Skip to content

Say that hypothetically...

Featured Replies

I had just bought a scruffy Mk2 Polo Coupe for less than scrap money with 10 months MOT and a blowing exhaust, and was hiding it in the DT centre at school without telling my parents... who had previously put their foot down and said no more cars.

What should I do with it?

Ideas please, remembering that the budget = what I can fabricate in a well equipped workshop. It is currently tornado pink and has slightly crusty front wings.

Kart011.jpg

/\ those were done in said workshop ;) Idea #1

  • Replies 31
  • Views 2.8k
  • Created
  • Last Reply

Top Posters In This Topic

I'm just interested, but how are you managing to hide at your school?
I'm just interested, but how are you managing to hide at your school?

behind the bike sheds init

its a bording school iirc so anythings possible :lol: coilies banded steels and engine work i say.....

  • Author

Boarding school, i'm good mates with my DT teacher and they have a car bay :D

I'm thinking more chopped springs, banded steels, grey primer ;)

could you fabricate golf rallye style arches and banded wheels?

theres some pics of a golf rallye style mk2 somewhere

I had just bought a scruffy Mk2 Polo Coupe for less than scrap money with 10 months MOT and a blowing exhaust, and was hiding it in the DT centre at school without telling my parents... who had previously put their foot down and said no more cars.

What should I do with it?

Ideas please, remembering that the budget = what I can fabricate in a well equipped workshop. It is currently tornado pink and has slightly crusty front wings.

Kart011.jpg

/\ those were done in said workshop ;) Idea #1

dude... you banded your own wheels???? :-o

this is why there was a crackdown on them in thaq late 60's early 70's... :?

did you use a lathe/jig?

I'm fairly certain he knows what he's doing :p

I'm fairly certain he knows what he's doing :p

yeah, thats what people thought back then too.

persoanlly i woulda machine welded them...

i understand wide-wheels are ripoff so i can see why he's done it, an if he's used a lathe or jug then they should be fine...

the lathe would only really be useful for the parting of the wheel where the "band" is going in, the dodgy part is welding the band in square otherwise they'll never balance and drive like egg shape wheels. with the correct materials and expertees theres no reason why they would be unsafe.

  • Author

Have a look at the fuck off massive lathe in the background..... ;)

Bands were made on the rolls from 3mm thick 50mm strip then the ends ground down so that they butted up perfectly. The whole wheel was then tacked together and spun on a hub to make sure that they were straight, before being welded up fully.

I know what i'm doing ;)

Edited by AdamP

Some sort of urban camouflage? You could park it outside your house and your parents would never even notice it...

  • Author
Some sort of urban camouflage? You could park it outside your house and your parents would never even notice it...

In my neighbourhood....? Anything older than 4years HAS to belong to me! :lol:

the lathe would only really be useful for the parting of the wheel where the "band" is going in, the dodgy part is welding the band in square otherwise they'll never balance and drive like egg shape wheels. with the correct materials and expertees theres no reason why they would be unsafe.

actually you could use the lathe when welding up too... geared right down, with a welding arm... seen it done before.

Have a look at the fuck off massive lathe in the background..... ;)

Bands were made on the rolls from 3mm thick 50mm strip then the ends ground down so that they butted up perfectly. The whole wheel was then tacked together and spun on a hub to make sure that they were straight, before being welded up fully.

I know what i'm doing ;)

spot on kiddo!

like a retard, i missed the lathe!

fancy doing me a set? :p

also lemme kno if you want tips on sealing em up!

scrap it= profit

what boarding school you at?

i went to one (didnt board though) in berks

Edited by xcore

  • Author

Tips on sealing them.... e-poxy resin, or 'Z-pozy' is what I use.

I wouldn't want to band wheels for someone else tbh! Such controversy over it I wouldn't want the risk etc.

Scrapping it would mean profit, but it is also boring. :p

Tips on sealing them.... e-poxy resin, or 'Z-pozy' is what I use.

I wouldn't want to band wheels for someone else tbh! Such controversy over it I wouldn't want the risk etc.

Scrapping it would mean profit, but it is also boring. :p

i reccomend tiger-seal and an old credit card or the like to spread it with. also where your inner meets the drum, make sure there is paint down there...

no risk. on my head! really fancy a set of 16" for the passat but dont wanna pay wide-wheels silly money!

  • Author

Wouldn't get 16" on there anyway, 14"s max!

urban camo, widened steels and sell me them mini 10's ;)

wouldnt mind some cheapo banded steelies....

  • Author

Wish I hadn't mentioned it now :p

chopped springs???? :retard: dont start that arguement again!

you know I'm up for it if you decide to make banded steels to sell.. :unibrow:

I badly want some MK2 fiesta steels banded lol. if only the stud pattern was anywhere near close!

If you do start banding lol....

As for hiding the car.. haha awesome! I've gotta figure a way of hiding a landrover from my mom lmao! Don't really know how I'm going to go about doing so though. not something that you can really hide.

Edited by B-shaw

What do you do at school out of interest. Like what are you studying cause you seem to know a lot of stuff for a young lad!

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.