Yoo

Been on the forum for quite some time, never really got round to posting my Polo up before so here goes!

When I first got him;

Front End;

Most Recent;

Opinions and suggestions welcome :)

Piers

Edited 25 May, 201016 yr by petrolpiers1

like that a lot mate!

sort out you are pissed front grille though

Looks good, I love the wheels.

What indicators are they, they arent crystal clear ones are they, just clear, so not these ones? http://cgi.ebay.co.uk/VW-POLO-94-98-CRYSTA...7#ht_1109wt_939

Looking good, I`ll be watching as this develops.

The side reps are mk4 Golf I believe?

Looks good

Cheeers peeps!

What indicators are they, they arent crystal clear ones are they, just clear, so not these ones? http://cgi.ebay.co.uk/VW-POLO-94-98-CRYSTA...7#ht_1109wt_939

There these one mate;

http://www.venommotorsport.com/product_det...tegory=Lighting

The side reps are mk4 Golf I believe?

Yea they're off my mums Mk4! ha

Future plans include;

Coilovers

Stubby aerial

Front and rear bumpers

I would love to do an engine swap too, however being a student is preventing from this for a long while!

Edited 26 May, 201016 yr by petrolpiers1

Alritee peeps

I've now had my arches rolled and slightly flared, and recently purchased a set of Rokkor Collys fitted by yours truly last weekend,

The ride really isnt as bad as I thought it would be, and for the price its a great product

All in all took around 6 hours to get it set up and level, as my rears kept catching on the arch due to the phatt tyres lol.

Gave it a treat with the clay bar, then wash, polish and wax and wanted to share some pics taken in the lovely weather!

The infamous speedbumps

Boatyard

Sideshot

Dishhhh 15X8

Rearshot

Any comments and Suggestions welcome :-D

thats lush man! love the grill and the wheels. Personally i would slam it more and tint the rear and back windows!

Liking this alot, I usually find RH Cups really boring but they look so good in the side-on pic.

I'd get a valver rear bumper on it, and maybe tint the windows as they don't even look to have the factory tint.

Looks good though :-)

looks cool, all red rears and some gloss black handles would set it off a treat! and more lows! hard to get with 15's though

is it a diy respray or a pro job ?

i love it , looks so clean !!

has it had a Spray job ?

Love the wheels! Nice job so far mate!

thats lush man! love the grill and the wheels. Personally i would slam it more and tint the rear and back windows!

Thanks! I would like it a lil bit lower but I have 205/45 tyres on the rear so cant go any lower until they're changed...also using planks of wood to get up the driveway is a misssion hah

i love it , looks so clean !! has it had a Spray job ?

is it a diy respray or a pro job ?

Cheers fella, The front and rear bumpers have been resprayed in my garage...the finish with a spray gun is on a whole other level to spray cans, otherwise a lot of elbow grease and polish has come into play lol

Does anyone know what stubby aerials fit onto 6Ns with not too much hassle??

Does anyone know what stubby aerials fit onto 6Ns with not too much hassle??

Honda S2000 ones screw straight on.

I had one but it got nicked.

Oh well, what goes around comes around

6n2 rears mate! :) do ittt

Does anyone know what stubby aerials fit onto 6Ns with not too much hassle??

Honda S2000 ones screw straight on.

I had one but it got nicked.

Oh well, what goes around comes around

Ahh quality. Thanks for that...never would of thought an S2000 one was a straight fit!

6n2 rears mate! :) do ittt

I'm tempted..However I think they're too common and would rather have rears that fit properly tbh!

have a few bits left to do and then I'll be really happy with the way it looks. Thanks for all the positive comments =)

Edited 21 June, 201016 yr by petrolpiers1

what splitter u got on the front pal?? it looks more sticky out than a normal 8v one. but it may just be my eyes.

Looks good mate if i were you id space out the rears 10-15mm and slam the front even more

what splitter u got on the front pal?? it looks more sticky out than a normal 8v one. but it may just be my eyes.

Na standard 8v one fella, defo your eyes...however it got modified by a rabbit last night LOL

UPDATEE!

Been busy smoothing and painting a 16v rear of which I fitted last week, really loving the phatness compared to the 8v one ;

looking forward to the Polo show next weekend!!

looks well nice mate

looking a lot better with the valver bumper, de-wiper and 6n2s would finish the back off nicely

yoo

Just thought I'd updatee you all as to how my poloww is standing atm, as I havnt been on here in a while!

Went on a tunnel run in Central London during the early hours of last night which was awesome

I've recently changed the clusters to the original lights as I started to go off the look they gave and am loving the standardness! lol

Also fitted a bee sting arial as one of the lil details.

I will be taking the RH cups off in the next few weeks, which will swapped for the steelies for the winter :(

Heres a few snaps;

Comments/opinions welcome!! Piers

Hi all,

Been getting the polo ready for the Summer.

Ran the steelies up to around a month ago, while I was waiting for the mirror polishing to be completed by Rainbow Polishing up in Birmingham. Got to say I was very impressed with the results, Sessel did a great job.

Picked up 4 195/45 Toyo Proxe T1R's and had them put on at the end of Feb, also fitted some 6n2 rears and much prefer them to the lights I've ran in the past.

Let me know what you think :-)

Piers