if you bend of crash the shell you wont be as bothered, just pick up another cheap-as-chips mk3 shell and swap everything over.

It doesn't take that much really to make a mk3 polo handle reasonably well, especially now yoof & co are selling those subframes at a fraction of the cost of Salzmann ones are.

Personally, I already had my G40 converted GT before I got interested in doing track days so just used that. In hindisight a mk2 golf might have been a better option (well less work and money to get it to a similar state) but I think there's something special about hammering past "proper" cars in an 18 year old shopping trolley on a track.

it all comes down to how much you really want to use a polo, personally i think a mk3 polo and a pug 205 look pretty similar, so the aesthetics shouldnt put you off the peugeot, you wont need as bigger budget for a 205 in terms of modifications, and you are starting off on a step up from the polo in terms of track use (handling and engine options).

theres a damn good reason why ALOT of people use 205s as low budget racing machines. the scope for a competitive car is greater with the 205 than a polo.

i feel dirty for bigging up a peugeot :(

The G40 can live with more powerful etc car's on a circuit.

Bear in mind that the car was in a new spec totally untested with a guessed set up, the first time it had been driven in over a year was from the truck to the grid on tyres I had never ran on before and everyone else in the 30 car grid had previous experience on the set-up's etc they were running so there is a bit more time to come out of it yet.

The XJS is 500 bhp and the M3's and Corrado are all around the 350 brake and the Rovers are over the 230++ mark.

Result from Combe

1st Ken Lark VW Corrado VR6 1:21.065

2nd Robert Payne BMW M3 E30 1:20.771

3rd Brian Stevens Jaguar XJS V12 1:21.616

4th Anthony Gorman BMW M3 E36 1:21.687

5th Graham Meeks Rover 220 turbo 1:20.941

6th John Willcocks BMW M3 E30 1:21.113

7th Anthony Wright Rover 220 Turbo 1:21.600

8th ME VW Polo G40 1:21.662

9th Ian Clark Ford Capri GXL 1:24.300

10th Michael Daly BMW 320 E30 1:25.211

11th Liam Crilly BMW 318i E30 1:2..412

12th Andrew Partridge BMW 320i E30 1:23.920

P.S........ no sub frame fitted

Edited by g40motorsport

Ever considerd a metro Gti ?

Ever considerd a metro Gti ?

As what, something to stand and laugh at?

Ever considerd a metro Gti ?

As what, something to stand and laugh at?

To find a good metro GTi would be hard even if you wanted one. They have all been eaten by rust, someone i know used to own one. Pokey enough but the rust was a virus that money or god could not stop.

Ever considerd a metro Gti ?

As what, something to stand and laugh at?

have you not seen some of the oldschool ralying / track driving metro gti's handle miles better than any polo . Mileeeeees better ..

Car Cancer is gay :cry:

Edited by StevieDavison

Personnally I wouldn't use a polo.

I tried and failed, the costs were too much and the car just wasn't enough so required more money.

The 205, clio or Golf is the better option, of the three for a pick up and buy as standard I would look at clio williams, throw some decent tyres and brake pads at it and have fun.

For an all out project I would buy a RWD jap car, an MR2 or RX7 for example. Cheaper to buy, insure and modify with better power and reliability than the european equivelants.

Ever considerd a metro Gti ?

My mate used to be hooked on them! It was as nippy as a G40 upto 65/70 and then VW all the way!

Thankgod his addiction was cured!

The 160bhp 1.8 16v aluminium-block vvt engine from an MG-F fits straight in a Metro and Rover 100. Solid-mountable Subframes front and rear,coilies from the mini scene are cheap.. Sounds like a no-brainer to me. Id wanna use a 5dr in Kensington spec just for the comedy value.

I've done all the research.

Basically we wanted something to hillclimb in the sub-1400 class. This meant looking at small hatches such as Polos, 205s, Fiestas, Metros, Novas etc.

Started off looking at Metro GTis (1.4 16v 110bhp), but they were all too expensive really, looking at £800 for a non rotten, mechanically good one needing a little work. So started looking at GTAs, next in the class with the 1.4 16v with SPi, 85 bhp I think. But again... they were all rotten or needed the displacers replacing etc. Basically they have a lovely engine and suspension but absolutely terrible body!

Then my dad said 'why not do it to a Polo? You know about them!'. Well... £1300 for a G40 with 115bhp, far too expensive. Or £600 for a 75bhp GT with an engine that is very difficult to tune. Plus the front suspension needing some serious work.....

So moved onto the fiesta... the XR2s are too big engine-wise. The 1400s were well down on power (barely makinng 60bhp!) and really quite expensive for what they were.

Novas.... looking at the SR which seem to make quite a premium over any other model, but tuning parts are plentiful. Almost perfect.... until you start looking at the 205 XS.

We start with the 1360 8v all alloy engine making 85bhp as standard. Not too shabby? Well 130bhp is well in reach of the DIY tuner! Due to the popularity of the GTi the suspension, brakes, beams, subframes etc can all be upgraded for pence. Rollcage? £300 off the shelf from OMP. The 205 is well known to be the best handling small hatch of the lot out of the box, and they are galvanised from the factory so most are still pretty rot free.

And then we come to the best bit. £150 will buy you one in not-to-bad condition with a bit of T&T! Yes, that's 'better than GT' performance for a fraction of the price.

We ended up with a Roland Garros (XS with plush bits):

DSC03361.jpg

P4040075.jpg

From personal experience I wouldn't say that a Metro GTI handles any better or worse than a G40 - though my experience is limited to several thousand miles in a 75k GTI that didn't have much juice left in its hydrospaz system. It was even the MPI model, so 105bhp - used to feel quick, but it could be outdragged by a Polo GT with induction kit/chip/4-branch. Still, I got it free and it was relatively rot free! Sold it to pay for a G40-lader rebuild once the MOT expired.

If you're building a track car, I don't think you need a wishbone/subframe conversion to be competitive - you just make the rear of the car very very stiff like the cup car racers did so it can move around. Not a car you'd want to drive on the road though!

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.