Skip to content

BREAKING, MK3 COUPE OPEN TO OFFERS, NEED IT GONE!!!

Featured Replies

now breaking..mk3 polo cl 1.3, NZ engine, ASAP!!

hi guys,

I AM NOW BREAKING

make offers on what you want... seriously you will get a bargain!!

need gone ASAP..

i have a mk3 1.3 NZ (multipoint injection) registered as a 1.3 S.P.I.. with no M.O.T..

it needs a c.v boot, track rod end(possibly) and a cat fitted as it has a fourbranch..

thing is i dont have the time to do this or finish my little project, i really just need a cheap to insure on the road car..

my car has the following..

front upper and G.E.D lower strut braces,

OMP rear upper strut brace..

K+N Filter, SOLD!!!

polished mk4 smooth rocker cover, polished dizzy,

slotmag alloys (custom never made in VW fitment) SOLD!!!

it has been lowered on shocks and springs.. SOLD!!!

smoked front headlights, G40 rears, clear front indicators with smoked sides..

pressed number plates,

F1 carbon fibre custom mirrors,

Fourbranch manifold, de-cat, straight through to custom euro backbox..

momo steering wheel,

CD player,

recent service and brand new fuel tank fitted..

it has plenty of tax but as I'm working alot i cant get round to sorting the M.O.T...

NOS kit with 10LB nitrous bottle and all fittings.. SOLD!!!!

CBR bike carb kit, with bogg brothers manifold, SOLD!!!

cheers Dene

MAKE AN OFFER ON ANYTHING!!

07891384637

Rear pic was before mirrors and new driver side rear light

Edited by Dene4638

  • Replies 43
  • Views 3.8k
  • Created
  • Last Reply

Top Posters In This Topic

Make: Mk3 polo

Model: 1.3 AAV Square

Year/Reg: H reg

Mileage: 112 off the top my head

MOT: None but will put a fresh mot this week comming

Tax: None

Good points: Lowered 60/60 new top mounts (done about 500 miles), Standard wheels and tyres also comes with g40 bbs ra's with slicks (Could be good for santa pod), gt seats, just had the head gasket done with head skim, water pump cam belt, new clutch release bearing, new track rod ends, vw type 2 front brakes.

Some might remember my GT/G40 rear axle rebuild with new handbrake cables, drums, shoes, springs, powder coated

Bad points: Couple dings on the body work, alittle rust on one wing.

Location: Andover Hamphire

Pictures:

P1140063.jpg

P1140061.jpg

P1140060.jpg

P4140021.jpg

P3130047.jpg

P3130046.jpg

pm me if your interested

  • Author
This car is super tidy had a look at it when i went to pick up some seats a few months back form this bloke ..

Seams liek a top guy and he knows what he is on about when it comes to VW's :nod:

haha thanks for that mate.. how did you get on with your trip!? :lol:

he does know his stuff about cars, and has built some pretty nice ones

but mate you seriously need to stop modding your cars :lol: arent you getting tired of not being able to actually insure any of them and putting serious hard work/cash into the mods?!

good luck with the sale, very high specced lil polo. tis a shame you cant enjoy your hard work, msis the yellow coupe s as that was a beaut

and thanks for that pal.. i am gutted i cant get around to finishing this one, and i've finally just accepted insurance is gunna kill me until my convictions are removed in 2 years.. :-( (damn driving my mk2 GTI underage :-( ) :lol:

Il have the headlights if your thinking of breaking

  • Author
Il have the headlights if your thinking of breaking

tbh they would be the last things id sell, as i dont have replacements and want to sell the rest first.. bike carbs, nitrous etc..

  • Author

more pics ...

enginneee... :) 8-)

any ideas of power output you are getting, and i take it that the carbs are fitted and set up working, because in 1st post it said you were going to b puttin on carbs and possible nitrous

  • Author
any ideas of power output you are getting, and i take it that the carbs are fitted and set up working, because in 1st post it said you were going to b puttin on carbs and possible nitrous

the carbs are on and running but the throttle bracket i made is a little weak so needs strengthening.. and i dont know how bike carbs run on a car engine but on idle they are lumpy.. but I've been told thats how they are.. all the standard injection will go with the car too so it can be switched back if wanted and i have the nitrous kit, just havnt fitted it as its sigle fogger system and i wanted to make it a twin.. would need a few more fiitings or jus fitted as a single..

no idea of power output as i havnt even had it on the road!! :-(

  • Author

this car is THE sex mate, shame you cant drive round init! How much if you do split r you lookin for the bike carbs and setup pm me back cheers gaz

Edited by tarn polo

if i can sell my passat 20vT, i will be intouch mate

How much you looking for the wheels if you sell seperate and whats the sizes.

Cheers

  • Author
How much you looking for the wheels if you sell seperate and whats the sizes.

Cheers

hi mate i would be taking offers on everything, and I'm prett sure they are 7x13s and have 175/50/13 tyres

what were the wheels off originally? i have a set of ford ones i'd love to fit but dont know how to modify to fit? what would i need to do?

info would be much appriciated

joe

  • Author
what were the wheels off originally? i have a set of ford ones i'd love to fit but dont know how to modify to fit? what would i need to do?

info would be much appriciated

joe

you have to drill the original bolt holes out slightly, and make spigot rings that fit tight in the wheel and then to the hub so the wheel sits centre at all times.. (just a matter of turning some out on a lathe)

i may be braking the car now as i have a few offers on seperate parts..

i believe if u dont ask u dont get, so make offers on things, whats the worst tht could happen!!

cheers Dene

thanks mate finally figured out what a spigot rings were had no idea before :lol: i'll offer mine up wen i get chance see which i prefere 14" BBS's or 13" slotmags winter/summer wheels maybe :D or show/running about wheels :D cheers

  • Author

BUMP 1000 for the lot?

cheers..

if only i had the money, good seller, the previous owner of this car went to my college!

where you based?

and would there be any deal with my fiesta giha 1.25 zetec s?

  • Author

based in ammanford near swansea.. sa18 2hl

and no not really I'm afraid, was after the money really otherwise i wuldnt be selling it :(

going to buy a quad to go back and fourth to work as they are the cheapest things for me to insure..

cheers

right decided to add a list incase anyone is interested...

car with everthing ..... £1000

car without nos ... £850

car without nos n carbs ... £600

car without nos, carbs, wheels .... £450

cheers Guys

Dene.. 07891384637

Edited by Dene4638

  • Author

late night bump..

  • Author

up.. :p

up.. :p

hi you iv just got my polo done over but I'm lookig for a clean shell if you would sell it ?wb

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use Privacy Policy Guidelines

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.