this is listed in the cars breaking as i'm breaking a 16v 1997 6n polo

but i'll list the engine seperately as a package ideal for conversion - simply bolt a gearbox on and go.

complete engine with ALL ancillaries

down pipe

engine mounts

ecu

key + immob box + aerial

full engine loom

engine bay fuel lines

all water pipes bar rad hoses (borrowed for my jetta) same as all petrol 6n hoses though

radiator

stock airbox

throttle cable

16v clocks showing engine mileage

engine is completely original, still has plug cover and dizzy shroud.

no rattles, taps or smoke.

WILL NOT SPLIT

still running in car, should be removed tomorrow evening in the proper manner, no hacking, cutting bending or breaking of anything. i've done lots of conversions so know what you need to transplant it and how to dismantle it properly so it can be easily dropped into it's new home.

Olly - 07789 18 48 58

collection from Maidenhead

£250 for the lot NO OFFERS

Edited 23 September, 201015 yr by polo6n2g40

can include fuel pump too if going from single point injection to MPI.

£150? had to ask. sorry

250 is a steal in my opinion gd luck with sale mate !

thanks bud. :-D

BUMP - on ebay now

give me a couple of days i will 99% take this!

just to point out this is almost every thing you need from the mk4 to convert a mk3 to 16v AFH with the mk4 injection system (has it got the flywheel and starter with it olly?).

pretty much the only other thing's needed would be the fuse box, the plug from the f/b with the wire for the fuel pump on it, f/b to immob wires and the f/b to ignition wires. then hay presto 100bhp mk3 polo for less than 300 notes.

plus you could get money back by selling the rad, clocks and fuel pump

this is a billy bargain

thanks for the sweet bump bud, yea flywheel, clutch and starter still bolted on. :-)

Edited 1 October, 201015 yr by polo6n2g40

deposit taken.

give me a PM if the sale falls through!

is this still for sale?

Nope - its in my garage

Nope - its in my garage

^^^

hi i dnt supose you would sell the ecu key and black box sepratly?

Just out of interest, does an AFH lump just bolt into existing mk3 mounts? I realise it isnt an FAQ section but it seems a few clued up people have said their bit in this thread lol :)

Cheers, Amar

Just out of interest, does an AFH lump just bolt into existing mk3 mounts? I realise it isnt an FAQ section but it seems a few clued up people have said their bit in this thread lol :)

Cheers, Amar

thats because the guy whos selling it is a top man a yeah very clued up take a lil look at his bora schhhhweeet

did this sell?

its in my garage

Mounts need modifying aswell, take a look at renegade440's thread...