I am finally going ahead with my planned engine conversion and so the Gt engine is being broken and up for sale. It has done 150k and still pulls like a train. It was Kerrlys old gt and was rolling roaded at 103bhp.

Schrick 268/268 cam £SOLD

4-2-1 Manifold and decat pipe £SOLD

Gt Inlet £25

Ported and Polished TB £25

Gt Ecu with Poloace Chip £40

Gt Block and head has done 150k with fsh £100

Golf Gti AFM £30

Injectors and Fuel Rail £50

Gt Dizzy with new cap and rotor arm and leads £50

All prices are plus postage but most things can be sent for around £5.

I'm sure there are plenty of other things i have forgotten so i'll post them up as i remember.

Pm on here or text 07818798093 and i'll get back to you asap as my working hours are quite awkward.

Cheers,

Joe

Edited 7 September, 201016 yr by .Joe

Will the 4-2-1 fit a standard 1.3 spi? if it will then I've got first dibs on that :) £125 posted?

Will the 4-2-1 fit a standard 1.3 spi? if it will then I've got first dibs on that :) £125 posted?

It will fit an spi yes. Postage, due to size and shape will be around £15. Pm me and we'll sort something out.

Cheers,

Joe

It is a great set up.

The PoloAce chip fitted when i sold it was the one without the rev limiter raised.

And the TB has a swanky knife edged finish to it which took a mate ages to do.

If i had a Polo now i would have bought the whole setup as it was great fun with the GT box.

It is a great set up.

The PoloAce chip fitted when i sold it was the one without the rev limiter raised.

And the TB has a swanky knife edged finish to it which took a mate ages to do.

If i had a Polo now i would have bought the whole setup as it was great fun with the GT box.

It is a brilliant set up. I almost feel shameful removing it, but the new engine should be rather evil...

what was the idle like with the 268 cam? and do you know how many miles it has done?

also was the golf gti afm all set up properly?

cheers pete

Got any pics of the throttle body?? Detail of the port and polishing please :-)

Pmd about tb and afm!

what was the idle like with the 268 cam? and do you know how many miles it has done?

also was the golf gti afm all set up properly?

cheers pete

It doesnt idle badly at all. So long as everything else is set up, fresh sensors and all in good working order then you will barely notice it to be honest. Its only when your engine has the arsehole about something else that it seems to make it more apparent. The cam has done approximately 25k.

I have set the golf gti afm up using my AFR gauge in car on the road and also properly using a Gas analyzer. It runs very well.

Got any pics of the throttle body?? Detail of the port and polishing please :-)

Will take pictures this afternoon. It is still on the car as i am using it up until this friday the 20th when it comes off the road.

Pmd about tb and afm!

Replied!

Damn why do you have to be at the other end of the sodding country!!

Damn why do you have to be at the other end of the sodding country!!

Can post bits. What were you after?

Joe. Got any pics of this manifold your posting tomoz?

:ninja: Camshaft sold.

Joe, u posted today?

MORE PARTS NOW FOR SALE

To all those that are interested and have bought parts:

The engine was removed last night. I have taken photos and boxed up everything that has been sold and will get it out to you on monday morning. Sorry for any late replies to Pms, i am working 15hr days 6 days a week at the moment and after a 5am start and late finish, its very difficult to get on here.

I shall pm all those who have purchased anything on monday to confirm that it has been sent out.

Cheers,

Joe

Your the man

pm sent regarding the gti afm, trottle body and inlet manifold.

would you be willing to split the head from the engine?

gaz

bollocks :(

wish i see this thread erlier

would have had that cam off you :(

I am finally going ahead with my planned engine conversion and so the Gt engine is being broken and up for sale. It has done 150k and still pulls like a train. It was Kerrlys old gt and was rolling roaded at 103bhp.

Schrick 268/268 cam £SOLD

4-2-1 Manifold and decat pipe £SOLD

Gt Inlet £25

Ported and Polished TB £25

Gt Ecu with Poloace Chip £40

Gt Block and head has done 150k with fsh £100

Golf Gti AFM £30

Injectors and Fuel Rail £50

I'm sure there are plenty of other things i have forgotten so i'll post them up as i remember.

I can sell the whole conversion but it will be without the gt gearbox £325 ono collected, personally i think this is a very fair price as it pulls like a train and has been rolling roaded at 103bhp.

Pm on here or text 07818798093 and i'll get back to you asap as my working hours are quite awkward.

Cheers,

Joe[/quote have you still got the ecu mate and can i pay by paypal

Edited 28 August, 201016 yr by jhp

I had first dibs on the AFM, Joe still hasn't got back to me since his last PM!

UPDATED. Photos are being uploaded as we speak. Sorry guys its been a long few weeks. Replied to all PM's those who have the first pm regarding something have first refusal.

Cheers,

Joe

Would you send the inlet manafolid for 25?

Ported and Polished TB £25

so are you posting this for an extra £5?

cheers, miles.

Ported and Polished TB £25

so are you posting this for an extra £5?

cheers, miles.

Throttle body has gone sorry. All prices are plus postage.. so the inlet would be about £32 posted.

Cheers,

Joe