(middle one) Sytec pro-flow regulator adjustable from 1-5 psi, chrome finish with 6mm tales. Very little use, £13 posted or collected from horton in slough, or addlestone.SOLD

(Left) Adjustable regulator suitable for reducing pressure from a high pressure injection pump to low pressure for carbs. It has a return to tank and turbo feed but is just left open on na engines. 8mm tailes, very little use as i was given a low pressure pump so no need for this regulator, £30.

Unused adjustable universal regulator for injection with pressure gauge, works from a vacuum on the inlet. £12 SOLD

Edited 6 May, 200818 yr by neb

would any of these work on my AEE engine ?? to boost the fuel pressuree !

i was thinking that but for a G40!

the one on the right will i think as long as it fits the fuel rail, i know you can buy adaptors though

(middle one) Sytec pro-flow regulator adjustable from 1-5 psi, chrome finish with 6mm tales. Very little use, £13 posted or collected from horton in slough, or addlestone.

(Left) Adjustable regulator suitable for reducing pressure from a high pressure injection pump to low pressure for carbs. It has a return to tank and turbo feed but is just left open on na engines. 8mm tailes, very little use as i was given a low pressure pump so no need for this regulator, £30.

Unused adjustable universal regulator for injection with pressure gauge, works from a vacuum on the inlet. £12

I'll take the one with the guage. Will you take £15 posted?

Edited 14 April, 200818 yr by deajam

bumpage