Skip to content

Carbon fibre

Featured Replies

So, this morning at half one in a tired state after reading the carbon fibre thread on edition, I bought some carbon fibre wrap from 3M, now I've no idea where to use it :lol:

Anyone using CF anywhere on their mk3? :)

  • Replies 54
  • Views 6.3k
  • Created
  • Last Reply

Top Posters In This Topic

i'm not too sure on the carbon wrap craic tbh, not saying it doesn't look good, but isn't the whole idea of CF that it's light weight and strong? wrapping something in that 3m stuff is neither? lol.

I was quite tempted to do my centre console, but the fad will probably have died out by the time i'd get round to doing it, there's that many more important jobs to do first! :)

How much have you got? I like carbon fibre wrap, but it has to be done well!

I put carbon fibre wrap in the same category as a show roll cage.. pointless. :lol:

Edited by max_crox

  • Author

It's only a little sheet, like 50x30, thinking about smoothing the boot lock off the plinth at the back, and nested of fannying about panting, just wrap it in the carbon

And maybe the little strips in the door handles, and if I've enough left over, the heater contol panel

Edited by Polio

I put carbon fibre wrap in the same category as a show roll cage.. pointless. :lol:

In that case every asthetic modification made to a car is pointless?

The only worthwhile mods to do to a car are all performance?

I've been toying with the idea of getting some for some of the smaller door + dash parts. But i've seen it a lot recently and it will soon be over done so I will not bother.

It can look amazing when done properly, but too much can ruin the look.

As for the whole "the point of carbon fibre is to be light and strong, the vinyl is neither" Even if I could afford real carbon fibre, there would be no point putting it on my 1.2 - 3 cylinder polo. So the vinyl would do me just fine.

It's only a little sheet, like 50x30, thinking about smoothing the boot lock off the plinth at the back, and nested of fannying about panting, just wrap it in the carbon

And maybe the little strips in the door handles, and if I've enough left over, the heater contol panel

yep I've seen a set of them handle inserts in progress at my mates's unit look good theres always the vw badges? could be tricky tho!

^ you could do the VW badges in the same way they do alloys - Vacum chamber, or something like that!

I've got an all smiles scuttle cover, bootlid panel and now a radiator cover on the way ;)

My clock surrounds are CF too although it was glue backed to keep it in place.

I put carbon fibre wrap in the same category as a show roll cage.. pointless. :lol:

In that case every asthetic modification made to a car is pointless?

The only worthwhile mods to do to a car are all performance?

I've been toying with the idea of getting some for some of the smaller door + dash parts. But i've seen it a lot recently and it will soon be over done so I will not bother.

It can look amazing when done properly, but too much can ruin the look.

As for the whole "the point of carbon fibre is to be light and strong, the vinyl is neither" Even if I could afford real carbon fibre, there would be no point putting it on my 1.2 - 3 cylinder polo. So the vinyl would do me just fine.

Where did I say 'every aesthetic modification made to a car is pointless?' I didn't. I said carbon fibre wrap and show cages are pointless.

The show cage.. The main point of a real roll cage is to protect you in a roll, and as a by product, make the car more rigid. A show cage does none of this and in fact could injure you. Totally the opposite of what it is suppose to do. And because of that I find it ugly and pointless. I like the look of a roll cage in a car but if it doesn't do the main job it’s designed to do then to me it’s pointless.

With Carbon fibre wrap.. it’s less pointless but pointless none the less. But its more of a case that personally if I had it on my car and someone came up to me and said wow I like your CF roof/bonnet/dash and they asked how I did it I would have to say 'it’s a sticker.'

You nock the nail on the head with your line

As for the whole "the point of carbon fibre is to be light and strong, the vinyl is neither" Even if I could afford real carbon fibre, there would be no point putting it on my 1.2 - 3 cylinder polo.

If you think there is no point putting real Carbon Fibre on your car.. What is the point of putting fake CF vinyl on you car? Personally I would prefer to see the real item on your car as appose to some fake stuff.

I'm more of an engineer.. I like products that work well and do what they are designed to do, and if they do, then to me they look good. And I don't just mean expensive machined items here, I also mean built in garage items that solves specific problems that the owner had. Pretty much any item that has had some real thought put into it.

As I said before I like aesthetic things I've painted my wheels bright blue.. not for any other reason than that I like the colour :) I like a nice looking car but I don't like something imitating something its not.. Its kinda like a fake Rolex watch, it looks ok but when you look at it close it it’s disappointing.

I put carbon fibre wrap in the same category as a show roll cage.. pointless. :lol:

As for the whole "the point of carbon fibre is to be light and strong, the vinyl is neither" Even if I could afford real carbon fibre, there would be no point putting it on my 1.2 - 3 cylinder polo. So the vinyl would do me just fine.

bold indicates fail. I fucking hated my 12v polo... good car, but the engine really lets them down!

If you want carbon fibre, buy carbon fibre, don't cheap out and it'll not look cheap and nasty. You gets what you pays for.

If you're looking for a new girlfriend, you wouldn't cheap out and go for the next best thing would you? Unless you're into transvestites?

Get some vinyl wood effect. It'll make your car look light like a balsa plane.

I used to have a wooden car with wooden wheels, wooden doors and a wooden engine. It woodn't work.

As long as your having fun, that's what counts.

Too many haters! Does this look so bad? I think it looks great:

002.jpg

003.jpg

It doesn't matter whether or not it makes it lighter. Or even if its impracical or dangerous. It's about what YOU want :) I personally like it, it looks better than the really tacky stuff, and at least looks like real carbon twill!

Also, what about real carbon skinning then? Same part wrapped in proper carbon fibre? Its not lighter but its real carbon fibre.

Where did I say 'every aesthetic modification made to a car is pointless?' I didn't. I said carbon fibre wrap and show cages are pointless.

I never said you did, But due to the fact that show cages and carbon vinyl are there purely for asthetics and these are "pointless" then you could easily categorise every asthetic modification into that category. - I do agree on the show cages thing though!

If you think there is no point putting real Carbon Fibre on your car.. What is the point of putting fake CF vinyl on you car? Personally I would prefer to see the real item on your car as appose to some fake stuff.

Again, for asthetics. I wouldnt be bothered about the weight saving, The 3M stuff looks awesome so why spend the money. - If I had a track slag then I would be voicing a different opinion.

But thats the thing, Everyone will have different opinions on carbon wrapping depending on the use of the car.

I cant afford the insurance on anything faster at the moment (Panda, agree with you on the engine! its been reliable though) so I would be happy with the vinyl on my current car - Not that I will be wrapping anything in it because thats what everyone is doing at the moment.

my mates got in on his 3door cozi bonnet looks smart as

Carbon fibre wrap... it’s less pointless but pointless none the less.

:? I'm confuseled :lol: so is it more or less pointless than less than pointless?

Where did I say 'every aesthetic modification made to a car is pointless?' I didn't. I said carbon fibre wrap and show cages are pointless.

I never said you did, But due to the fact that show cages and carbon vinyl are there purely for asthetics and these are "pointless" then you could easily categorise every asthetic modification into that category. - I do agree on the show cages thing though!

If you think there is no point putting real Carbon Fibre on your car.. What is the point of putting fake CF vinyl on you car? Personally I would prefer to see the real item on your car as appose to some fake stuff.

Again, for asthetics. I wouldnt be bothered about the weight saving, The 3M stuff looks awesome so why spend the money. - If I had a track slag then I would be voicing a different opinion.

But thats the thing, Everyone will have different opinions on carbon wrapping depending on the use of the car.

I cant afford the insurance on anything faster at the moment (Panda, agree with you on the engine! its been reliable though) so I would be happy with the vinyl on my current car - Not that I will be wrapping anything in it because thats what everyone is doing at the moment.

Sorry don't think I was having a major dig at you I wasn't.. even though it read like it did. just adding my point of view :)

The reason why I don't put show cages and CF vinyl in the same category as other aesthetic change is that they are imitating something but have none of their qualities. People like show cages because it looks like you have a roll cage in there when I see it I think that someone has just put a bunch of scrap metal in their car. The reason a roll cage looks good is that it has a purpose and it works.

CC bumpers, wheels, mirrors. checking your roof etc I don't particularly mind even though I personally don't like the finished product. And i suppose even CF vinyl is not that bad, its better than colour coding the dash :) but it is bordering on the line as it imitating something its not.

Show cages just really annoy me! :-D

Edited by max_crox

Carbon fibre wrap... it’s less pointless but pointless none the less.

:? I'm confuseled :lol: so is it more or less pointless than less than pointless?

:lol:

well if you read the dam thing it will be all clear!... its less pointless than less than pointless... now get back to finishing you car!! :lol:

Carbon fibre wrap... it’s less pointless but pointless none the less.

:? I'm confuseled :lol: so is it more or less pointless than less than pointless?

:lol:

well if you read the dam thing it will be all clear!... its less pointless than less than pointless... now get back to finishing you car!! :lol:

Meh, I dont get involved with these petty arguments!

Cant finish the car, waiting on parts :disgust:

I've got an all smiles scuttle cover, bootlid panel and now a radiator cover on the way ;)

My clock surrounds are CF too although it was glue backed to keep it in place.

Nice work Stresshead! Is it true that they've stopped trading? I'm really keen on getting some C/F bittys for my gt.

Am thinking would carbon arches, sills and rub strips work?

how much interest is there in carbon fibre from the polo world?

I get what you were saying, and agree to most! But just wanted to voice my opinion.

Its hard having a discussion over forums because people misunderstand your tone. I wasn't trying to have an argument or disagree with you just for the sake of it.

Carbon or no carbon, its personal style and preference and the type/style of car plays a huge part!

- and just in case, no hostile or controversy causing tone meant in this post! =D haha

I've done my centre console, vents and door handles (exterior), although I need to do one of the door handles and the centre console again as I fucked up lol.

Here is a shocking picture for you...

31852_399461490815_507410815_4177814_591

i have a carbon fibre fuel cap :) cant wait to put it on

I've done my centre console, vents and door handles (exterior), although I need to do one of the door handles and the centre console again as I fucked up lol.

Here is a shocking picture for you...

31852_399461490815_507410815_4177814_591

Mint thats what i wanted!

I've got an all smiles scuttle cover, bootlid panel and now a radiator cover on the way ;)

My clock surrounds are CF too although it was glue backed to keep it in place.

Nice work Stresshead! Is it true that they've stopped trading? I'm really keen on getting some C/F bittys for my gt.

Am thinking would carbon arches, sills and rub strips work?

how much interest is there in carbon fibre from the polo world?

I just buy bits as i find em ;) All smiles ceased trading quite a while ago now so any stuff made by them seems to get scene tax added to it! They did afew other bits for the polo like an expansion bottle (good luck finding one tho!) but i'm not sure what else there was.

Carbon arches would cost you a small fortune. My next bits to CF are the doorcards (front and back) and a cover for the spare wheel well. speak to the guys at performance trim ;)

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.