here's how i did it I'm board so i did a step by step

light in oven gas mark 7 for 10min's

then slowly prise the glass off (very carefull shit )

once off, mask the middle out with masking tape, and sand the areas you want to spray

that spray with high heat matt black (or what ever colour you want)

then let to dry.

when dry de-mask it and stick the glass back on, i used silicone sealer.

then leave foe the silicone to dry, i had my dinner then

i also did my indicators, by spraying bit by bit into the midle where to bulb goes untill i was happy.

then slat them all back in

If any one try's this using this info, I'm not held responsible for any thing thats not right

Kam Says: Fixed the images

blends in really well with the front end- nice

looks cool

rolo 1 question though why is your nember plate to the side?

IMO it would look much better in the middle

^^^^I'm in the process of turboing it so i want as much cooling as posible, will cut the recess out and black mesh it.

Lights suit it to the ground mate. Good job

^^^^I'm in the process of turboing it so i want as much cooling as posible, will cut the recess out and black mesh it.

ahh that explains it :)

dr pepper, what is the that can happen

lovin the lights too mate

Copycat!

Yes andy, and who copied me?

Nicely done rolo.

^^^^ ^^^^

Looks nice and subtle that - and best of all they're RHD and didn't cost 80 quid!!

Don't think I'll bother doing it on mine tho.

i dont care who its copying...I'd like to do it to mine, to fit the all-black stealth look. they look good mate.good work!

That looks really cool!!

I've considered doing this. I might have a go with some lights from the scrappy. Nice one!

Also worth cleaning the inside and outside of glass thouroughly when it's off!

Yes andy, and who copied me?

Nicely done rolo.

Pah, didnt even know you had em, and you bought em like that!

you dont eat enough i try to eat a whole loaf

then you can soak all of the soup up

might tint my orange side repeaters on my mk3, is removing the lense from the holder the same process in the oven?

nononononono, dont do that there plastic. i just sprayed through the hole at the back

you just dont stop do you!! haha

that looks like valuable time wasted that could be put to wwhhhhhooooossshhhh tissssh pop bang!!

looks good mate. hows the turbo conversion going then?? take it its pretty hard work

does it affect the intensity of your lights? are they still as bright?

oh and can it be done to the rear lights?

that looks cool! good work, can tell you wa bored!

I think thats ace, what a way to transform the front end of a mk3, good on you rolo.

sweet rolo

I'm gonna do that next week

thats exactly the lunch me and james had when we fitted central locking to his car!

MMMMM MEDITTERANEAN TOMATO!!!

Good work Rolo