Skip to content

major trouble getting to e38

Featured Replies

so me and my mate...who was in a c4...err....i was in my mk3...jus fixed the engine problem on monday...lasted 5 days before blowing head gasked on the way don to fucking e38!

so we got to a service station there was....

mk3 polo gt...

mk3 golf...

mk4 polo 1.4 16v...

golf mk2 abf in white...

and a punto diesel...did look good though

just about to pull out.. we all deceided to spin those tires...i did this too, due to me missing a washer on the front of the anti role bar, OSF wheel rolled forward so i was trying to see what happened...driving round with bonnet up and sat in engine bay..then noticed wheel was sat p against shit guard...

checked role bar...it had just slipped...no biggy...then the 1.4 16v did same...spinning those wheels...then a bang, and lost drive. thought it was a shaft...noop...i said it would be a clutch problem...then someone said clutch release bearing has been going for ages...

not sure who thee guys were btw....probs will post here..i hope...lol sound guys....

if this was u...let me know what happend.

we got going again. guy driving polo got recovery and think he went down in a 20vt?

so with my role bar not right i took it slow...those guys we were at services went....

me and ben going up m60 i pulled over due to lack of compression... let it cool down...got going again...btw i ran out of water...had to bump it though...so about to get onto m62..i missed j12 as ben sad to keep right so i did and i stayed on m60 :S...goon...and polo died...head gasket has gone...

no more e38 for me, my passenger is going down today...i am now going to skint myself in order to get the mk3 back up and running....

  • Replies 26
  • Views 2.5k
  • Created
  • Last Reply

Top Posters In This Topic

Whoops! Sounds like you had abit of fun.

Sounds like karma to me, remember kids driving like a knob will bite you in the ass lol!

Sorry no sympathy here

should have toped up evrything befor heading off

and wheel spins FTL :retard::thumbsdown:

lol haha serves you right

you may say err to his c4, did his head gasket go? is his anti roll bar coming off? does he have drive?

all part of the fun i guess

got a c2 and a classic mini, i understand!

Where abouts were you? I met some bloke in a GT in a shell garage just outside stevenage last night, I was in my mk2golf (going to collect an aircooled type1 engine) and he was on his way there...

MAybe i'll go to the next one, dude hope you get the gasket sorted, my fiancees mk3polo's head gasket blew the day after we got it, 100miles from home, had it up and running again 3 days later and only cost 25ish quid for the gasket set from GSF.

Steve

Sounds a right shitter.

Luckily I'm only round the corner from Edition ;)

then a bang, and lost drive. thought it was a shaft...noop...i said it would be a clutch problem...then someone said clutch release bearing has been going for ages...

Lol, Clutch release bearing might be a slightly optimistic diagnosis there! :shock:

Lol, Clutch release bearing might be a slightly optimistic diagnosis there! :shock:

:nod:

i was thinking that too. lol

*cough* gearbox! lol

I didnt understand that?

tis hard reading that..

but karma.

Spinning wheels ftl

seems a good job i didnt wait to convoy down with you! gutted car broke fella.

gutted

paul one word,

MULE!

tis hard reading that..

even more so after a heavy weekend session down at ed :lol:

think i saw your car driving around the show on Saturday? unless theres another red mk4 on them rims? looked good either way.

to head gasket guy, i've got a spare MH 1.3 engine you can have if you need a cheap fix?

yeah was probably me mate!!

was there saturday and sunday

should have said hello, i had loads of randoms saying hello :lol:

yeah was probably me mate!!

was there saturday and sunday

should have said hello, i had loads of randoms saying hello :lol:

mate you were way too far away to say hello to (you were driving around the out side road bit) and just to put things into perspective at about this point i was lying against my car feeling sorry for myself and getting nutty nougat bars chucked at my head (thank you saf lol) so its safe to say i didn't have the energy to come and find you :lol:

:lol:

fair enought

SAF i didnt see him either, bugger :lol:

  • Author

lol thanks for the encouragement guys...then again my own fault....

jus going to say a split ater pipe was my problem....

then a bang, and lost drive. thought it was a shaft...noop...i said it would be a clutch problem...then someone said clutch release bearing has been going for ages...

Lol, Clutch release bearing might be a slightly optimistic diagnosis there! :shock:

not me who said it, i guessed something wrong with the cluch..if it was clutch release it shouldnt be ale to engage while engine is runnning..

paul one word,

MULE!

get fucked lol

tis hard reading that..

even more so after a heavy weekend session down at ed :lol:

think i saw your car driving around the show on Saturday? unless theres another red mk4 on them rims? looked good either way.

to head gasket guy, i've got a spare MH 1.3 engine you can have if you need a cheap fix?

well i hve litteraly juch chnged the engine, but what u looking for it? might be needing a new head if is warped...pm me about it mte :thumbs up:

sympathy fail.

yeah was probably me mate!!

was there saturday and sunday

should have said hello, i had loads of randoms saying hello :lol:

mate you were way too far away to say hello to (you were driving around the out side road bit) and just to put things into perspective at about this point i was lying against my car feeling sorry for myself and getting nutty nougat bars chucked at my head (thank you saf lol) so its safe to say i didn't have the energy to come and find you :lol:

nutty fuckin nuggets =D

and to the original poster, its a bit retarded giving your car bastard when you missing a like 10 pence washer which you knew about.

the fact that the anti roll bar is the only real thing holding your two wheels together and if that had happened on the open road you could have swerved and killed someone...

i think its quite amusing that you all broke down, shame you couldnt make it but hey youll probaby think twice about doing a job properly the first time!

  • Author

well if i new my washer was missing i wouldnt have drove it...we didnt breakdown due to this...it was because a water pipe split and drained the water so head gasket cooked......

and yeah you are damn right about swerving...few bumps in road scared shit out of me.

plus now I'm not going to skimp on anything with the rebuild...taking my time i have learnt my lesson.

well i hve litteraly juch chnged the engine, but what u looking for it? might be needing a new head if is warped...pm me about it mte :thumbs up:

mate its just sat in my front garden waiting till i can be arsed to weigh it in so if you collect you can have it for nothing mate. the engine was fine but the gearbox was fucking up so i swapped it for a TD.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.