No worries mate, ill travel anywhere for a brew lol

Iv got shot loads of brand new fuel pipe I could bring up,

Next Saturday?

What size tyres you after for the wellers?

I Know of a group buy going on Yoko A539's atm

Works out about £40 cheaper than buying them even from camskill which is still cheaper than most.

Ah cool, ill take a look in a bit, i only need 2 though :)

No worries mate, ill travel anywhere for a brew lol

Iv got shot loads of brand new fuel pipe I could bring up,

Next Saturday?

Haha, good times, i might be off then, ill have to check :) and that would be awesome as i need to ditch the pump and run some lines all the way up, ill sort you out for it :) I'm getting close now, and I'm getting excited, I'm getting bored of running round in the pinkish bready :(

What size tyres you after for the wellers?

I Know of a group buy going on Yoko A539's atm

Works out about £40 cheaper than buying them even from camskill which is still cheaper than most.

Ah cool, ill take a look in a bit, i only need 2 though :)

No worries mate, ill travel anywhere for a brew lol

Iv got shot loads of brand new fuel pipe I could bring up,

Next Saturday?

Haha, good times, i might be off then, ill have to check :) and that would be awesome as i need to ditch the pump and run some lines all the way up, ill sort you out for it :) I'm getting close now, and I'm getting excited, I'm getting bored of running round in the pinkish bready :(

I'm looking forward to running around in the pinkish bready once yours is done! ahaha

What size tyres you after for the wellers?

I Know of a group buy going on Yoko A539's atm

Works out about £40 cheaper than buying them even from camskill which is still cheaper than most.

Ah cool, ill take a look in a bit, i only need 2 though :)

No worries mate, ill travel anywhere for a brew lol

Iv got shot loads of brand new fuel pipe I could bring up,

Next Saturday?

Haha, good times, i might be off then, ill have to check :) and that would be awesome as i need to ditch the pump and run some lines all the way up, ill sort you out for it :) I'm getting close now, and I'm getting excited, I'm getting bored of running round in the pinkish bready :(

I'm looking forward to running around in the pinkish bready once yours is done! ahaha

gonna get it washed today dude so might not be so pink! might even polish it when i get home! Probably wont though

Got it washed, still a bit pink :p

165/50s on the wellers

Can you even get them?

Well, decent ones?

salty just sell me the bready, fuck dave haha

165/50s on the wellers

Haha, I'm low enough as it is! never mind going lower profile

salty just sell me the bready, fuck dave haha

Hes already give me the money dude, sorry :(

Little update as well

Fitted bens new wheels to his car. stttaaanceee, only they rub so we're gonna have to roll the arches

Then pikey jacked up my car so i could fit the subframe and arb blocks. only my mate sheared a bolt into the nearside mount, then snapped the bolt off, so today I've had to take the whole thing back off, get a pair of mole grips and get it out. Only the fucking thing is threaded and now i dunno what to do, i can either find a die and try and sort the thread, or angle grind the plate off then smash the bolt off and weld a new one in. So all-in-all not a good couple of days and after 2 days of work, I'm now pretty much back where i started :/

The fucked panel was the one that the taxi driver ran into, then i took out my frustration on it

:(

Take a picture of this bolt, iv got no idea which one you mean..

Beast, angle grinder frustration?

Take a picture of this bolt, iv got no idea which one you mean..

Ill do it tomorrow as I've only just read this and I'm now at work!

Beast, angle grinder frustration?

Claw hammer; got oldboy on its ass

Take a picture of this bolt, iv got no idea which one you mean..

Ill do it tomorrow as I've only just read this and I'm now at work!

Beast, angle grinder frustration?

Claw hammer; got oldboy on its ass

Haha. Ill try get on those wings for you next week man. I'm gonna go down the unit at about 2 and begin to degrease my afh.

Haha. Ill try get on those wings for you next week man. I'm gonna go down the unit at about 2 and begin to degrease my afh.

I'm in no hurry just yet dude! its gonna be a while i think till I'm at the bodywork stage :/ I've got some of next week off and I'm off next saturday as well if you fancy a day on the cars :)

yeah man I'm up for it. we still on for lowering on sunday? I've borrowed some spring compressors ready

yeah man I'm up for it. we still on for lowering on sunday? I've borrowed some spring compressors ready

Dont think I'm gonna be able to make it dude

this need updates, this weekend were raping this car big time, engine in... shall we?

also can we chop my fucking exhaust off its catching on cambered roads/grids/slight inclines

this need updates, this weekend were raping this car big time, engine in... shall we?

also can we chop my fucking exhaust off its catching on cambered roads/grids/slight inclines

Max says he's gonna rape you, said he's feeling rapey :p

Gonna try to get to that point yea :)

And yes, we can get it all sorted dude!

I'm getting fed up of looking at my car all sad propped up on bricks and with them shit wheels on :(

Lol shut up Alex. You said Ben didn't you?

What time shall I get to your house by then? Your all gonna be fucked in the morn lol

Lol shut up Alex. You said Ben didn't you?

What time shall I get to your house by then? Your all gonna be fucked in the morn lol

Yea, ben is the one to watch out for!

Whenever mate, ill be up! as you're not coming on friday, probs wont get pissed now so i wont be a mess :p up for a day on the polos :)

And Scirocco's, supposed to be good weather this weekend in sheffield, what's it like in stoke?

what's your potcode again lol?

And Scirocco's, supposed to be good weather this weekend in sheffield, what's it like in stoke?

what's your potcode again lol?

Supposed to be lovely :)

What needs doing on the rocco? will make a nice change from working on mine,robbos and bens polos :p

and st65rp, you still got my mobile number?

think my exhaust may well be hanging on by mm's now

think my exhaust may well be hanging on by mm's now

Good times :p

I'm off tomorrow dude so bowl round straight after work and we can have a look at it, that might stop you moaning

Edited 16 March, 201115 yr by salty