first off sorry for the poor pics I'm no good with camera,16v bumpers came today so will be going for paint next week ride hight needs tweeking after i camber the fronts in abit later today,

comments welcome

Edited 26 September, 201015 yr by gaz.veedub

looking nice m8 n them pontiac wheels sit just right think u should paint rear badge white or black and clear indicators on front and tinted rears

looks ace mate, you need to be alot lower to pull them wheels off tho imo!

looking nice m8 n them pontiac wheels sit just right think u should paint rear badge white or black and clear indicators on front and tinted rears

cheerz mate good point about the badge ill get on it.and the indicators are on there way :-)

looks ace mate, you need to be alot lower to pull them wheels off tho imo!

thanx,it sits lower now, that was just after fitting the coilovers,the rear cant go any lower or it will mash the wheels let alone the tyres but as i say it has sat down abit from that pic.and the front will be going down mid week

Did you miscalculate the offset on your wheels?

pulled arches and a bit lower i think

pulled arches and a bit lower i think

x2

pulled arches and a bit lower i think

x2

x3 and i dunno why but i think the lower bit of the 8v bumper looks odd, or is it just me?

Did you miscalculate the offset on your wheels?

no why??

pulled arches and a bit lower i think

ill get some more pics up coz it sits lower now its settled,but the rear arches have been rolled and flared abit fronts are ok now I've camberd them up.trackings out a smidge thou.

pulled arches and a bit lower i think

x2

x3 and i dunno why but i think the lower bit of the 8v bumper looks odd, or is it just me?

is it coz theres no grill in the bottom?i now have 16v bumpers so not fussed with them should have them back end of next week.

:-D

This care looks the nuts up close, the pic's do it no justice. The fastest car build ever ha top work gaz. dibs on the wheels

Will finish it with them 16v bumpers mate

Edited 15 August, 201016 yr by gt4eva

to much poke.

wheels YES just not sat like that I'm afraid....

just my input..

This will work sweet with a few little tweaks upfront.. camber.. smaller adapters.. or both if poss. Will pull it all together for sure, just looks too front heavy right now imo.

Awesome wheels though

to much poke.

wheels YES just not sat like that I'm afraid....

just my input..

+1 on that imho

just a tad too much and bring it down a bit more if you can... :-)

cheerz for the comments guys good or bad there all welcome

had a play with the camber and hight so heres how it sits at the mo

Edited 20 August, 201016 yr by gaz.veedub

This will work sweet with a few little tweaks upfront.. camber.. smaller adapters.. or both if poss. Will pull it all together for sure, just looks too front heavy right now imo.

Awesome wheels though

camber done and adapters cant get any smaller i had them custom made the 15mm 4x100-5x120 try geting hold of a set of them!

Ahh, feared they would already be 15's... fair play.

i'd be tempted by some subtle arch flaring, just to house them a little better..

other than that, keep it up! they look tight in white.

Ahh, feared they would already be 15's... fair play.

i'd be tempted by some subtle arch flaring, just to house them a little better..

other than that, keep it up! they look tight in white.

cheerz bud,as daft as it may sound they really do look a better fit when you see them in the flesh! much better now I've had a mess,may camber the front a smidge more yet

this is how the car was at the unphased meet on thursaday

I appreciate what you have done but the camber let's it down for me abot 11 post down on here http://www.clubpolo.co.uk/forum/index.php?...209136&st=0 he's fit the wheels under the pulled and flared arches which gives the car more of a driveable apperance etc just my 2p!

I appreciate what you have done but the camber let's it down for me abot 11 post down on here http://www.clubpolo.co.uk/forum/index.php?...209136&st=0 he's fit the wheels under the pulled and flared arches which gives the car more of a driveable apperance etc just my 2p!

fair comment mate,i dont mind if poeple arnt sure,or if they do or dont like it but all feed back is welcome :-) i love the car and it looks so much better in the flesh.the cars a budget build and is my run around car as my ventos not finished yet so the arches were rolled and shims fitted to keep cost down,the cars been done over 3-4 weeks all in all,thats a full paint job rolled arches shims fitted, the wheels+refurb custom adaptors, new tyres all round new seats, steering wheel new coilovers and a set of 16v bumpers at the paint shop mot and new door cards and trim fitted so its got room to be tweeked!

Needs to be a lot lower to pull them wheels off!

Simon's Black Polo has mastered Pontiac stance!

Needs to be a lot lower to pull them wheels off!

Simon's Black Polo has mastered Pontiac stance!

i can understand people saying go lower I'm a big lover of lows as my ventos on its spuds but come on if you look at simons rear in the link above it the same if not higher than mine and yes the fronts lower so ill give you that but give it time people :-D

i agree with you dude, they're near enough the same. his looks lower because he's got 16v bumpers. thats the problem with 8v bumpers, you have to go stupid low to pull off such a big wheel. i think once you have the 16v bumpers on it'll help.

keep it up dude, I'm liking it

shot of the new steering wheel

and just a random one of the wheel!

i agree with you dude, they're near enough the same. his looks lower because he's got 16v bumpers. thats the problem with 8v bumpers, you have to go stupid low to pull off such a big wheel. i think once you have the 16v bumpers on it'll help.

keep it up dude, I'm liking it

cheers bud :-) as you say the 16v bumpers will go a long way to help the look of the ride hight,ill post some pics the min i fit them.

Edited 21 August, 201016 yr by gaz.veedub