Skip to content

Vr6 Mk4 Conversion

Featured Replies

There's a guy on Volkszone doing a VR6 conversion on his friend's polo. I thought people on here might be interested. Ever wondered how much fabrication is involved? Look at this:

http://www.volkszone.co.uk/VZi/showthread.php?t=509694

The guy whose doing it is a total nutter (I mean that in a nice way) - he's currently fitting an R32 conversion (complete with 4WD) into his Caddy pickup. And before that he put a T5 Volvo engine in the back of a Beetle!!

  • Replies 28
  • Views 2.9k
  • Created
  • Last Reply

Top Posters In This Topic

Haha...

"yep i totaly agree with you i did tell the guy the rear would be better ,but he wanted the buggar in the front (sillyman)lol his fault as he will pile this up in no time ,,thatsfor defo...,too mutch weight,,will be ok for his quarter mile sprints,i reckon,,,he may have to get rid of his car amps and add a nice rear water tank lol ,that ill lower it and handle a little better

haha that thread is so funny....

I agree just read all 5 pages !! :lol:

yeah was rite funny

he had a NVQ was it? in engineering, then asked what our jobs were

it'd already been locked when i wanted to reply

yes mate..if your reading, i dont work in mcdonalds or at the checkout in sainsburys

am an aircraft technician...means i know abit about good engineering...and what good welds look like!

rant over :)

8-)

lol uve been dying to say that....

was it that obvious

i was soo ready to write a comment then noticed it was locked :lol:

Lol Neil..

Tbf though, there probably are people working in supermarkets, or anywhere like that, that are really good mechanics.

Loads of people passed mechanics course at my college and got a diploma, and they still cant do bugger all on a car.

reading through the thread, it looks as though he has a welding fetish! I wouldnt wanna trust the welded driveshaft tbh.

look on the caddy forum, see his caddy project.

TBH, I'd trust a set seeing how he does it.

they're a lot cleaner on his own car.

yeah was rite funny

he had a NVQ was it? in engineering, then asked what our jobs were

it'd already been locked when i wanted to reply

yes mate..if your reading, i dont work in mcdonalds or at the checkout in sainsburys

am an aircraft technician...means i know abit about good engineering...and what good welds look like!

rant over :)

8-)

nothing wrong with the welds i have seen to be fair..

however you would have though the d/s weld would have been done using friction wleding technique. but as long as its true thats the main thing.

as far as how qualified he is who cares, hes got off him bum and done it - have you

them welds look mearly tacked in place...no rubbing down before hand or owt like that was visible.....they dint even look straight

what you mean by got off his bum n done it - have you...?

being an a/c tech you will know that a/c welds are generally cnc and then NDT tested.... hence straight, unform and astetically pleasing -

the guy has done this on his arse with a mig what do you expect?

seeing as most of it is new metal, that has been welded onto a cut bit of car what more pre welding prep do you want?

Edited by bobby_hill

touche

the point am getting at, is they look rushed

am sure if you were in the same situation...i.e what looks like welding a engine mount on

you'd spend abit of time duin preperation

howd you know so much about A/C and NDT :ninja:

howd you know so much about A/C and NDT :ninja:

i am chief shelf stock in safeway, we have to know about welding incase any of the trolleys loose a castor.

yes they look rushed, but its for a mate for a laugh as far as i have determined off other sites.

Id just like to point out that his caddy is a) an amazing bit of fabricating and that i could only dream of having such mad skills and b) the caddy is for the track only so it doesnt matter if he snaps a d/s!

...the vr6 polo however, I'm assuming is intended for road use...

VR6 Polo would be great fun in a straight line.... though would be even more fun if the engine was in the back powering the rear wheels.... plus it might handle better too!

:ninja: ...as for the T5 engines..... I've got one sitting in an S60 which is mine in 2 years time.... for free. It'll be staying in the S60 though, for A; the leather seats, B; complete sleeper... :D

Polos can't compete with the luxury of Volvos.

My 88 Polo had no luxuries what so ever other than a cassette player.

My 89 Volvo had.. electric windows, electric sunroof, outside temp gauge, heated leather seats, electric mirrors, power steering, air conditioning and head light wipers

Both cost about the same money to! Plus its was much safer and the heaters were much better.

Shame its been locked i was going to offer to race him for pinks at the pod next year :lol:

Oh well

want there a polo on here before that had a vr6 in it? or am i mistaken?

to be fair the welding on the subframe to strengthen it up looked fine to me and the welding on the temp front engine mount thing was only temp so doesnt really matter.

Yup it was the Gold one used it alot for track days he was selling it a couple months back not sure if its sold though

recently i was going to build a twin engined mk2 golf (but xmas and rocco got in the way), i could only dream of fabrication of that standard tbh :lol:

although i think the problem that people have with this lad is the way he seems to think its the bestest/fastest polo ever (think back to the tread about who 'would' of come second in the show and shine), i think that just rubs people up the wrong way. tbh there maybe better ways to get power from your mk4, but not many will sound as good as this, its never gonna handle well but have you ever driven a golf vr6? :lol:

the welding may not be pritty but theres no reason it should be as dangerous as people are trying to make out... but thanks to the owners attitude it would be funny to see it get owned on the rollers buy a 1.3 :lol:

I read the 5 page thread & tbh I think things have got out of hand on this one.....once again people have puffed their chests out and have picked holes in everything and have missed the point of this project...............regardless of what skills & qualifications people have.

So the owner got a bit lairy and claimed it was going to be quick, tbh he didn't have a clue what the thing is going to be like.....just because it's a V6 he thinks it will out drag everything.

Far too many people just bit far too hard on the 5 page thread & turned it into a free for all.......maybe the owner set out to wind people up??

BUT.....

The guy that is building it is simply doing it for the fun of it and because he can; as people think it is simply not possible!!!!

He loves the challenge....he'll make it work, it may not be pretty but I reckon he will set the trend & as always it will be refined.....this is the next level.........

Give him a break for it!!! So he may not have designed anything & is making it up as he goes along....some welds might be temporary while he mocks things up & gets a better solution to a problem and then reworks. I thought this was what build thread were about??? At least he's not hiding anything like many would!!!

Handling doesn't come into this guys head at the mo I don't think....he just wants the VR in there & running, the other bits can come later.......some of his other work & mentality which can be found on the net is awesome.

I for one would let him have my truck to put something special in there....because I simply don't have the skills or knowledge to do this....but I somehow think a 1.8 20VT would be too simple for him!!!

I for one just want to see the thing at the RR day, the owner can stay at home.....but the builder of it I wanna see

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.