Skip to content

Uni Mini-project. G40 Stopping distance.

Featured Replies

Hey chaps, I'm in my first year of an Aerospace design degree and for a mini project we've been told to design a given double wishbone suspension system for a car of choice.

I've chosen a G40, to be a bit different from the masses of Atoms, Veryons and alike. However this means that finding data for it is much more difficult.

I've just started at the moment and need to calculate the max forces experienced during; rest, acceleration & deceleration.

At the moment, I need:

- Centre of mass in the x axis.

- Height of the centre of mass, to take moments about.

I don't expect anyone to know these figures, I shall approximate. But, just in case...

Also, I need it's 60-0 mph braking time?

Someone has a rough idea of that?

Many thanks in advance.

Ryan

Edited by Ryan_

  • Replies 19
  • Views 2.4k
  • Created
  • Last Reply

Top Posters In This Topic

You're re-designing something that doesn't exist in the first place... You do know that right?

  • Author

Yeah; sorry worded that rather badly. It doesn't already have to have such a suspension.

People are using vehicles that use leaf springs, in fact it's encouraged.

You're re-designing something that doesn't exist in the first place... You do know that right?

"re-design a given double wishbone suspension system for a car of choice."

Think he means re-design an allready given system to fit to a 86c polo surely?

Sounds like a good project, I think PPP do wishbone conversions for 86c polo's (mk2-mk3), You could enquire with them or have a look at their design?

M

Double wishbone is something else entirely. The Rover 400 (and twin sister Honda Civic) had both upper and lower wishbones on the front in a reasonably small space,a tape measure and pencil could get it on the G40 on paper.

not at UWE are you? i had exactly the same project. in honesty the values you use to start with arent important, its the analysis. providing the numbers are reasonable no one will notice.

one of more enjoyable projects for sure...

  • Author

Aha, yes I'm at UWE!

Just handed in assignments for a trebuchet analysis, and a CAD plumbing valve project, sound familiar also?

What branch of engineering did you do? What did you think to it all?

Edited by Ryan_

First year is pretty similar across all the board for Engineering, i'm a 3rd year Motorsport now.

i like UWE, but wishing i'd aimed higher during a-levels!

out of interest where you wanting to get with a aerospace design degree?

Aviation is a small industry you see! Not what you know its who.

aviation is a massive industry bud. plenty of opportunities.

only problem is a company can lose millions in minutes over any minor issue.

example: loose oil pipe in rolls royce engine = stock price collapse, loss of confidence and court cases.

its not really though, everyone knows each other, people move around from company to company. Trust me I've been init 5 years!

out of interest where you wanting to get with a aerospace design degree?

Aviation is a small industry you see! Not what you know its who.

"The aerospace industry of the United Kingdom is the second- or third-largest aerospace industry in the world, depending upon the method of measurement.[1][2] The industry employs around 113,000 people directly and around 276,000 indirectly and has an annual turnover of around £20 billion"

Your facebook must be full Neil :lol:

First year is pretty similar across all the board for Engineering, i'm a 3rd year Motorsport now.

i like UWE, but wishing i'd aimed higher during a-levels!

I think I might have been doing Motorsport with you last year :paranoid: I came straight into the 2nd year, but didn't come back for the 3rd :lol:

out of interest where you wanting to get with a aerospace design degree?

Aviation is a small industry you see! Not what you know its who.

"The aerospace industry of the United Kingdom is the second- or third-largest aerospace industry in the world, depending upon the method of measurement.[1][2] The industry employs around 113,000 people directly and around 276,000 indirectly and has an annual turnover of around £20 billion"

Your facebook must be full Neil :lol:

:lol: No but you know what i mean. Its one of the hardest jobs to get into, because no one knows anything about it! Trust me, it feels a very small industry from who i've met and where I've worked!

i give up, you cant educate monkeys lol

about the same size as the motorsport industry then

  • Author

Decided to have a play with solidworks last night, and got addicted. Ended up modelling a BBA RA, only did it from pictures on google, though so it's not perfect, and it took me ages as they are so complex I'm chuffed. So it was all guess-timates aside from the width, stud patten & size.

Needs to be rendered and some final tweaks and touches.

jhgghg.jpg

k.gif

fff.gif

Edited by Ryan_

RA looks pretty good, think the spokes should have a bit more angle up towards the face.

Went to UWE for an open day in November. Engineering section looks amazing, wish I could get the grade in maths/physics i would need to do an engineering degree. Going to do Audio technology instead hopefully.

Spokes need to be slightly thicker aswell .

Good for a beginer and drawing from a photo rather than having measuremtnts though !

Good luck with your course .

  • Author

Quick question. And doesn't need to be massively accurate.

But does any one know roughly the arch gap between the inside of the arch and the tyre on a standard G? On the original 13"'s, any tyres.. Any educated approximation will do!

  • 2 weeks later...

Haha! I'm doing the exact same thing at the moment. Although I'm doing mine on a mk2 golf.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.