Skip to content

How do YOU tackle speedbumps

Featured Replies

As the question says really

  • Replies 140
  • Views 11.5k
  • Created
  • Last Reply

Top Posters In This Topic

Like everything else in life.... HEAD ON!

Dependant on size i either ...

* Turn Around

* Attempt to drive over at a angle as this always helps

* 1 Wheel on 1 wheel off although that bottoms the sill out .

* Bothe wheels on i have exhaust issues ..

Its all fun and games tbh

  • Author
Like everything else in life.... HEAD ON!

LOOOOL

i don't..unless it the loong kinda ones, going sideways dosn't work for me

I have always found that the faster you go the less it scrapes. Never worked out why, requires some brown stains at first tho.

i remember doing 50+mph over some in my mates old 306 rallye... it was like they werent even there and as if the suspension was actually doing its job :o

worst noise I've ever heard was when i went over one of the square ones head on. Mental Scars tbh

i hate the little metal flaps on some car parks that are meant to stop you driving in the wrong way, but only the ones of your tyres go down, meanin the 4 under the car smash whatever they can.

i drive thru the middle of the three square ones, but all others i go about 2 miles an hour over because my castle nut needs tightening and the clunk annoys me

Where i live is in the middle of a speedbump barrier :-(

In my jetta i can take them head on, about 5-10mph, because of the balloons i have for tyres, still scrapes a bit though

I'll soon have to take them like i did in my golf (100+mm down on 13s) and my old polo (about 90/100mm on 14s) - at an angle at like 2/3mph :oops::lol:

Like everything else in life.... HEAD ON!

Exactly what i do...my philosophy is that if you hit it fast, then your less likely to crack your sump on the bump as your over it too quickly....yes youl fuck your shock up quicker, but id rather that than my sump.

i generally drive over them

Speed is the key

Speed is the key

Really?

Turn arond and take a de-tour.

I tend to go straight over them at about 5mph, my car aint that low so I wouldent get beached on the hump. There are way to may speedhumps in the uk thats the reason why I dont want it on colliovers because It would take alot longer to get to places but I do really want it lower, speed humps have got to be the worst idea anyone has ever had.

Straight over if I can, if not then go at an angle.

In the land rover though, it's more "what speed bump?" :smirk:

I just go as slow as possible and my suspension is still falling apart!

They are just the worst idea....EVER! Instead of fixing the damaging potholes they make pothumps to fuck your car a bit more!

haha sleeping policeman

i just pick another route

or take them on sideways lol

What type of scraping are you guys talking?

I see 6n drivers in here who haven't passed any notice to my chassis notch thread?

As for me, speedbumps I just go slow. Whatever scrapes, scrapes to be fair...I'll try my best to not make it by going at angles or in the middle but why pussy foot around?

You lower your car, expect scrapes and stop being gay about it. I've obliterated 2 sumps already and now have JB Weld on my 3rd. Toughen up.

do a jump !

What type of scraping are you guys talking?

I see 6n drivers in here who haven't passed any notice to my chassis notch thread?

As for me, speedbumps I just go slow. Whatever scrapes, scrapes to be fair...I'll try my best to not make it by going at angles or in the middle but why pussy foot around?

You lower your car, expect scrapes and stop being gay about it. I've obliterated 2 sumps already and now have JB Weld on my 3rd. Toughen up.

Wow what a hard man. Watch out.

There is such a thing as being careful, not being 'gay' about it.

Encountered a massive speedbump in Hastings yesterday. Had some fun exhaust noises going over that!

What type of scraping are you guys talking?

I see 6n drivers in here who haven't passed any notice to my chassis notch thread?

As for me, speedbumps I just go slow. Whatever scrapes, scrapes to be fair...I'll try my best to not make it by going at angles or in the middle but why pussy foot around?

You lower your car, expect scrapes and stop being gay about it. I've obliterated 2 sumps already and now have JB Weld on my 3rd. Toughen up.

Wow what a hard man. Watch out.

There is such a thing as being careful, not being 'gay' about it.

Encountered a massive speedbump in Hastings yesterday. Had some fun exhaust noises going over that!

i agree, nothing gay about going slow over bumps and being careful,

you're on your third sump, most are probably on their first, due to being careful...

I went to gordano services last week and my exhaust nearly got stuck on the speed bump in there its a shocker

What type of scraping are you guys talking?

I see 6n drivers in here who haven't passed any notice to my chassis notch thread?

As for me, speedbumps I just go slow. Whatever scrapes, scrapes to be fair...I'll try my best to not make it by going at angles or in the middle but why pussy foot around?

You lower your car, expect scrapes and stop being gay about it. I've obliterated 2 sumps already and now have JB Weld on my 3rd. Toughen up.

Wow what a hard man. Watch out.

There is such a thing as being careful, not being 'gay' about it.

Encountered a massive speedbump in Hastings yesterday. Had some fun exhaust noises going over that!

i agree, nothing gay about going slow over bumps and being careful,

you're on your third sump, most are probably on their first, due to being careful...

Well done you DubDanny, you can break stuff. I am utterly in awe of you and all your broken sumps.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.