Skip to content

roof lining on a 6n

Featured Replies

how do you do it and what do you get it back on with

  • Replies 19
  • Views 7k
  • Created
  • Last Reply

Top Posters In This Topic

piece of pi55 mate - did mine in about 10 minutes... takes about 20 to get it back in as it's a bit tight!!

simple giude?

1) unscrew and remove all sunvisors and grab handles;

2) pull the interior light down (one side first, then the other will follow) and disconnect;

3) open boot and remove plastic trim that covers the back end of the roof lining (just pull it hard, the clips are all push-fit);

4) open doors and slide your fingers between the rubber trim and the roof lining to pop the lining out;

5) do the same on all the hard plastic trim on the pillars (you may need to pull the trim away slightly, but as before the clips are all puchfit, so pull hard and they'll pop off);

6) the lining will probably be 90-100% out now and resting on your head - go to the rear of the car and remove through the boot.

Refitting is the reverse. It's the edge trims coupled with the grab handles and sun visors that hold it in place.

Simples ;)

the man above couldn't have said it better. Remember you've to undo the seatbelt points too tho.

Do you? I didn't :oops:

nah i just pulled the tops of the pillar trims 'down'

heres my latest re-trim :) :

2010-05-17164103.jpg

Edited by stixie mk4

piece of pi55 mate - did mine in about 10 minutes... takes about 20 to get it back in as it's a bit tight!!

simple giude?

1) unscrew and remove all sunvisors and grab handles;

2) pull the interior light down (one side first, then the other will follow) and disconnect;

3) open boot and remove plastic trim that covers the back end of the roof lining (just pull it hard, the clips are all push-fit);

4) open doors and slide your fingers between the rubber trim and the roof lining to pop the lining out;

5) do the same on all the hard plastic trim on the pillars (you may need to pull the trim away slightly, but as before the clips are all puchfit, so pull hard and they'll pop off);

6) the lining will probably be 90-100% out now and resting on your head - go to the rear of the car and remove through the boot.

Refitting is the reverse. It's the edge trims coupled with the grab handles and sun visors that hold it in place.

Simples ;)

That's how I did mine but how did you get the roof lining looking so good what did you use fabric or paint ?

who's mine?

who's mine?

Yeah pal I think is there a special way to put fabric on the roof lining ?

i used carpet glue,

spray the back of the fabric

spray the roof liner

wait a minimum of 5 mins no more than an hour

then place the fabric onto the liner a small section at a time and smooth it out (if it wrinkles just pull it up and smooth it out)

2010-05-15173527.jpg

then cut holes for grab handles and visors etc then leave a while (i left mine overnight) for the glue to 'cure' properly.

2010-05-15183030.jpg

i used carpet glue,

spray the back of the fabric

spray the roof liner

wait a minimum of 5 mins no more than an hour

then place the fabric onto the liner a small section at a time and smooth it out (if it wrinkles just pull it up and smooth it out)

2010-05-15173527.jpg

then cut holes for grab handles and visors etc then leave a while (i left mine overnight) for the glue to 'cure' properly.

2010-05-15183030.jpg

Oh I got that stuff in the van at work sure the boss wnt need it lol cheers for tha pal thought it wouldof been a real task

Very easy to do, but use Hi Temp Spray adhesive, called Trim Fix available on eBay,

here's what I did last year, it's now being changed to something top secret.

trimming3006.jpg

trimming3007.jpg

Yep, I did mine with some spray glue from Hobbycraft - exactly the same, spray both bits, wait for them to go really tacky, then lay it over the headlining. Gave it 24 hours to cure, then pop it back in!

No photos of mine in the car atm (because I'm still working on the interior), but this is what it looked like before I reinstalled:

DSC_0026.jpg

that awesome fabric dazzler :)

Sorry to hi jack this thread but what type of fabrics can be used?

Cheers tom

thanks stixie, looks even better in the car ;)

Tom - any fabric at all! As long as you can find some glue strong enought to hold it, it'll work!

thanks stixie, looks even better in the car ;)

Tom - any fabric at all! As long as you can find some glue strong enought to hold it, it'll work!

Cheers mate will get on ebay after work and see what funky patterns are to be had

Tom

eye, ebay or just google "camper van fabrics" that brings up loads!

or pop along to your nearest market...

or Ikea ;)

eye, ebay or just google "camper van fabrics" that brings up loads!

or pop along to your nearest market...

or Ikea ;)

Ohhhh thats just reminded me dunelm stores sell fabric

Tom

  • 3 months later...
piece of pi55 mate - did mine in about 10 minutes... takes about 20 to get it back in as it's a bit tight!!

simple giude?

1) unscrew and remove all sunvisors and grab handles;

2) pull the interior light down (one side first, then the other will follow) and disconnect;

3) open boot and remove plastic trim that covers the back end of the roof lining (just pull it hard, the clips are all push-fit);

4) open doors and slide your fingers between the rubber trim and the roof lining to pop the lining out;

5) do the same on all the hard plastic trim on the pillars (you may need to pull the trim away slightly, but as before the clips are all puchfit, so pull hard and they'll pop off);

6) the lining will probably be 90-100% out now and resting on your head - go to the rear of the car and remove through the boot.

Refitting is the reverse. It's the edge trims coupled with the grab handles and sun visors that hold it in place.

Simples ;)

can this guide be used on an open air model? or does it require more work to get the head lining out due to the roof? cheers

This topic came in handy

I wanted to do this to my old car but never had the effort , now i have a car thats not being used I'm going to do it. Handy how it all comes off.

Now everyones done it its going to be a "Zomg you copied me" but , each to thier own.

indy , that looks really well done. Followed your topic a while back. jesus you must have spent loads.

I'm a college student working part time to its a budget build for me :/ , Cant afford getting body work done which is a shame as it will effect the finished car , although i doubt ill finish il keep adding and adding

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.