Skip to content

charger rebuilds

Featured Replies

since psd are shut who are you all sending your chargers to?

G werks? or having a go yourselfs?

i was thinking or buying the kit of the g lader site and sending it into the local machine shop.

  • Replies 12
  • Views 1.7k
  • Created
  • Last Reply

Top Posters In This Topic

I'd recommend G-Werks, Darren is spot on with the quality of both parts used and workmanship.

Have experienced Darren @ G Werks customer service & knowledge of late whilst helping a friend get his charger service.

(It's not a plug & I'm not related so don't worry)

I can't speak highly enough; friendly, extremely helpful, reliable and spot on in everyway, he goes out of his way to answer questions and give factual answers. Nothing seems to be too much trouble.

In fairness if you deal/work with something long enough you will get to know something inside out. Experience is priceless so why not use it???

I have had friends try to service chargers themselves & it has taken them a few attempts to get it spot on, but maybe half the fun is having a go yourself??? Depends if you want to risk your Lader.

I have found another local place to me that does chargers for alittle under £200.

Depends what you personal stance is I suppose.

Edited by HoppyGTi

I will be using Darren for both my charger rebuilds, he's a decent guy and knows his shit.

I have found another local place to me that does chargers for alittle under £200.

spill the beans! who is it?

I have found another local place to me that does chargers for alittle under £200.

spill the beans! who is it?

A local place to me who speacialises really in headwork. His BVH's are very highly sort after in my area & is reasonably priced to be fair.

Must say that Jabba Sport are really good the guy that does all the charger work there is very helpful an knows his stuff, both my friends chargers have been there in there in the last few months & mine will be going there sometime this year.

i've done my own and never had issues... but then i read up, took advice and was pernickety. I don't like porting them tho - one slip and its dead... so wouldn't port again - i'm just too edgy!!! lol

I'm going to rebuild mine by my self but iv always been good with small very delicate stuff like this and i hate all garages never been to one yet!!!

I don't think Stuart was overly impressed with G-Werkes on this last rebuild. Took a week longer to reappear than they said it would and they told him the wrong belt length which left him £18 out of pocket. Saying that the charger works fine and I don't think he was always getting Darren on the end of the line.

I don't think Stuart was overly impressed with G-Werkes on this last rebuild. Took a week longer to reappear than they said it would and they told him the wrong belt length which left him £18 out of pocket. Saying that the charger works fine and I don't think he was always getting Darren on the end of the line.

Tav, I've just shown Darren this thread, and he's going to call Stuart about any issues he might have had.

I don't think Stuart was overly impressed with G-Werkes on this last rebuild. Took a week longer to reappear than they said it would and they told him the wrong belt length which left him £18 out of pocket. Saying that the charger works fine and I don't think he was always getting Darren on the end of the line.

Tav, I've just shown Darren this thread, and he's going to call Stuart about any issues he might have had.

that would be good service that like :-D

I don't think Stuart was overly impressed with G-Werkes on this last rebuild. Took a week longer to reappear than they said it would and they told him the wrong belt length which left him £18 out of pocket. Saying that the charger works fine and I don't think he was always getting Darren on the end of the line.

Tav, I've just shown Darren this thread, and he's going to call Stuart about any issues he might have had.

It was just to do with postage. Said it was sent out on a certain day and it took ages to appear. Spoke to Rob I think who suggested the wrong belt size, G60 size probably. No biggy though just made a mistake. The belt that your suppose to use ended up being a little on the long side as well as it ate its self after stretching out a little, currently running a 1000 length as it was the only spare we could get a hold of in the middle of Scotland with no way home and it's doing good.

He's got a G-werkes chip + G60 injectors for them and that's all fine. You'll never get 100% success rate but I would always use them over other companies available I think. Kenny with the G60 lives locally to me so I can just look at that to see what sort of work they do.

Don't think there's any need to ring Stuart, he might get a shock at that :lol:

Would be nice to see someone pick up the G40 market and keep us a float with bits.

Edited by Tav

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.