Skip to content

finally!

Featured Replies

got a bit of time so thought i'd write this up.

Probably nothing special to anyone other than myself but hey i enjoyed it (most of) and i'm sure u all do!

I bought a K reg polo 1.3 mk2f from a friend 4 yrs ago on the sole basis that she looked gorgeous! i obviously looked her over (being an engineer) checked water (none!), oil (very over filled!) and came to the quick assumption that the head gasket was gone! but i still bought her as u do! I was on a ban at the time so had a few pennies (only a few) and lots of time on my hands!

Quickly i dropped the old and filled with new oil, wopped some water in and fired her up, ran like a dream! then noticed a leak from the rad, thought ok then purchaces a new at a good price, put it in, changed some of those horrible clips for some good old jubilee clips, fired her up again, i let her tick over, warmed her up, then the cooling fan cut in, and i honestly thought i was on to a winner, BUT then noticed the more (way more) than average steam coming from the exhaust!! i pulled the header tank top off slowly after she cooled down and fired her up again only to see my horror of the pressure in the water system!!

Now i'm an ag (agricultural) engineer, although a city boi, have only been doin it for the past 5 yrs, always been a petrol head but never got the chance to get into it, taken things apart n never knew what i was doin. till i got the ag job, but its all bloody diesel!! Now give me a tractor, combine,bailer etc etc and with the training I've got i'm confident!

i get the odd chance with customers cars, mowers chainsaws etc etc and i'm stubborn and very persistant so put the job on hold and did some research!!

Holly Sh*£ there is a GT one of these that kicks ass!!

Fully hyped up i get back into her, new wheels (bmw 3 series) and new tyres (thanks tim) take the cylinder head off, and strip, skimmed, new gasket set, got a good mate to help, and we go at her like shes god!! only prob is somethin went wrong with the assembly and when all assembled timed?????????? it got screwed and bent all the valves i spent ages lapping in!!!

But it must have been, i looked on the trusty E-bay only to find a breadvan with the same engine code damaged in the snow going for 25 quid!!!

I snapped her up brought her home on a trailor and stripped the whole shebang in my carpark, took all the good bits off (starter motor, alternator, ecu etc etc.) Swopped the engines connected the drive shafts electrics gear link age and exhaust etc etc and she fired up after some fuel got in! WELL CHUFFED! everything was going good, got my tunes installed and was happy, till 1 day i drove her down the car park and applied the handbrake and it decided to snap!

I put my engineer head on now! 3 years with a good boss and alot of common sense, i jacked her up on axle stands all round and done a bit of an appraisal, so to speak!!

New suspension, Brakes, (handbrake), lines, pads and disks, these were obvious from the start to me, i'm a great believer in sorting out the running gear before tuning so this is a must do! then the letter came through about untaxed cars in the carpark!!!!!!! Cant anyone better themselfs without trouble?

So i got permission from the boss and it got taken? (drove) ha ha down the workshop, only half a mile! and there she sat for some time, the odd start n run round the local farm where i work just to keep the stuff lubed?

Money!! I got a small fund from family, (lost) and i knew that they would want me to use it to my advantage and to make me happy! So i invested in suspension, yeah its not the best but its better than i had, new disks, pads, pipes! (good fun) steering wheel from my other half

So on went the suspension, a bit of a mission but thanks to the forum i managed it along with my good friend the beer crate, i had to keep takin the car in and out because of jobs but to cut it a bit short i got the brakes on and realised i've lost a part from the handbrake, its called the intermediate part (still missing it) but i fabricated a part, (might work) if u have one pls i will pay ha ha ha!!!!

Now exhaust!! being a 1.3 i didnt want to put a big exhaust on it because of back pressure and loosing bhp so it wasn't a big argument till i drove into the workshop 1 day and ripped it from the bendy part from the front! yeah i wanted a stainless but they are so expensive, i had a scorpion mid box(strait through) and the rest of it so with my techy bit and some skill, made my own!! bled my brakes, my handbrake intermitent part needs some attention but is very close!!!!

So to some it up, after a long slog, think with some good hard work i'm there all i have to do is MOT it ha ha ha ha ha thats the true test, i'll let u know how my tests and licence go. oh yer have some pic s soon.

If u have read it all thanks, hope u enjoy yours or are getting to grips with it.

Cheers

  • Replies 4
  • Views 837
  • Created
  • Last Reply

Top Posters In This Topic

Nice story! Good to hear someone who knows what their talking about! :-)

Where are the pics though? :-(

good things come to those that wait.

Good luck with your tests.

Happy Sunday

nice story dude :)

Hope it flys through the MOT!

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.