Skip to content

Project Red

Featured Replies

Where did you get your flush petrol cap from and have you got a popper installed to open it??

cheers

  • Replies 437
  • Views 75.7k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • very nice car.just needs a set of rims. i want a red one so badly now but looks like I'm going to end up with a black gti. if you dont midn em asking how much did you pay for the re-trim.pm me if you

  • Cheers dude! Got some more plans for the interior to hopefully make it that bit more special, but need to save some pennies first I found this pic of my car from VWNW that I liked so I thought I'd

had a poke around this at edition...what you hit with the bumper to make the dent on the passenger side :lol:

joys of being low?

  • 3 weeks later...
  • Author
Car looks great! Like everyone else says it gives you inspiration to make your Polo look as good as yours.

What other plans you got?

Thanks mate :)

I've got plans to change pretty much everything but whether it'll happen or not we'll see :lol:

Where did you get your flush petrol cap from and have you got a popper installed to open it??

cheers

The petrol cap was smoothed at the bodyshop and no there's no popper

had a poke around this at edition...what you hit with the bumper to make the dent on the passenger side :lol:

joys of being low?

I don't know tbh, it's been there for a while and I don't think I did it :doubt: But we can pretend it's because I'm low :lol:

The car's off the road now anyway, so we'll see what happens from here...

1.8t :)

anything else isnt worth considering :lol:

  • Author

The Polo's finally off the road! :) I gave it a last wash today before it gets taken apart and thought I'd share a few pictures of it with my daily Lupo, just cause :p

IMG_0399-Copy.jpg

IMG_0401.jpg

IMG_0397.jpg

And home for the next few months..

IMG_0406.jpg

So far I've only taken the boot build out and stripped the rear to start planning my new build ;) It's payday on Tuesday so there should be some proper updates coming after then :)

To be continued...

Looks great bud, nice and clean too

  • Author
Looks great bud, nice and clean too

Thanks :)

Day 1 - the stripping begins...

IMG_0409.jpg

IMG_0410-1.jpg

Whats going on!? How come your breaking it down?

How did you get the rear lights like that (without the Foglight)?

Tardelli

car looks great keep up the good work

  • Author
Whats going on!? How come your breaking it down?

I'm just making a few changes ;)

How did you get the rear lights like that (without the Foglight)?

Tardelli

If you mean the reverse light (?) then it's just a LHD light :)

car looks great keep up the good work

Thanks dude :D

quote name='tardelli' post='2189558' date='Monday 24th October 2011 - 11:31am']How did you get the rear lights like that (without the Foglight)?

Tardelli

If you mean the reverse light (?) then it's just a LHD light :)

Do you happen tonknow the Part Number m8?

Great car by the way

Tardelli

  • 3 weeks later...
  • Author
Do you happen tonknow the Part Number m8?

I don't have it at the minute but I can have a look if I remember!

I've been pretty lazy the past couple of weeks so I thought I'd get my arse down the unit today and actually get something done on the Polo. Didn't do a great deal to be honest, but until I get some stuff bought there's not much I can do apart from strip it!

The front end's off properly now anyway

IMG_0419.jpg

And I thought my engine bay was clean :roll: haha

IMG_0420.jpg

The coolant bottle, washer bottle and battery are all out too

IMG_0423.jpg

I need to buy myself an engine crane and then the engine can come out and I can start work on the engine bay properly. Going to buy a few things tonight too so I can actually get on with some proper work :lol:

  • 3 weeks later...

i know this a question about an old topic, i also searched through this thread and i don't think anyone has asked yet

but...

where did you get your number plates done/from? :)

also

i'm renowned among my friends and family to have the cleanest car in town...

but i want to go one step further!

is there anything you can recommend to make my car look like a mirror i.e. being stupidly clean!

*FYI, everything i use on my car at the moment, shampoo, polish, spray etc are all Auto Glym products*

thx!

  • 2 weeks later...

just read through the whole thread and i must say, WOW! just about to get my polo and get on with some work on it. Looks mint :)

  • Author
i know this a question about an old topic, i also searched through this thread and i don't think anyone has asked yet

but...

where did you get your number plates done/from? :)

also

i'm renowned among my friends and family to have the cleanest car in town...

but i want to go one step further!

is there anything you can recommend to make my car look like a mirror i.e. being stupidly clean!

*FYI, everything i use on my car at the moment, shampoo, polish, spray etc are all Auto Glym products*

thx!

The german pressed plates were just off a shop on ebay and the red one is a pressed plate that I painted myself.

I use quite a few different products on my car, the main ones though are Zaino (shampoo and quick detailer), Poorboys polishes, Chemical Guys Jetseal, Dodo Juice Supernatural wax. And it's machine polished too. I'd recommend getting yourself on detailing world too, you'll be able to get lots of advice on there :)

just read through the whole thread and i must say, WOW! just about to get my polo and get on with some work on it. Looks mint :)

Thanks dude 8-)

  • Author

IMG_0478.jpg

:ninja:

New engine came yesterday. It's an AUQ, 180bhp but it won't be staying that way for long :p I'm planning on getting a K04 set up, BAM inlet and a few other bits and bobs.

I know I'll probably get a lot of hate for the choice of engine, but at the end of the day we're gonna be doing the work ourselves and having never done an engine conversion before, I'd rather do something that I know I can get help with if (when!) I get stuck :lol:

Let the fun begin...

God I LOVE this car and it's a bout 2 get a whole lot better

  • Author
God I LOVE this car and it's a bout 2 get a whole lot better

Thanks mate ;)

Will we see any dirty hand pics from this conversion ?

  • Author
Will we see any dirty hand pics from this conversion ?

Yes definitely ;)

I've got 10 days off work coming up over Christmas so I'm hoping to get some work done on the car for once :lol: but just to keep the thread alive with some pictures...

I got an Ibiza Cupra engine cover cheap on ebay a few weeks ago and I was thinking about getting it tarted up and being a bit different, but I think I might have been a bit optimistic in thinking it'll ever fit :lol: It was only 99p though

IMG_0491.jpg

And my Forge diverter valve

IMG_0493.jpg

I need to get the new engine down to the unit and then I can start stripping it and getting the bits ordered that I need :)

Haha you legend!

I'm looking forward to seeing the progress of this :)

Yes Yes Yes Yes!!!!

  • Author
Haha you legend!

I'm looking forward to seeing the progress of this :)

Haha 8-)

Thanks mate, I'll be keeping the thread updated with my progress!

Yes Yes Yes Yes!!!!

:D

I've just spent the past 45 mins reading this thread. Gorgeous car, I seen it at the VW Festival and it looks even better in the flesh!

8-)

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.