Skip to content

6n 16Vs Being Broken

Featured Replies

Just had a quick browse through the breaking section and spotted no less than 13 valvers being broken, that was just on the first two pages. Have people gone mad?

  • Replies 19
  • Views 1.6k
  • Created
  • Last Reply

Top Posters In This Topic

na they just realised its full of rust and the gearbox is fucked lol

Probably as its easy. Pettsey had a 16v up for £500 (3dr, black) and it still took a few weeks to shift.

Credit crunch - they're worth more in bits han they are as a whole

Dunno about the rest of the car,but the engines are well worth having,and there are lots of options tuning them.

I'm the only one i know of who's converted one to 1.6 litres with just a few internal changes,keeping the original block. Doubt I'm the first but I'm sure i wont be the last.

Shame about the 6n shells but the engine's are good for the galvanised 6n2s. And anything pre-94..

cos there cack and everyone and there slutty sister has one ;)

(and yes I've owned one before we go there) for a matter of three days before i sheared the driveshaft off at the cv

and a mates owned one that blew its headgasket four times....

horrid horrid cars...

:lol:

they fecth pennies breaking them i made over 1k on one and it onlycost me 300 sheets!

and i did not over price anything, gave some parts away, and still have some bits!

bought me my splits....i will be buying more in the future! :p

i no a nice white mk4 open air(rare) that is currently being broken tucked away in a garage if anybody wants to go get bits of it pm me

:ninja:

you are a douche! you wouldnt want it its rusting :lol:

cos there cack and everyone and there slutty sister has one ;)

(and yes I've owned one before we go there) for a matter of three days before i sheared the driveshaft off at the cv

and a mates owned one that blew its headgasket four times....

horrid horrid cars...

Ha unlucky :lol: :lol:

Dunno about the rest of the car,but the engines are well worth having,and there are lots of options tuning them.

I'm the only one i know of who's converted one to 1.6 litres with just a few internal changes,keeping the original block. Doubt I'm the first but I'm sure i wont be the last.

Shame about the 6n shells but the engine's are good for the galvanised 6n2s. And anything pre-94..

Mikey, What power is your car runnning at and what is the rough spec? would be really interested to know!

my 16v is fine only had a few small problems i reackon they built loads duds.

Shame there's not some more GTI's breaking as i could do with some interior parts!

Dunno about the rest of the car,but the engines are well worth having,and there are lots of options tuning them.

I'm the only one i know of who's converted one to 1.6 litres with just a few internal changes,keeping the original block. Doubt I'm the first but I'm sure i wont be the last.

Shame about the 6n shells but the engine's are good for the galvanised 6n2s. And anything pre-94..

Mikey, What power is your car runnning at and what is the rough spec? would be really interested to know!

I've not yet had it on a rolling road. But i predict about 140bhp,with the carbs set for a slight efficiency bias. Pretty sure i could crack 150 but there's no point - its so responsive its always useable,and the power it has goes a long way in a 715kg car.

The spec's simple,and its all OEM apart from the bike carbs.

Info can be found in a topic called 'GTi block and AFH head info needed' but i cant give the link atm as I'm on a phone.

Dunno about the rest of the car,but the engines are well worth having,and there are lots of options tuning them.

I'm the only one i know of who's converted one to 1.6 litres with just a few internal changes,keeping the original block. Doubt I'm the first but I'm sure i wont be the last.

Shame about the 6n shells but the engine's are good for the galvanised 6n2s. And anything pre-94..

Mikey, What power is your car runnning at and what is the rough spec? would be really interested to know!

I've not yet had it on a rolling road. But i predict about 140bhp,with the carbs set for a slight efficiency bias. Pretty sure i could crack 150 but there's no point - its so responsive its always useable,and the power it has goes a long way in a 715kg car.

The spec's simple,and its all OEM apart from the bike carbs.

Info can be found in a topic called 'GTi block and AFH head info needed' but i cant give the link atm as I'm on a phone.

195bhp/tonne i'm not suprised it's quick!!!!! It must suprise a fair few modern 'hot hatches'!!!

My mates has a 1.6 AFH in his Lupo on Jenveys and that doesn't half shift so I can imagine it would be really impressive in a wee little polo.

cos there cack and everyone and there slutty sister has one ;)

(and yes I've owned one before we go there) for a matter of three days before i sheared the driveshaft off at the cv

and a mates owned one that blew its headgasket four times....

horrid horrid cars...

Ha unlucky :lol: :lol:

haha fuck off ;) still made double what i paid for it to some lil mummys boy ;)

It can take the piss out of some fast cars on the bigger roads,but its not very tractable at lower speeds and its too much faster than traffic speed to be able to kick it - The ABD was more fun to kick about in busy town traffic,less was more there. Its now great for touring though,a proper GT.

Well its a good engine in any case,as standard they're probably the best sounding non-supercharged factory Polo ever made,but parts are getting dear. I remember when a set of HT leads were typically £10-15 quid but they're like fifty and up for this thing now,and as my 1.6 still uses all AFH parts I've still gotta pay double price for things like cambelt and head bolts.

Even still,I'm considering buying another AFH to store for the more substantial spares,in case anything gets really broken with this one. Especially if they're in their moment of availability,as that wont last forever.. And i cant see me looking to any other engine - the hydraulic roller-rocker head is fussy,i dont like 'charged,and i think VVT is a flawed science.

The AFH is a simple valver design,sports tuned cams with the biggest ports of any small-block,takes any ignition,its a no-brainer.

cos there cack and everyone and there slutty sister has one ;)

(and yes I've owned one before we go there) for a matter of three days before i sheared the driveshaft off at the cv

and a mates owned one that blew its headgasket four times....

horrid horrid cars...

Ha unlucky :lol: :lol:

haha fuck off ;) still made double what i paid for it to some lil mummys boy ;)

I've had mine for exactly four years now, didn't expect I'd keep it this long but it has been utterly reliable and never lets me down.

Won't have lost fuck all money on it either, I am so glad I bought it :-)

My mates has a 1.6 AFH in his Lupo on Jenveys and that doesn't half shift so I can imagine it would be really impressive in a wee little polo.

this has m well and truely inspired!

awsome car it is!

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.