Skip to content

Polo 1.6 16v GTI Rear Brake Setup+Exhaust System...

Featured Replies

Hi folks...i have the following for sale if anyone is interested:

Polo GTI rocker cover- whoever wants to polish it/paint it-£60 requires cams being set up again.

Polo GTI FULL interior wiring loom- consists of:

Interior loom with fusebox,

2x door looms,

boot lid loom,

engine bay loom,

injector harness.

£100 SOLD

I also have a set of: keys, immobilisor box and ECU for a polo GTI engine (all are coded with each other)-£100

OR wiring and immoilisor set up for £180 collected. SOLD

I basically have a full conversion but the engine is apart...so inlet manifold/exhaust manifold, throttle body etc...

All ancilleries too!-PLEASE SEE BELOW POST FOR BREAKDOWN..

Rear disc set up-still on axle- consisting of-calipers, carriers, handbrake cables everything!-£100

Please ring me or text me on: 07815893331-Sanjay or PM me but my inbox is getting full...so bare with me...

I am open to offers...but not silly ones please.

All items are COLLECTION ONLY- NN3 NORTHAMPTON

Edited by DubbPrince

  • Replies 65
  • Views 2.7k
  • Created
  • Last Reply

Top Posters In This Topic

if you still have the bottom end and rear axle when i return from oz i will snap your hand off sanj

Christian

  • Author

Christian- when are you back mate as i could hold onto them if you're serious... 8-)

PM sent mate....added you on facebook too mate!

alright pal, just out of interest, when doing the 1.6 bottom end conversion on a 6n 16v, what sort of things need to be changed other than gearbox etc? a mate of mine said it was pretty much plug in and play but I'm not so sure??? cheers.

Edited by corky

  • Author

sorry dude...i wouldnt know. I have a full GTI spec mk4...not a half breed. :lol:

GTI BOTTOM END NOW SOLD. 8-)

sorry dude...i wouldnt know. I have a full GTI spec mk4...not a half breed. :lol:

GTI BOTTOM END NOW SOLD. 8-)

haha, fair play mate. hope everything else sells well.

  • Author

Gearbox sold...

  • Author

BUMP...

Anyone wanting the interior wiring/engine wiring+Key,ECU,Transponder box/coil can have them all for £200. This is all you need to start a GTI in a mk4/mk3 polo... 8-)

Also have:

GTI exhaust manifold-ideal upgrade for the AFH 1.4 16v guys-£45 delivered.

2x GTI Inlet manifold and throttle body-£50 delivered for each.

2x GTI flywheels (ideal for lightening)-£50 delivered for each.

GTI rocker cover with cams-£60 delivered.

256mm vented front GTI brake setup-includes hubs,calipers,carriers possibly hoses too-£100 collection. SOLD

GTI Rear disc conversion-includes everything as it is on the axle inc. handbrake cables-£120 collection.

I will be at Edition38 all weekend and live 5mins from the venue- Mobile: 07815 893331-Sanjay.

Edited by DubbPrince

Brake setup sold pending my collection. cheers

Damn I'm only round the corner from you!

You on The Headlands?

  • Author

no mate...ecton brook...

let me know if you want the rear disc setup mate... :-D

  • Author

bump...

  • 2 weeks later...
  • Author

BUMP

  • Author

BUMP...

  • 2 weeks later...
  • Author

BUMP- all still available bar the bottom end of course...

Wiring, ECU, Transponder bits, Key...the lot. Everything required to start and run a GTI lump in a mk1-mk5 polo or ibiza...anything really.

Rear brake setup still available- complete with handbrake cables and everything you need.

  • 2 weeks later...
  • Author

BUMP- PLEASE PM ME OFFERS...

The Mk5 rear disc set up dosn't fit to a Mk4... am I correct?

  • Author

yes it does...just not the axle. Basically i have a whole axle with everything attached so that the buyer can take it apart and transplant it onto a mk4 easier than me selling them the parts seperate and them having to figure out how the bits attach.

I can of course fit the set up at cost of my time-2-3hrs...i'll charge about £100 to fit.

  • Author

BUMP- PRICES HAVE BEEN UPDATED... 8-)

You still got one of the flywheels?

  • Author

yes matey i do...you're most welcome to it. £30 :-)

  • Author

BUMP...

Alright mate, do you still have the bottom end also?

  • Author

fraid not dude...only have the head and other parts. :-)

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.