Skip to content

Standard 6N 16v on the dyno.

Featured Replies

Right got my valver on the rolers at Torque of the Devil in uxbridge this morning and it made 103.0BHP ATF and 92bhp on the rollers. So thats plus 3bhp and minus 2lb/ft on the standard figure.

I'm really impressed with that, for a car thats over 10 years old with 86k on the clock and no mods to make better than standard power is really good. All thats been done is a service and v-power.

With a bit of luck I'm going to be getting it chipped this afternoon or tomorrow morning which should fix the flat spots and add a couple of bhp, also gonna try and do a de-back box mod tomorrow if its dry.

Let me know what you think.

Dyno01-05-10.jpg

Dyno01-05-10103bhp.jpg

Edited by Dum-Dum

  • Replies 14
  • Views 2k
  • Created
  • Last Reply

Top Posters In This Topic

sweet how much did that cost, I'm thinking of getting mine done after a servies and uxbridge aint far from me at all.

not bad! :)

would be nice to see the results of the chipping

Never seen a car on a dyno with the wheels spinning and nobody driving it lol

  • Author
sweet how much did that cost, I'm thinking of getting mine done after a servies and uxbridge aint far from me at all.
Its £50 for a power 'run' which is usually 3-4 runs but sometimes 5,6 or 7 runs to make sure they get the best power out of it. all cars seem to settle into the dyno so it gats a fair chance to make its power. mine made 101.8 first run, 102.x second run, 102.9 third run and 103 on the final

not bad! :)

would be nice to see the results of the chipping

Its been chipped now and so is going back on the rollers wednesday morning, alan (poloace) gave me a discount of half the dyno cost off the chip so i could stick it on the rollers and see the difference.

Never seen a car on a dyno with the wheels spinning and nobody driving it lol
Its cos the car is idling but still in gear

cool thanks £50 is a bargin

wtf! mines 115bhp at the flywheel and 85bhp at the wheels!!! :shock::shock:

fair play tho pal nice valver there!

  • Author
cool thanks £50 is a bargin
If your interested in comming along I'm going wednesday at 9am. I think theyve still got slots tuesday and wednesday morning.

wtf! mines 115bhp at the flywheel and 85bhp at the wheels!!! :shock::shock:

fair play tho pal nice valver there!

Lol mine is standard though, not for long though, gonna start playing properly next weekend.

Edited by Dum-Dum

  • Author

I'm back on the dyno again in a hour this time with a chip from poloace, anyone got any guesses on what itll make??

id say 115 on rollers!

15bhp from a chip i would be very supprised

108hp I reckon

dam i have only just read this thread again, i have a day of work today and would have been up for it, let me know if you go again.

I'm very intrested how much hp the chip will add, I'm cosedering getting mine chiped when i got some spare cash.

  • Author

It made 4bhp and 3lb/ft LESS I'm waiting for some more info off the dyno and to speak to alan as i think it might be my car thats broken rather than the chip.

My car with a standard ecu and exhaust (although it had a hole in the back box) and a Pipercross induction kit made 110bhp on a dyno-dynamics dyno on it's second run. It'd had an oil change and new sparks/ht leads the day before so it was all tickety-boo!

  • 2 weeks later...

mine has a cda chip remap and cat back exhaust I'm sure thats all its got and a print out of 115bhp (85bhp at the wheels) i think if i put the standard airbox back on it might be quicker

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.