Skip to content

New polo black 6n 1.4 16v!

Featured Replies

Hi everyone, i've spent a few weeks reading the forums but this is my first post.

I recently bought my volswalken polo 1.4 16v 5 door 1999 model, which I love!

There are a few things i plan on doing too it as it is in pristine condition and a few light touchups and I'm hoping to transform it into a headturner!

First off it is black and the paintwork could do with a bit of work so i've touched up the minor scratches it has with filler and I'm hoping to buff it all in the next few weeks. If that fails and I'm not happy then I'm hoping to have it all repsprayed to black, good idea?

i've bought lowering springs for it and I'm hoping to take it down around 50mm, it has standard run of the mill wheels on it along with the standard polo alloys which i quite like!

i've bought another chrome polo badge for the back as i dont like the current one at all! (it looks like it was drawn on by a child!)

I'm going to purchase a k and n air filter as the ones i've heard on youtube really do sound lovely! but i dont know which one to get, could anyone possibly get me a link to one on ebay that i could purchase?

the car seats on my polo aren't very attractive, a sort of purple old womans colour mixed in with the grey! so i've purchased some lovely urban-x leather look car seat covers from ebay. Has anyone used these before? they could turn out to be attrocious but for £27, i thought i'd give them a try!

these are the first of the modifications that I'm doing to my car, I'm welcome to any advice.

Thanks for help!

pics to follow! 8-)

  • Replies 16
  • Views 2.1k
  • Created
  • Last Reply

Top Posters In This Topic

welcome mate...youve got off too a good start there by buyin a 16v :-D most of the mk4 drivers would have one if it wasnt for the insurance factor on new and young drivers.

certainly youve got the best idea as number 1 there, if you can get it resprayed back to the original colour and have fresh paint to play with. before you do though decide what bodywork you want as it would be best to get those done first (i.e arches rolled / smooth bumper or boot / debadge & de bump stripping / removing aerial & side repeaters / filling in any recesses)

those are the standard bodywork options so have a think and look in the gallery and decide what you want too do first!!!

Personally i think youve made a mistake with buying springs and you should have bought a set of coilovers so you can adjust the ride height till your happy as 50mm is not alot (again check the gallery)

standard valver alloys and interiors are not attractive but they are practical, in the future you might want to replace the alloys as they dont look that good when youve created a nice car lol and if you want better seats, look into getting golf recaros or ibiza cupra leathers, again i think youve wasted £27 on covers lol

K&N ----- NO!!!!!!!!!!!!! absolutely crap, no point unless you get a panel filter! spend a bit more and get a bmc induction kit - these actually will improve the car

  • Author
welcome mate...youve got off too a good start there by buyin a 16v :-D most of the mk4 drivers would have one if it wasnt for the insurance factor on new and young drivers.

certainly youve got the best idea as number 1 there, if you can get it resprayed back to the original colour and have fresh paint to play with. before you do though decide what bodywork you want as it would be best to get those done first (i.e arches rolled / smooth bumper or boot / debadge & de bump stripping / removing aerial & side repeaters / filling in any recesses)

those are the standard bodywork options so have a think and look in the gallery and decide what you want too do first!!!

Personally i think youve made a mistake with buying springs and you should have bought a set of coilovers so you can adjust the ride height till your happy as 50mm is not alot (again check the gallery)

standard valver alloys and interiors are not attractive but they are practical, in the future you might want to replace the alloys as they dont look that good when youve created a nice car lol and if you want better seats, look into getting golf recaros or ibiza cupra leathers, again i think youve wasted £27 on covers lol

K&N ----- NO!!!!!!!!!!!!! absolutely crap, no point unless you get a panel filter! spend a bit more and get a bmc induction kit - these actually will improve the car

i was looking into getting leathers but i coudn't for the life of me find any! how much are you talking for leathers like that?

the only reason i wanted to get a k and n is purely for the sound, they sound pretty cool i wasn't really after a big perforance boost but if them bmc kits are cheap i would consider it.

i haven't thought about the bodywork at all, is it much work to get the arches smoothed? how do i go about debadging the front grill? it seems that if i done that i would be left with a hole where the vw sign used to be..?

the springs i got are Jamex Lowering springs kit - VW Polo 6N 40/30mm drop - no good?

haven't considered alloys yet, how much are they?

complete newbie here!

there have been loads of leathers up for sale in the for sale section, i myself was selling mine for £200 with an interior in exchange also.

the K&Ns are pointless and for £50 they're just not worth it, a bmc is gonna be about £100 + but will be so much better than having a K&N as the insurance change will be the same regardless of what induction kit you declare.

the springs youve got are probably good, but so pointless, if you can return them, do so!! coilovers are the way too go!! the debadge grille is an entire grille that you buy which doesnt have a vw badge at all.

my best advice too you is SLOW DOWN, i made a fair few mistakes when i first got my polo, nearly 2 years later and I'm much more diligent with what i buy. dont rush into purchases, look through this website and get ideas, decide what you want to do before you just start throwing parts on it. its your car and your project so you need to enjoy it but if you rush then you could be wasting your money and end up replacing parts later

  • Author
there have been loads of leathers up for sale in the for sale section, i myself was selling mine for £200 with an interior in exchange also.

the K&Ns are pointless and for £50 they're just not worth it, a bmc is gonna be about £100 + but will be so much better than having a K&N as the insurance change will be the same regardless of what induction kit you declare.

the springs youve got are probably good, but so pointless, if you can return them, do so!! coilovers are the way too go!! the debadge grille is an entire grille that you buy which doesnt have a vw badge at all.

my best advice too you is SLOW DOWN, i made a fair few mistakes when i first got my polo, nearly 2 years later and I'm much more diligent with what i buy. dont rush into purchases, look through this website and get ideas, decide what you want to do before you just start throwing parts on it. its your car and your project so you need to enjoy it but if you rush then you could be wasting your money and end up replacing parts later

to be honest i wasn't looking for major upgrades - just a nice looking polo that wasn't standard, lowered slightly, rear lights done and just made to look a bit newer by spraying it, seat covers etc. not looking to spend more than £500 really as i had the car very cheap to begin with. the seats have interested me quite alot, if someone offered me nice looking leather ones for £200 i would probably go for it! its just i haven't got a clue what I'm looking for lol. the reason i was going for a k and n is purely for the sound, the polo sounds like a hairdryer in first gear! not looking for a performance, how much bhp increase are my looking at in them bmc's you mentioned?

are red rear lights often sold on here? and front lamps? i've seen some lovely ones in the gallery but look quite expensive!

i thjink they were called fk powerlooks.

lots of questions, i hate being the noobie! lol

seanvw is right..its best to slow down and jus look throught the member gallery and look at the kind of things people have done and see what you like. i've been on here for like a year and half and leathers come and go but i didnn't know which ones would fit etc..your best looking for mk3 golf ones however they are quite rear.Half leather ibiza cupra seats fit quite easily i think. and be prepared to travel.you might think its a waste of time etc as i did but i enjoy going places to pick things up now and you get to see the thing in person. Rear lights always cme though the sale section and also on ebay.make sure u check ebay because you can find most thigns on there.Yeah the powelooks are nice aswell as the angel eyes.Again look through the gallery and ask the people for some help.I'm sure they will help.

i think springs are a mistkae.i had them on my first polo and ahted them whereas coilovers are the shit.U can change them to your liking and that makes a big difference. Rims are for me the most important thing.a good set can make your car look awesome and with your base car they will look extra special. black 1,4 16v is a good place to start mate

as for the bmc, they are quite expesive and seeing as you have a kand n now you may aswell stik to it and they do sound kinda good put a bmc sounds a lot better..bhp change wouldnt be that much I'm guessing but you already have a nice kick with that engine. hope iv helped mate

  • Author
seanvw is right..its best to slow down and jus look throught the member gallery and look at the kind of things people have done and see what you like. i've been on here for like a year and half and leathers come and go but i didnn't know which ones would fit etc..your best looking for mk3 golf ones however they are quite rear.Half leather ibiza cupra seats fit quite easily i think. and be prepared to travel.you might think its a waste of time etc as i did but i enjoy going places to pick things up now and you get to see the thing in person. Rear lights always cme though the sale section and also on ebay.make sure u check ebay because you can find most thigns on there.Yeah the powelooks are nice aswell as the angel eyes.Again look through the gallery and ask the people for some help.I'm sure they will help.

i think springs are a mistkae.i had them on my first polo and ahted them whereas coilovers are the shit.U can change them to your liking and that makes a big difference. Rims are for me the most important thing.a good set can make your car look awesome and with your base car they will look extra special. black 1,4 16v is a good place to start mate

as for the bmc, they are quite expesive and seeing as you have a kand n now you may aswell stik to it and they do sound kinda good put a bmc sounds a lot better..bhp change wouldnt be that much I'm guessing but you already have a nice kick with that engine. hope iv helped mate

thx for the reply, I've seen a set of lights for sale on here, lexus style ones and I've bought them off a chap on these forums, going to see what ther like, by rims do you mean alloys? i keep meaning to get a picture up of the car but i forget everytime i go out!

I've also purchased a debadged grile, will stick the springs on and see what there like, they only cost £50 and wil be cheap to fit as i have a friend to do them, so will just see how it goes, maybe ill go to coilovers and get a set of alloys but does that mean ill need new tyres too?

we took the polo logo of the back yesterday, looks surprisingly nice without it - i bought a plain chrome "polo" logo off ebay, will put that on for now as i think it looks quite nice... but to people on here it might look revolting!

getting the car chipped this weekend hopefully by a chap in the tuning forums, hoping that with this and an air filter it'll increae performance slightly. its one of them Fahrvergnugen Tuning ones.

any idea if il notice the performance difference after new air filter + new chip? tempted to get a new exhaust aswell as I've heard they can put a bit more power in. id be happy with 120bhp!

thanks

ask polophil hes got a green 1.4 16v bot a chip and a bmc induction kit and hes running 115 bhp and standard is 100 so it should make a bit of a difference

I'd definately recommend one of Alan's (Fahverngungnenenenngnen) chips.

Any other mods would compliment the chip... straight through exhaust... 4 branch manifold... filter... Would be getting close to 120 by then... obviously there's loads of other things that will increase the power.

Alan's chip gets the thumbs up from me... purely because it seems to smooth everything out and makes it more responsive

Phil

dude - your still running before you can walk! in my opinion.

your saying you dont want to increase your performance but then your buying a chip for it already. your beginning a very slippery slope, where your throwing money at a car for no reason.

lexus lights are not going to buy you credibility on here, neither are K&N's & springs as 90% realise that the improvement of the car set against the cost just doesnt work.

it worrys me that you dont know that wheels are commonly known as rims or shoes and that there are different sizes and one tyre does not fit all.

at the end of the day its your car and money but youve asked for advice and were just trying to save you making our mistakes

rims... :lol:

  • Author

thanks for the advice, i realise I'm throwing money at it but i feel this is the only way ill really learn is by trying different things. Money isn't the problem, this is just a fun day car, good on juice, where i want to try and learn as much as i can. I'm not after a performance showcar (I'm currently ebay bidding on a few different big engine cars after a topic i made in the general section) i just want smoething that looks a little better than standard and see what i can get out of it with a bit of modding. this is all new to me and i've never really been into cars until recently where a friend of mine has just gone through 8 cars in as many weeks, ranging from bmw m5's to audi tt's to his current golf vr6 with a supercharger, it really did inspire me to have a go myself. I will just reiterate though that money is by no way a problem, I'm just doing it to burn a bit of time and learn a few things on the way.

the chipping part i noticed from browsing through the forums here and i noticed the chap in Newbury doing them for quite cheap, i had planned to go Saturday to get one done but other things came up and i wont be going for a month or so now :(

also : big lol @ the tyres comment - i bet i am coming across as a complete tool!

Edited by walter22

the chipping part i noticed from browsing through the forums here and i noticed the chap in Newbury doing them for quite cheap, i had planned to go Saturday to get one done but other things came up and i wont be going for a month or so now :(

That is Alan aka Poloace who with his fahvernugnenenenen chips :)

  • Author

yeah I've contacted alan, i just have a question with alan about the chip, i wonder if you can help - if i get the chip done ebfore the exhaust and air filter will i have to have it rechipped again? or is it a case of once its done, its done and any other mods will just increase performance?

yeah I've contacted alan, i just have a question with alan about the chip, i wonder if you can help - if i get the chip done ebfore the exhaust and air filter will i have to have it rechipped again? or is it a case of once its done, its done and any other mods will just increase performance?

Once it's done you're sorted and any additional mods will just compliment it :)

  • Author
yeah I've contacted alan, i just have a question with alan about the chip, i wonder if you can help - if i get the chip done ebfore the exhaust and air filter will i have to have it rechipped again? or is it a case of once its done, its done and any other mods will just increase performance?

Once it's done you're sorted and any additional mods will just compliment it :)

excellent, so I'm getting the chip and the air filter this week, exhaust next week, anything else i could do? getting an obsession with this now!

a set of ta technix coilovers set my mate back £186 from ebay delivered from hot tuning

the car looks the shit and its only on standard steelies but its lowered 110 mm if that helps you understand why 40mm just isn't enough you need to make the car as low as a badgers nadgers!

(if it aint rubbin it aint dubbin!)

a set of nice wheels with some dish will set the car off really nicely

or another nice option is for some old porsche wheels called teledials these usually look nice but you will need to get a good tyre size on them and some adaptors so maybe a bit of an expensive option but you can shop around and sometimes find a bargain! Just type in google to have a look or look around on the forum

and its all about smoothing the body work the black rub strips down the side of the doors peel off but leave a black glue this comes off with some picking and scraping and tar&glue remover or white spirit which is what my mate used, get rid of all the badges you can as this looks nice and smooth

look for 6n2 rear lights (the all red ones)

a set of pressed plates will also set the car off nice and i quite like the look of a good sticker collection in the corner of the rear window

not too up on interiors myself but you can always get quite a bit of help on here with most things.

hope i've been of help haha!

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.