i recently broke my 1.4 16v polo 6n (r reg)

two power steering racks one 6n and one 6n2 gti but are the same part. gti one comes with all pipes and bottle.

good condition been cleaned up £35 ea

6n subframe (16v only due to gear linkage mount, ideal if you are converting to 16v power!) complete with lower arms and anti roll bar £40 or anti roll bar seperate with brackets to fit any 6n £25

16v 6n/6n2 gear linkage good condition with ally stability bar that mounts to subframe £25

16v 6n only rear beam with built in anti roll bar, bare bar bushes good condition £20

6n grill surround (plastic) metallic pinky £5

6n 16v dark grey/black full dash and centre console, glove box missing exc condition all plastics included £30

6n passenger door fair condition, no known dents or rust. with glass and elec window mech (think motor is dud) £25

6n drivers side wing good condition £10

6n modified cross member behind bumper, trimmed to fit fmic. £5

6n 1.4 16v fuel pump £20

6n 16v front hubs calipers and carriers ideal for 280mm conversion or bolt on to you 8v as have bigger discs! £40

6n 16v bootlid with lip on roof tip with wiper motor window and loom good condition £40

6n 16v (late) full lock set for 3 door, door and boot handles with ignition switch + key (square type key) £30

6n glass sunroof and mech £10 if you come and remove it!

6n drivers door glass £10

6n drivers side electric window mech complete gwo £25 or take the whole door for £30

6n red set speedo, head light switch and heater panel all genuine red illumination £30

6n stalks £5

6n steering column £15

6n/6n2 16v servo and master cylinder gwo £15

6n2 abs unit and brake lines £20

6n 16v dash loom complete with elec window wiring and switches and fuse box £25

6n/6n2 wiper motor and linkage (front) £15

6n bonnet no dents, slight lacquer peel with sound deadening £20

6n washer bottle and motor and a few other small bits free to collector within a week

the car will be scrapped within a week so if you want something let me know asap and i'll get it removed.

polo 6n/6n2 lupo/arosa mk1 golf weld in 4 point tubular steel roll cage £40 to clear

polo 6n2 passenger airbag and airbag module £20

mk3 golf gti 5x100 pcd alloy flat faced sprayed cream good condition with centre caps £40 to clear

mk3 golf gti 8v b/n starter motor £25

g40 rear gearbox bracket and mount £5

mk1 golf gti oil cooler and pipes £10

mk1 golf chassis repair panels ~ 10 parts £25 the lot or £35 and i'll throw in a bonnet

mk3 golf gti head and block recently removed from mates 90K 2.0 8v gti rear ended ideal for mk1/2 upgrade £100

mk4 golf gti airbag steering wheel fit any post 1992 airbag vw £40

sports wheel black with silver centre £20

ripspeed wheel black with twin horn push £30

new momo wheel exc condition £50

bosch red injectors left over from my rallye £35

mk2 golf bonrath single wiper linkage and motor £20

mk2 golf gti early b/n polished alloy strut brace never fitted £20

pics upon request.

I dont suppose you have a passenger side electric window mech for a mk4 3 door?

I dont suppose you have a passenger side electric window mech for a mk4 3 door?

yes mate, got the mech but i think the motor maybe dead.

hiya bud, what colour is the drivers side wing? if its flash red do you have a grill surround aswell? and do you have a boss kit for the momo steering wheel?

regards

hiya bud, what colour is the drivers side wing? if its flash red do you have a grill surround aswell? and do you have a boss kit for the momo steering wheel?

regards

all body panels are pinky metallic and i don't have a boss for any of the wheels mate.

Hi mate have you got the interior seats front and back left and in good condition also a passenger central door motor?

6n subframe (16v only due to gear linkage mount, ideal if you are converting to 16v power!) complete with lower arms and anti roll bar �40

do u know if this will fit the 6n2 ?? will u sell without the wishbones and ARB ?? can u post ??

just need the subframe, as mine kissed a speedbump :(

Edited 3 June, 200818 yr by sum1's dad

6n subframe (16v only due to gear linkage mount, ideal if you are converting to 16v power!) complete with lower arms and anti roll bar �40

do u know if this will fit the 6n2 ?? will u sell without the wishbones and ARB ?? can u post ??

just need the subframe, as mine kissed a speedbump :(

yes mate same as the 6n2 cable change, you'd have to arrange your own courier but can box it up for you as i don't have a car at the mo and posty is 5 miles away!!

bosch red injectors left over from my rallye ?35

What engine(s) will this fit into?

do you still have the driver window mech? any pics o the roll cage?

bosch red injectors left over from my rallye ?35

What engine(s) will this fit into?

they were an upgrade for my g60 rallye.

do you still have the driver window mech? any pics o the roll cage?

yea still got it mate and if you want a pic of the roll cage pm me your mobile number fella.

:-D do you still have the pass door and can you supply a pic please

6n 16v bootlid with lip on roof tip with wiper motor window and loom good condition £40

What colour is the boot

I've tried to PM you but your inbox is full

Edited 8 June, 200818 yr by Roly

:-D do you still have the pass door and can you supply a pic please

its next to the hedge at the mo and the car has no wheels, it's pinky metallic.

6n 16v bootlid with lip on roof tip with wiper motor window and loom good condition £40

What colour is the boot

I've tried to PM you but your inbox is full

pinky metallic mate, sorry about the inbox.

you willing to post bits matey? I'm after the gti steering system (with the bottle and pipes) 16v front hubs, and possibly the roll cage. typical i want the heavy items or, how much of a detour is braknell from gti inters??

you willing to post bits matey? I'm after the gti steering system (with the bottle and pipes) 16v front hubs, and possibly the roll cage. typical i want the heavy items or, how much of a detour is braknell from gti inters??

not sure fella, brakes sold yesterday tho.

hi mate do u still hav the 16v bumpers ? front and back cheers

pm'd u about the lock set bud!! no reply??

pm'd u about the lock set bud!! no reply??

i did pm bk fella? should fit no probs.

any pics of the momo wheel or is it sold?

PM me :-D

Edited 24 February, 200917 yr by wyatt_adam

sold them all, i have another somewhere without boss.

please see here for any parts left

http://www.clubpolo.co.uk/forum/index.php?...=135937&hl=

iws the window mech off a 3 door and what colours the door my numba is 9752548218