Skip to content

rear exhaust brackets on mk3

Featured Replies

my backbox doesnt get hot, just warm, you can put your hand on it and it wont burn you!

  • Replies 44
  • Views 4.7k
  • Created
  • Last Reply

Top Posters In This Topic

you can actually buy a repair section from vag, as its not part of the chassis its just spot welded on. if DK can get some brackets made that bolt to the existing main part of the bracket that would be great because you wont be damaging the actually shell as the bracket is hollow...its the little hangers that are on it that snap off. i'll be getting one of you Dan if you get some made.

my pikey methods involve a couple of tie wraps going through the hollow bit and round the backbox itself. easy peasy.

my bracket bent under the weight of my exhaust on a country road, well scary. held on with shoe lace and now the biggest, dirtyest zip tie ever hahah

is there not a bolt hole in the middle of the hangers? cant you weld a piece of metal with a hole on to the back box and bolt it on? mine has a bolt hole but i think its been replaced so many times now.

SHOE LACE! what a plan! I've got two shoe laces going spare... definitely resecuring it tonight!

I got fed up of my backbox falling off because my brackets are cracked!! so I bought another one which had a custom bracket fitted to it :D

Hasnt come off (yet) but seems pretty solid too!

I did this properly. Its a bad design,and had to be upgraded. I fabricated a bull-bar hanger out of 10mm steel rod,welded to a plate,and bolted that to the chassis. With the same design welded to the back box,i then linked them with two full size hanger blocks. I can now bounce my weight on the tailpipe all day long.

I did this properly. Its a bad design,and had to be upgraded. I fabricated a bull-bar hanger out of 10mm steel rod,welded to a plate,and bolted that to the chassis. With the same design welded to the back box,i then linked them with two full size hanger blocks. I can now bounce my weight on the tailpipe all day long.

Got any pics of that?

  • Author

Good idea pics of your attempts to sort out the common problem we all face lol

I've sent pics to people via mms,including some of this hanger. But yeah,I'm gonna have to sort out getting pics on here. I explain as best as i can,but you cant beat pics.

but you cant beat pics.

I am trying to understand you but you seem to be going round in circles

*hopes the clever folk appreciate the humour*

Mikey : can you email pics? If so send them to paul@polog40.co.uk and I'll put them on here.

I cant send emails,thats what makes the whole photobucket thing a bit tricky. I'm not online as such,i only have the phone and its web browser. Fones are advertised as able to do all manner of things,but the network provider/s dont offer the service of setting all this up themselves. I'll look into getting the notebook online.

My exhaust is welded on - Longlife special!!

Mines just one with 2 rubbers and the standard thingy....which is a bit bent. But it seems to take the strain of me hammering it around so ill leave it for now :) But the tailpipe is about 1mm from the bumper so it rattles against it, is this bad? :lol:

^^ obviously you aint hammering it around hard enough! :lol:

Edited by xcore

haha i think just about everyone with a mrk 3 has this problem...my exhaust fell off in a rather potholed carpark three days after i got it ha. its now got one of those locking screws through the bracket onto the body of the car with the rubber on aswell...if you get what i mean. haven't had a problem since but noticed recently the rubbers are starting to deteriorate. however my pipe leading from the back box to the middle section hangs rather low, how can i fix this?

my back box is always falling off....just keep a roll of speaker cable in back now lol soon as it goes, get the cable make a loop noose thingy what ever u call it out of the cable . wack it round zaust pull it through the car and tie around passenger side front seat head rest ... jobs a gudn man :lol:

never fear i'm in the process of making some.

Iwill post details up when there done

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.