got bored so i thought i might do some slamming on my model bus lol

copycat, i done that to mine. althought I'm taking the bottom off and getting it on the deck properly.lol

copycat, i done that to mine. althought I'm taking the bottom off and getting it on the deck properly.lol

lol good minds think alike lol, how do you mean your taking the bottom off i had to trim some of the interior bits off were the wheels sit just to get it that low lol

with the bottom on you can only go so low cause the bit between the wheels rests on the floor.lol

so I'm taking the bottom off, using a soldering iron to melt the bumpers on.

and melting the interior bits up.

ill get pics up tomorrow once I've done it.

heres what its like at the moment.

air ride anyone?

also ned to cut rear axel down about 2mm as the wheel hubs hit the edge.

also ned to cut rear axel down about 2mm as the wheel hubs hit the edge.

I'm just looking at mine now and maybe if i take it all apart get a small hammer hit the inside arches and then chop some more out of the interior plastic were the wheels sit i can make it sit on floor hmm does that sound decent

tip it upside dwn dude and u will see the bits between the wheels will be on the floor when u put it down,

thats why I'm taking the bottom off.

I'm going to try something i will let you know if it works lol

sand the interior plastc just above the wheels and you wil be able to get it lower and just pul the arches out and then if you got a dremel sanding tool just flatten all the bottom off and wont hit the floor I've just done mine lol

slammed a tad more dont think i will go anymore lol

Edited 27 January, 201016 yr by gav170489

lol.. I've just done the same kinda thing to a beetle model. dropped it n cut some plastic out n narrow front beamed it.

david.

lol.. I've just done the same kinda thing to a beetle model. dropped it n cut some plastic out n narrow front beamed it.

david.

get a pic of it up so can have look

mint I've dun this aswell weird how people into dubs like models and moding them haha love it !

hmmm well seen as tho you showin off campers heres my bad boy on some rather sexy wires i got off a plymouth baracuda

hmmm well seen as tho you showin off campers heres my bad boy on some rather sexy wires i got off a plymouth baracuda

man thats a sweet bus love the rims did they just pull straight off?

ye i was changing the wheels on the plymouth as well so i thought hmm what can i use these 4 then i sin the bus so i thought yummy lol

from this,

to this,

:)

Edited 28 January, 201016 yr by jake-npj

i half expected u to stray it black jake enough camber? lol

its all about the camber! just need to work out how to do the fronts now

man i love the camber how did you manage to do that

basically just two zip ties pulling on eachother round the axels if you get me :) bodged but looks cool and every thing still works the same!

model thread ftw!

i'm in the process of modding my 350z model, know it aint vag but got bored of waiting for winter to be over to mod my polo so got started on my favourite model :p

MOAR MODEL MODS!

just finished mine dude,

i can offically say its scraping low.lol

added a wee bit of camber aswell.

what you think?

I've got a maisto model camper (same as the one with the wires on) in front of me, this thread has inspired me lol, will take up some time when I'm bored in the evenings.

sadddddd