I have a GT short block for sale.

It was fully re built and only covered roughly 2000 miles before i decided to drop a G40 lump in.

New parts were -

Mahle Pistons with a full re-bore

New Oil pump and chain

new bearings

All new gaskets

balanced rods and crank

new clutch (inc release bearing)

Lightened flywheel

Included will be the block assembled with the sump.

Unfortunatly i used the head on the G40 as this was a TSR pack C head.

This cost me well over £600 to build

£100 ono

Please feel free to ask any questions.

if you want to come and look at it your more than welcome (i live in poole).

Whats it been be re-bored to?

And I'm probably wrong but weren't all gt lumps short block?

When Wayne says short block he means with no head on it, not that the block is short in length.

Well worth the cash, it was a bloody quick gt

Lee

I have a GT short block for sale.

It was fully re built and only covered roughly 2000 miles before i decided to drop a G40 lump in.

New parts were -

Mahle Pistons with a full re-bore

New Oil pump and chain

new bearings

All new gaskets

balanced rods and crank

new clutch (inc release bearing)

Lightened flywheel

Included will be the block assembled with the sump.

Unfortunatly i used the head on the G40 as this was a TSR pack C head.

This cost me well over £600 to build

where is pick up from ?

do u have the gt ecu and inlet ??

£100 ono

Please feel free to ask any questions.

if you want to come and look at it your more than welcome (i live in poole).

Loaction is poole in dorset

GT inlet is on the G40 now :-D

Got all sorst of GT bits, Need to have a good ol rummage and dig it all out.

Cheers lee, saved me answering that one..... :-)

I'm near birmingham so il see if i can travel down to dorset , i have a 1.3 cl do u think it would work with my head injector ecu etc on you are shortblock because its only monopoint

Sold:)

Hi, As rich4130 said..... is now sold.

Back up forsale!

Sorry..:(

il have it if i can run it on monopoint