Skip to content

Anyone thought of starting again?

Featured Replies

I own a 1.4 8v 6n and have gradually done it up over the past 3 years or so. I love the motor but often want for more power from her.

I saw a decent valver on autotrader the other month and was 99% sure i was gonna drive to manchester from sheffield to get it.

So from that i thought about selling mine. I didnt realise how much I've done to it and all the effort and bollock aches I've gone through to get ther looking the way she does! so in the end i thought fuck that right off I'm not going through all that shit again! Its come a fair way IMO and the thought of having to do it all again just simply put me off!

sourcing parts and getting someone to fit tthem is such a pain sometimes! Then again. Suppose thats half the fun. I've probs become lazy. Or have less enthusiasm than i used to have.

I'm now looking into a 6n2 1.4 16v engine conversion. not that it will ever materialise knowing me!

-Lee-

  • Replies 24
  • Views 2.1k
  • Created
  • Last Reply

Top Posters In This Topic

I haven't even driven my improved car yet to decide if i should cut and run. My hands always seem to live in my pockets when dealing with my car.

Now my bready is a different matter...................

is it worth the effort for the slight increase in power?

maybe fit a bigger engine?

just a thought. :)

I know what you mean, I've had my car 2 years now, getting fed up with the lack of power, but I've become attached to it. Sooner or later you will find the perfect car and bite the bullet.

8v to 16v? Think outside the box....................

  • Author
is it worth the effort for the slight increase in power?

maybe fit a bigger engine?

just a thought. :)

my current produces 60bhp, any increase would be good! mk5 100bhp 16v engine would b perfect.

100 bhp 1.4 16v engines are hard to come across! most of them are 75bhp so watch you dont get bumped.

Mk5 16v is 75 bhp dude

Edit: beaten to it lol

Edited by Rod Stylz

Was gona say, the 6N2 16v isnt 100, only the 6N ones were 100bhp... and i have 3 :-D

Edit: proper beaten to it!

Edited by Renegade440

if your looking for speed, youl soon get bored of whateva car you get, and want more power

Go Jap.

:lol:

i thought the 6n2 did a 75 bhp model and a 100 bhp model? both valvers

Go Jap.

:lol:

x2 i would if i could insure something

On one hand i need something to keep me busy. A nice new project is appealing.

On the other hand,I've tried a few engines in my Polo now,and it seems a waste to leave the knowledge to go arid whilst i go and have several nervous breakdowns,building a throttle bodied 1.2 16v 6-speed Ciquecento sporting,or six carbs on a BMW 3.5 straight six in an MGC GT..

So for now,i shall just enjoy.

hmmm this topic went quickly off topic lol

i keep thinking that i should just give up sell the car and start again...I'm never gonna be happy, theres always something new too add to it.

I'm currently looking at bankruptcy and if i have to declare, then i would have to forfeit the car :-( in which case id have to start again, probs is, if i had to do that i dont think id want another car as it wouldnt be the same.

youve got to ask yourself though and i do, why on earth do we do it?? none of us get magazine features and its only those of us in to these cars that really appreciates them

why bother

i thought the 6n2 did a 75 bhp model and a 100 bhp model? both valvers

That is true, 75bhp versions are alot more common though.

I have to ask though, why the 6n2 engine, why not just go with an AFH ? :?

  • Author
i thought the 6n2 did a 75 bhp model and a 100 bhp model? both valvers

That is true, 75bhp versions are alot more common though.

I have to ask though, why the 6n2 engine, why not just go with an AFH ? :?

dunno, 6n2 engines more likely to have less miles as they are newer? if an afh came along then i'd probs go for that. THEN the dilema of getting someone to swap them for me :-S

  • Author
i thought the 6n2 did a 75 bhp model and a 100 bhp model? both valvers

That is true, 75bhp versions are alot more common though.

I have to ask though, why the 6n2 engine, why not just go with an AFH ? :?

dunno, 6n2 engines more likely to have less miles as they are newer? if an afh came along then i'd probs go for that. THEN the dilema of getting someone to swap them for me :-S

oh and i know that most 6ns 16vs r 75brake, thats why i want the 100 one!

A drunk latvian made this 'starting again' choice for me.

I too never realised how much work I and others had put into my old black valver.

Almost 5 months on and my new red one is still not up to the standard the black one is, still needs a visit to the body shop and some small servicing parts.

All good fun though.

is it worth the effort for the slight increase in power?

maybe fit a bigger engine?

just a thought. :)

agreed... if you going to transplant, do it right! 2.0 FTW! :thumbsup:

is it worth the effort for the slight increase in power?

maybe fit a bigger engine?

just a thought. :)

agreed... if you going to transplant, do it right! 2.0 FTW! :thumbsup:

y is fitting a 2.0 doing it right??

I'm gonna be doin a valver converstion during the winter, either 1.4 or 1.6 then sticking carbs on it probably.. I'm going down this route cause my car handlings like a dream at the mo and dont wanna be sticking a heavier engine up front and ruining it.... also wanna keep the sump as high as to allow me to sit as low as without worrying bout it.... :-)

is it worth the effort for the slight increase in power?

maybe fit a bigger engine?

just a thought. :)

agreed... if you going to transplant, do it right! 2.0 FTW! :thumbsup:

y is fitting a 2.0 doing it right??

I'm gonna be doin a valver converstion during the winter, either 1.4 or 1.6 then sticking carbs on it probably.. I'm going down this route cause my car handlings like a dream at the mo and dont wanna be sticking a heavier engine up front and ruining it.... also wanna keep the sump as high as to allow me to sit as low as without worrying bout it.... :-)

well done that man, keep the fun factor of the car.

is it worth the effort for the slight increase in power?

maybe fit a bigger engine?

just a thought. :)

agreed... if you going to transplant, do it right! 2.0 FTW! :thumbsup:

y is fitting a 2.0 doing it right??

I'm gonna be doin a valver converstion during the winter, either 1.4 or 1.6 then sticking carbs on it probably.. I'm going down this route cause my car handlings like a dream at the mo and dont wanna be sticking a heavier engine up front and ruining it.... also wanna keep the sump as high as to allow me to sit as low as without worrying bout it.... :-)

well done that man, keep the fun factor of the car.

Defo... :-D :-D

is it worth the effort for the slight increase in power?

maybe fit a bigger engine?

just a thought. :)

agreed... if you going to transplant, do it right! 2.0 FTW! :thumbsup:

2.0 from what? presuming you mean the ABF 16v from mk3 golf/seat ibiza gti, cordoba 2.0 sx, which are only 150bhp, and are tall blocks so will need a bit of work. Might aswell spend a little bit extra and 20vT it

Id say put a 1.6 16v engine in, from mk5 (6n2)/ lupo gti, theres a few people on here who have done it, rindiesel and dubprince to name a couple. 125bhp, i dont think its alot of work to fit either

I'm quite happy with my 8v :p

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.