Skip to content

mk4 polo just purchased

Featured Replies

firstly hello clubpolo..

just bought the g/f a dragon green mk4 polo (p reg) 1.4 8v... and was just after a few bits of advice..

now please dont hate me but i`ma peugeot man and drive this:

Photo-0055.jpg

but rather than force another french bean tin into the household I've gone all kraut..

I've seen a few similar ones on here and have always respect for the marque..

my plans arent that much as she only needs it for everyday commute but..

debadged grill?? I've seen a couple of types o/e slat type minus badge and a mesh type... is there any particualr brands to stick with for quality and fit??? (french stuff varies wildly)

also been thinking about a subtle drop 40mm.. can this be done with just springs?? please bear in mind its never gonna get hammered or took on a track...

and lastly rims.. its got some 5 spoke factory ones (they look 14`s but didnt check!) i`d like to go up to maybe 15 or 16 am i safe sticking with most from the VAG range?? she`s definatly not into euro so shcmidts and ronals are out...

thanks in advance and no doubt i`ll be on now and then once we collect it..

stu

  • Replies 21
  • Views 1.5k
  • Created
  • Last Reply

Top Posters In This Topic

haha gone all kraut.pug looks nice. you can get a kamei grill which is like a mesh grill, or a slat grill. i personally prefer the badgless slat ones which you can get off the bay, venom motorsport, or in the for sale section which is really useful for parts.

as far as springs go the cheapest way to do is it using jackson tuning off here (philj) there cheap and cheerfull, look in the sponsored sections and you can see the different lowerage on 6ns from te different kits.

your wheels are the 16v standrd wheels by the sound of it, but agin for sale section is always good for wheels, have alook through the members gallery for ieas not everyone has scene euro wheels (although i do :-p:badgrin: :grin: ) got to love them :lol:

hope this helps

jonny

Edited by jonnyblease

oh yeh and get some pics up :grin:

Jonny has pretty much answerd all that :lol:

Nice looking pug 8-) anymore pics?

Was that pug one of those 1.4xsi badboys? little nippy bastards!

Looks like it, i nearly bought one in that same blue before i got my AXGT :-D mnay years ago

Lovin that Pug - i nearly bought a 1.6 XSi but one side had been resprayed and i walked. A mates girlfriend had a 1.4 XS and sold it without telling me. Gutted. Well,6n Polo - nice present for yours! One thing though - its not a German thing. Its Spanish!

the pugs a 1.6 xsi... well it was injection.. but as some of you may be aware the french cant even wire a 13amp plug let alone an ecu.. so it was all ripped out and its been on bike carbs for 4 years..

Photo-0058.jpg

as for the polo...

yeah i prefer the look of the debadged slat type grill...

no pics as yet as its going away to have a couple of bits of bubbly paint sorted on the arches....

will try and get some this afternoon as i`m off to pay for it...

stu

Welcome to the forum :D

well...

deposit paid..

and here it is....

Photo-0043.jpg

Photo-0045-1.jpg

thats mint it has 16v f &r bumpers and rear 16v lights looks nice

Thats an SE jonny mate same as mine from the manc meet if u remember I've got full leathers 2 go in now though :D

thats mint it has 16v f &r bumpers and rear 16v lights looks nice

does it????? lmao i`ll take your word on that...

out of interest were there many interior trim options as the drivers seat bolster worn through and i`d like to replace that if its a common fabric...

Ill have the same interior for sale soon if u need anything pal

yeh i remeber it mate its nice

dane- many thanks mate... haven't had a good look inside it other than noticing the drivers seat looking threadbare (hard to miss really!!) no doubt it`ll have a few niggles due to age but feels bolted together a lot better than the french stuff i`m used to...

106 is looking good :-p :-p

Enjoy rattle-less motoring ;)

You were three years ahead of me with the bike carb conversion,i ran my '88 Polo on them with a 1.6. Was quick - I bet that doesnt hang about either. You not tempted to use the 16v engine?

What carbs did you use? and Mikey? i may go down the bike carb route on my nova (1.6 16v from corsa gsi), i was going to go with T40`s (DCOE being the my first choice) or if my wallet stretched that far - TB`s 8-)

But i might be tempted with bike carbs :unibrow:

You were three years ahead of me with the bike carb conversion,i ran my '88 Polo on them with a 1.6. Was quick - I bet that doesnt hang about either. You not tempted to use the 16v engine?

the 16v pug engine is a very good bit of kit but..

1- it weighs an extra 30 liko`s

2- the inlet ports ae oval not round so the inlet manifold needs to be a bit more complicated

3- you can`t just bolt a dizzy onto the twin cam head so its either remap the std ecu or go onto ignition only ecu (both of which increase the cost)

at the minute the pugs running about 140 - 145 brake and a nice dollop of torque..

its on R6 units at the minute this is due to them being slightly smaller between the centres.. i have a set of R1`s at the workshop to for another project but on the pug the bigger spacing means the inlet manifold can foul on the engine mount...

compared to webers bike carbs are NASA tech... more like the old SU carbs than webers.. they hold there setting better than the old dcoe`s and are a fraction of the cost on good ol fleabay...

stu

I used 37mm Tei-hins from an '01 Honda CBR600F. (They're now on a 1.4,but I've changed plan again..) :grin:

Worked well - I've presented the argument for them on here,had alot of resistance but i think people are starting to see it. They're too loud for many,tho.

I'm tempted to fit some bigger ones to the Ibiza,and manual steering,but its just so dull i dont even think bike carbs can save it. :oops:

looks like a 16V (well bumpers and lights...) clear indicators too. looks sweet.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.