Skip to content

oh dear...

Featured Replies

This thread is similar to where someone made up a £6000+ price list on turboing a Mk4 1.4 8v...

Gonna say it again - could be done for a grand.

  • Replies 55
  • Views 4.7k
  • Created
  • Last Reply

Top Posters In This Topic

This thread is similar to where someone made up a £6000+ price list on turboing a Mk4 1.4 8v...

Gonna say it again - could be done for a grand.

list your prices then

To be honest, a 1.8T into a Mk2 Golf could be done for £300. There's no fabrication, everything bolts straight in. The hardest bit is wiring, but if you have wiring diagrams and enough of the donor car then you can just run it on OE management. It really IS that simple.

The 6n needs a bit of cutting and welding but otherwise the same job.

Of course it can be done for a grand. Not by anyone though, I never said anyone! I mean someone who is confident in their welding skills! You can get complete 1.8T cars for £500 if you look hard enough, then spend a few quid on welding wire and gas. Could even rebuild the head and do the rings and shells in that budget. Buy some angled bends and straight bits of exhaust pipes and build an exhaust. Yes it will take time, but not £5000+ more time!

Sure, if you have a big bank balance then those guys will probably make your engine bay look prettier, but it won't be any more effective.

I don't see how people are making this out to be a big expense.

you are paying for a refined finnished product , not something stuck together like bluepeter with sticky back plastic and blutack

and you can buy a mk2 valver for a£500 but it won't look as nice as yours in your avatar will it

this is the point

time is money

True. I'm an Araldite and chewing gum guy though. Might not look pretty, but pointless spending good money when it does the job just as well as anything else.

But you do have your points as well - a good conversion from a reputable company is never going to be cheap.

True. I'm an Araldite and chewing gum guy though. Might not look pretty, but pointless spending good money when it does the job just as well as anything else.

But you do have your points as well - a good conversion from a reputable company is never going to be cheap.

i like yer patter 8-) juicyfruit or spearmint ? , i find juicyfruit that little bit more workable and sets firmer :lol:

at least you can see reason , unlike some of the other childish replies that i recieved to my valid comments :thumbsup:

if it could be done by anyone for a grand , every tom , dick and harry on this site would have one parked on their drive waiting till they grew up a little to afford the insurance to drive it

wonderwoman.gif

if it could be done by anyone for a grand , every tom , dick and harry on this site would have one parked on their drive waiting till they grew up a little to afford the insurance to drive it

wonderwoman.gif

oh no you didn't ?

wtf

I think its all relative. Its almost the same as a service, you could go to a dealer and pay a couple of hundred quid, or you could pay 50 quid for parts and fit them yourself. If you know what your doing and can take the labour out of the equation then its bound to be cheaper. I think its unfair to say a 'diy mechanic' is gunna do a worse/less perfect/not as pretty job as someone from a reputable company though. Some 'diy mechanics' may have equal/more experience of a conversion than the reputable company themselves!

Its often down to supply and demand with a company, if there is not much of a demand (bear in mind this in relative business terms) and not many people to do the conversion then they can charge more. If there is a demand then there will be more people doing the conversion, hence competing together, hence price will be less!

This competition can be taken out completely if you can do it yourself though.Then it purely comes down to parts and tools in which case it's bound to be cheaper. If someone cant do the job themselves then it comes back to my point above!

Basically what I'm trying to say is, yes it probably can be done for a grand, but only if you know how. If you dont, then a reputable company is the only way to go. In which case their asking price IS the price of a conversion! :)

True. I'm an Araldite and chewing gum guy though. Might not look pretty, but pointless spending good money when it does the job just as well as anything else.

But you do have your points as well - a good conversion from a reputable company is never going to be cheap.

i like yer patter 8-) juicyfruit or spearmint ? , i find juicyfruit that little bit more workable and sets firmer :lol:

at least you can see reason , unlike some of the other childish replies that i recieved to my valid comments :thumbsup:

all that was said is that you can do it on your driveway for less than a grand. you're the one whos going a bit mental. :lol:

we can all see what you're saying. obviously this company wont just throw it in, hold it together with a few cable ties and a have a mug of tea and think they've done a cracking job. we all know if you get a company to do something for you it'll cost alot more than doing it yourself. no one was disputing that.

True. I'm an Araldite and chewing gum guy though. Might not look pretty, but pointless spending good money when it does the job just as well as anything else.

But you do have your points as well - a good conversion from a reputable company is never going to be cheap.

i like yer patter 8-) juicyfruit or spearmint ? , i find juicyfruit that little bit more workable and sets firmer :lol:

at least you can see reason , unlike some of the other childish replies that i recieved to my valid comments :thumbsup:

all that was said is that you can do it on your driveway for less than a grand. you're the one whos going a bit mental. :lol:

we can all see what you're saying. obviously this company wont just throw it in, hold it together with a few cable ties and a have a mug of tea and think they've done a cracking job. we all know if you get a company to do something for you it'll cost alot more than doing it yourself. no one was disputing that.

hahahahaha

i'm not going mental

i was just stating some facts that good things don't come cheap and time is money

but what i got from my 1st reply was some childish answers , but that just goes to show the mentality here

what was the op posted for ? a laugh or a debate ?

if it was a laugh it was an attack on the company

if it was a debate i debated certain facts as you do on forums , but all i got back was some childish remarks and pictures

and i still stand by my theories

if it was that easy as i said before many folk would be doing it here

a fair few people are doing it themselves. fair play, i dont think i (or most the people on here) could get my head round anything like that just yet, but i dont really think you can criticise the quality of the ones done on the cheap til you've actually seen them.

but this is the angle of my debate , how long is it taking folk to do it on their own ? long time

time is money

but this is the angle of my debate , how long is it taking folk to do it on their own ? long time

time is money

even if it took me 3 years to do it for 1k, i'd be happy I'm saving myself 7k.. which can probably get you a 9n3 GTi now? if you want a 1.8t Polo.

even if it took me 3 years to do it for 1k, i'd be happy I'm saving myself 7k.. which can probably get you a 9n3 GTi now? if you want a 1.8t Polo.

I agree!

i was just stating some facts that good things don't come cheap and time is money

True! But if you have the knowlage, motivation, tools, live local 2 a VW garage, have an appreciation for your goals in life then anything is possible!

Seriously though that pictures hilarious

I want £100 a day for anything i do,or it aint worth my time. I've been asked to fit bike carb'd hybrid/16v engines into '75-94 Polos with people throwing three ton at me. No chance would i do it for even double that.

Its gonna take me 2-3 days to get everything together,then a day to do fabrication work. Another day to fit,a good three ton in main parts plus half that again for service parts.. Id have to have a system in place to reduce all that,contacts etc,research and development,and that all takes time so id add what i saved for the investment.

I aint a charity. That's a good £800-900 for a conversion people expect to pay £300 for. If you wanna go put a 1.8T in a 6n then stop typing and go crack on with it. Think you can do it for three ton? I probably couldn't get the engine for that - i certainly couldn't re-build one for that. Or double.

Three ton and you're buying a high miler. You gonna put a guarantee on it?

Opw - show us how its done,then you'll be in a position to argue the toss - until then,you aint gonna be taken seriously are you.

Btw, my funny pic has purpose. Exceed your abilities with your intentions to be more competitive than others you question,or claim such excess without substance,and you'd better be prepared to fall flat on your face.

good post ^^^^^^^

very good explination to the funny pic

it's good to have a bit of clarity :smile:

as we speek a r32 6n is being built for less than £1500

hahahahaha

i'm not going mental

i was just stating some facts that good things don't come cheap and time is money

but what i got from my 1st reply was some childish answers , but that just goes to show the mentality here

what was the op posted for ? a laugh or a debate ?

if it was a laugh it was an attack on the company

if it was a debate i debated certain facts as you do on forums , but all i got back was some childish remarks and pictures

and i still stand by my theories

if it was that easy as i said before many folk would be doing it here

i don't think this thread was started as a joke or a dig at the company, looking at it i would say he got a quote from the company for this conversion and was quite surprised with the total he was given, hence posting it up here?

and you are going a bit mental over this lol, people can do this sort of conversion in there spare time for very little, that is not a debate, it's fact. people do this sort of thing all the time

i've done it myself on a smaller scale, i've fitted a 16v in to my mk3 polo for no money, and that included getting the engine conversion. it's easy if you know how. buy a doner car for peanuts, sell off every thing you don't need and make your money back that you spent on the car, the engine has just more than paid for itself. then the fitting is done in my spare time, time that i would of spent sat on my arse doing nothing, and as no one pays me to sit on my arse doing nothing, that time was not money.

read the thread from the start

someone said , fail

someone said that they could do it for less than a gran etc

i made sone very valid points about labour etc

and i got childish retorts

shall i keep pointing things out

even when i took a stab at the hours it would take and broke it down a little , not one person came back with a sensible reply

it really does make you wonder

as i said if it was that easy everyone on here would be doing it

someone send olly a link to this thread please? lol

tbh, as someone said earlier, the cost of an engine conversion (or anything to do with your car really...) depends on your skills and who you know etc, so yeah, it could be done for under a grand with the right skills, tools and being lucky enough to source a cheap, working engine!

scaltura, Where are there 'childish reports' that you speak of? Or are you just trying to dismiss any one that disagree's with you as childish?

You keep going on about how it would take x amount in man hours, but seens as you wouldn't pay yourself that is irreivant because your not paying for labour, all your doing there is highlighting how much you would save yourself if you had the skills to do it.

I just told you in my last post how you could get the parts you need for free or at least cheap depending on how much you make off unwanted parts. If you building it in your free time like so many of us who build cars as a hobby do, then that time is money shit don't mean any thing because its being done in spare time as a hobby.

If knitting was your hobby would you add labour costs on to any scarfs you made for yourself?

And who said the conversion was easy? Its not, but just because you couldn't do it yourself doesn't mean others can't.

scaltura, Where are there 'childish reports' that you speak of? Or are you just trying to dismiss any one that disagree's with you as childish?

You keep going on about how it would take x amount in man hours, but seens as you wouldn't pay yourself that is irreivant because your not paying for labour, all your doing there is highlighting how much you would save yourself if you had the skills to do it.

I just told you in my last post how you could get the parts you need for free or at least cheap depending on how much you make off unwanted parts. If you building it in your free time like so many of us who build cars as a hobby do, then that time is money shit don't mean any thing because its being done in spare time as a hobby.

If knitting was your hobby would you add labour costs on to any scarfs you made for yourself?

And who said the conversion was easy? Its not, but just because you couldn't do it yourself doesn't mean others can't.

and theres the killer reply!!!! totally covered exactly what i was wanting to reply to this!!! (bar the knitting analogy lol)

I've had several conversions done on my polo so far and will be sourcing parts for the 20vt conversion next year and do you know what I've paid for labour costs so far???? zip...the guys my best mate...he loves VWs and does it for the laughs we have up at the garage as a group of mates!!!

my 20vt will probably cost me the price of the engine and thats it....his boss is an engineer so is going to do all the fabrication for me and hes gonna do the mechanics...hes done several 20vts on golfs already so jobs a good un, so less than a grand ??? probably not but less than 2k ....yeh easily =D

also youd be surpised little it costs to mount a 20v turbo !!! i bet i could mount it in a polo for less than £150 !

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.