Skip to content

Shifty Toothed Pulleys?

Featured Replies

Hello

I'm not being funny but someone is selling "psd toothed pulley sets" on here, and i can tell you now these are not psd pulleys.

Some people need to get a fuckin job.

Care to explain yourself Juan?

P1090126.jpg

  • Replies 36
  • Views 3.5k
  • Created
  • Last Reply

Top Posters In This Topic

Looks like one. Surely they should be listed as PSD 'copies' ?

they are not psd ones i can tell you that much, they are very well made copies, and someone trying to cash in on saying something is rare, and assume people will pay more cash for them thinking thet were psd

£235 for copies and you have to have find someone to make a piece up for them...a bit cheeky imo.

Mine hasnt got PSD stamped/engraved on them iirc and mine are legit

My mate has a set of the later ones and they do have PSD on them...exactly like those.

is it stamped on the inner or outer edge? My outer edge of the charger pulleys plain.

yours will be a custom eaton one jon

looks idential to the one i have and bought from PSD about 3 years ago.

there are two versions :nod: . early and late (late being pictured above).

early ones have the belt guides on 2 of the pullies (Silver pulley with gold guides no PSD etching) late ones only have a guide on the alternator one.

the later ones are anodised in black and are etched with PSD and the alternator one has silver/chrome guides.

so either someones dug abig hole and just jumped in it up to their neck and owe an appology or mean they are non legit copies of the later version.

Edited by genesisGT

no not at all, and your facts above are close, but not correct, simple answer from "Juan" where he bought all 3 sets from and proof of this

i bet it does not come.

Juan always tend to buy and sell very expensive gear and stockpiles NOS goodies for his projects, but I've only seen his name on the forums for the last 18 months or so, and only recently I have seen several threads from Jaymac on the Mk1 owners club regarding Juan failing to reply to pm's and phonecalls regarding a set of FK Coilovers he was advertising but never got round to taking any pictures of.

I am very wary and have told a few of my friends who have considered buying items off him to forget it, especially when he only asks sub 25 quid less than the Brand new retail price of the goods.

I believe Juan has had these made up himself as there was a thread mentioning the machining of enlarged throttle bodies, something which I believe you yourselves used to do.

It's all well and good using someone elses design (with permission) but to create copies of an established item and to continue using the trading name isnt.

I'm sure mr taxman would be rather interested too, as he seems to be a private trader and not a business

ok! :-)

I had a set of the early ones when i bought my engine from Paul B and i got a set of the later ones when i gave them back to him and the bits mentioned were the only differences i noticed as well as the charger one being much wider. Got some pics somewhere of both sets.

presumed you were jumping the gun, :oops: but anyone making copies and trying to pam them off as genuine ones is a different matter.

why would the guy go threw all the effort to creat copies of psd pullys when he could of just made the pullys with out saying there psd toothies? just because psd is printed on the side or that they are made by psd there not going to make any more money than if they were blank.

well yeah they will as people will think they are psd pulleys, as grunge says above, they will play off the success of the original items.

will await a reply on this thread before it gets locked.

success of the original items was due to no other company offering quilty lightweight toothies at the time and till this day.

Hes put a load of pretty expensive gear up for sale on polo3. Just spotted it

These toothed pulleys, a stage 3 subframe and a 4 branch.

i put £10 on that in the near future he is selling subframes and 4branch's...

theres no way he'll be making money on the subframes, pipe bender with the dies alone will cost him alot more than what that frame is selling for, not to mention the powdercoating. IMO you are jumping to conclusions pretty quickly.

legitimacy of the pulleys however i cannot comment on...

theres no way he'll be making money on the subframes, pipe bender with the dies alone will cost him alot more than what that frame is selling for, not to mention the powdercoating. IMO you are jumping to conclusions pretty quickly.

legitimacy of the pulleys however i cannot comment on...

I'm not saying to make one frame, i mean to copy it and make multiples

its only an educated guess anyway, i hope i am wrong

theres no way he'll be making money on the subframes, pipe bender with the dies alone will cost him alot more than what that frame is selling for, not to mention the powdercoating. IMO you are jumping to conclusions pretty quickly.

legitimacy of the pulleys however i cannot comment on...

Finally some sense!

How many people that have commented have actually handled the pulleys? or seen them in the flesh?

In regards to proving where I got them, I'm being told by people on a forum "that I must prove from whom and from where I got them".

Seriously what am I meant to do??, obviously I can't put some else's contact details up! and if it were to just put their name and email up without telephone number then who's to say it's not just false! And even If I were to submit information then who's the judge of that info?

And if "steve74" is steve pitt then I don't know what to think about his appearance on the forum, as in recollection quite a few very bad things have been said about him, con man, thief and much worse

People are welcome to make whatever assumptions they want but I'm not going to get drawn into being questioned and flamed by a people on a forum who I don't even know personally.

He has made 'copies' of the GED braces as well but never advertised them as GED braces.

i put £10 on that in the near future he is selling subframes and 4branch's...

Whoever sells subframe kits would need have to some pretty hefty liability insurance or atleast they would do if they were wise!

That would have to be backed up with evidence to show you'd tested the product otherwise you might aswell not bother getting the insurance!

And in regards to 4 branches, somehow I don't think i'll be sinking aload of ££££ into a jig and then a load of £££ per 4branch.

He has made 'copies' of the GED braces as well but never advertised them as GED braces.

The GED bars as they are known are just a bit of steel tube with two pieces of angle offset at a certain angle.

There's even someone on the forums who has previously sold many "GED" brace bars and they are curently producing and running group buy of these.

lol way to not answer the original question

LOL yes they're original unfortunately

Apart from the fact that the centre bores had to be bored out ever so slightly as the anodising had built up an by an unnaceptable amount.

Edited by Juan

Guest
This topic is now closed to further replies.

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.