Skip to content

oh dear...

Featured Replies

Good Morning Nick,

Many thanks for your enquiry with us at JBS.

For a 1.8T engine conversion into your 6N2 Polo you would be looking at a starting price of around £7,500 + VAT. For this we supply and fit the engine, carrying out any fabrication, wiring and plumbing required to get the engine in and running to an almost OEM finish.

We also offer further modifications in the form of suspension, brakes and further engine tuning which obviously comes in at additional cost.

Hope this is of some help and should you have any further questions or queries please don't hesitate to ask.

Regards

Seb Hampson

Parts/Sales Advisor

OH DEAR

I'm OFF TO ROB A BANK

  • Replies 55
  • Views 4.7k
  • Created
  • Last Reply

Top Posters In This Topic

  • Author

to be honest i think that is going to be my next move! lol sod paying 8 grand when i can get a newer car with the same engine!

this needs to be pinned in the engine section for the next time some one ask's how much work it is to fit a 1.8t in their polo :lol:

  • Author

yep lol all you have to say to people is TOO MUCH ha

JBS are one of the most expensive companies that'll do it iirc, then again they seem to be the best so you get what you pay for, that's the company that did Ash's polo I think. They'll be others that'll do it for less.

yeh but the engine isnt going to be out of a crashed golf, i presume that they will buy a brand new engine and fit that??? or youd hope

plus it takes all the hassle that simmy had with his of sourcing parts etc...

only worrying factor, is what are they charging for labour =O

  • Author

the whole idea of the 1.8T seems VERY VERY expensive, although it would be heaps of fun! :)

I'm sure for that kind of money, they would do a cracking job!

But unless you have a lot of cash to have fun with I wouldn't bother.

Cheers

Josh_6n2_Polo

Just done a little math and the vat would come to £1312.50 so altogether it would cost £8812.50.

FAIL

Could definitely do it for less than a grand

Could definitely do it for less than a grand

not to create any beef here , but if you could do this kind of conversion for LESS than a grand why don'y you start offering the service ? scourcing engine , box , loom etc , the fabrication , time and and the burst knuckles , i guess you'd be bankrupt with many angry customers at your door in no time , never mind the lawsuits if your bodging wasn't upto standard .

think about it

it is this price for a reason , they have spent loads of time on this to hone the technique , you can't buy experience

i'm sure at that price there will be an aftersales service and warranty etc

so before you go slagging someone elses business and state that you could do it for nearly a 10th of the price , engage your brain 1st

and if you do begin to offer this as a service for less than a grand (if it is up to standard) , i'll be your 1st customer customer

/\ didn't know that JBS had their own profile on here! :)

Just a joke :D

  • Author
:lol:
Could definitely do it for less than a grand

not to create any beef here , but if you could do this kind of conversion for LESS than a grand why don'y you start offering the service ? scourcing engine , box , loom etc , the fabrication , time and and the burst knuckles , i guess you'd be bankrupt with many angry customers at your door in no time , never mind the lawsuits if your bodging wasn't upto standard .

think about it

it is this price for a reason , they have spent loads of time on this to hone the technique , you can't buy experience

i'm sure at that price there will be an aftersales service and warranty etc

so before you go slagging someone elses business and state that you could do it for nearly a 10th of the price , engage your brain 1st

and if you do begin to offer this as a service for less than a grand (if it is up to standard) , i'll be your 1st customer customer

LOL, that'll get you a 20% discount mate, well done. really don't think he was slagging the buisness off either, so engage your brain first.

it is very possible to do it for around a grand if you're doing it all yourself, sourcing your own bits and have the know how.

Could definitely do it for less than a grand

not to create any beef here , but if you could do this kind of conversion for LESS than a grand why don'y you start offering the service ? scourcing engine , box , loom etc , the fabrication , time and and the burst knuckles , i guess you'd be bankrupt with many angry customers at your door in no time , never mind the lawsuits if your bodging wasn't upto standard .

think about it

it is this price for a reason , they have spent loads of time on this to hone the technique , you can't buy experience

i'm sure at that price there will be an aftersales service and warranty etc

so before you go slagging someone elses business and state that you could do it for nearly a 10th of the price , engage your brain 1st

and if you do begin to offer this as a service for less than a grand (if it is up to standard) , i'll be your 1st customer customer

it would be easy to do for under 1K if you're a skilled fabricator and know the right people to buy parts from. i've seen some pretty crazy engine conversions done buy people with little more than a welder, a vision and the skills to pull it off.

Olly on here has done mk2 golf 1.8t conversions for not very much from what he was saying on here before, and people like adapterman sticking VR6 engine's in mk4 polo's using only his skill's.

personally i would say do some home work before engaging your mouth (or finger tips in this case :lol: ). also at no point did he slag off any one's work, he just said he could do it for a lot less.

Never said I'd offer it as a service for less than a grand, that would be doing it for myself! I just find it astonishing how much JBS are charging, you'd think if they were experienced in doing it, then 12-15 hours of labour would see it done. There's got to be £5k of pure profit in that price! Hats off to them though, their workshop never seems to be empty!

Personally don't like the idea of an engine conversion that costs more than a superior car!

Thats a rip off at that price

tried TSR performance?

You'd get high performance brakes included for that price! sure its about 5k for them to just drop you a 1.8t in.

  • Author

yeah think its about 4600 for TSR which is alot cheaper

the start of my post said , i've no beef

and it would make sense if he/she could do it under a grand to do it on a professional level

parts may be had for under a grand to do it , but how long would it take to do from scratch ? (without experience)

i'd say if 1 man was doing this , (now remember 1 man) it would take him at least 2 months at least start to finnish , with many a sore head in the process , scourcing , ordering parts making sure they are right (may be lucky) as not every second hand part is right , fabricating mounts etc , engine would be in and out more times than a certain part of your body on a night out drinking 14 pints of lager to get it right .

so then break it down a little 2 months work thats at least £3,000 if your a decent mechanic may even be 4 if your that talented , then take into consideration the amount of tools that would be needed , premises , etc etc

seriously think about it ,

i'm not saying that you couldn't do it , but what you have to think of is experience , knowlage , premises and not to forget it's a business , and it's that price for various reasons .

if you were to do this for under a grand in the same time frame as these guys , it would probably be like a bag of spanners in comparrison to a full snap on or facom tool kit

sackrace.jpg
  • Author
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:

:lol: yes indeed , that this is the best retort , and the childish picture

what can i say

and i'll bet if any of the companies that offer the service read this thread they would agree

Could definitely do it for less than a grand

not to create any beef here , but if you could do this kind of conversion for LESS than a grand why don'y you start offering the service ? scourcing engine , box , loom etc , the fabrication , time and and the burst knuckles , i guess you'd be bankrupt with many angry customers at your door in no time , never mind the lawsuits if your bodging wasn't upto standard .

think about it

it is this price for a reason , they have spent loads of time on this to hone the technique , you can't buy experience

i'm sure at that price there will be an aftersales service and warranty etc

so before you go slagging someone elses business and state that you could do it for nearly a 10th of the price , engage your brain 1st

and if you do begin to offer this as a service for less than a grand (if it is up to standard) , i'll be your 1st customer customer

it would be easy to do for under 1K if you're a skilled fabricator and know the right people to buy parts from. i've seen some pretty crazy engine conversions done buy people with little more than a welder, a vision and the skills to pull it off.

Olly on here has done mk2 golf 1.8t conversions for not very much from what he was saying on here before, and people like adapterman sticking VR6 engine's in mk4 polo's using only his skill's.

personally i would say do some home work before engaging your mouth (or finger tips in this case :lol: ). also at no point did he slag off any one's work, he just said he could do it for a lot less.

ask olly then how long it took him to do , put a figure on the man hours and start there , i'm sure olly will tell you's it's not that easy and the time that it consumed of his would have been quite hefty

anything can be done , but at a price

what these guys are offering is a finnished article

the OP was aimed at provoking this kind of reaction

if it could be done by anyone for a grand , every tom , dick and harry on this site would have one parked on their drive waiting till they grew up a little to afford the insurance to drive it

To be honest, a 1.8T into a Mk2 Golf could be done for £300. There's no fabrication, everything bolts straight in. The hardest bit is wiring, but if you have wiring diagrams and enough of the donor car then you can just run it on OE management. It really IS that simple.

The 6n needs a bit of cutting and welding but otherwise the same job.

Of course it can be done for a grand. Not by anyone though, I never said anyone! I mean someone who is confident in their welding skills! You can get complete 1.8T cars for £500 if you look hard enough, then spend a few quid on welding wire and gas. Could even rebuild the head and do the rings and shells in that budget. Buy some angled bends and straight bits of exhaust pipes and build an exhaust. Yes it will take time, but not £5000+ more time!

Sure, if you have a big bank balance then those guys will probably make your engine bay look prettier, but it won't be any more effective.

I don't see how people are making this out to be a big expense.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.