I am selling my GTi setup from my car

The following will be included

GTi engine - was fully serviced at 66k including cambelt and then serviced again at 80k.. is now sitting at around 83k ish

BMC induction kit

Gti Gearbox - no crunches and drives fine

ECU

Clocks

Immobiliser with key

Gti standard exhaust

OR

A custom made stainless steel exhaust with twin tail pipes

I have had the setup in my 6n for 2 years now and doesnt miss a beat

I think thats it... the only thing missing for a full conversion is the engine bay wiring loom

But this can be sourced quite easily considering how many Gti's are being broken these days

Price

£500 for engine and gearbox

£600 for engine, gearbox ECU, clocks, immobiliser with key and Gti standard exhaust

£700 for engine, gearbox ECU, clocks, immobiliser with key, Gti standard exhaust and BMC induction kit

£900 for engine, gearbox ECU, clocks, immobiliser with mathching keys, BMC induction kit and stainles steel exhaust

i wont sell the stainless steel exhaust or BMC unless the engine sells without it

The engine will be coming out of the car in the next couple of weeks and will need to be collected in the northampton area

I am also able to offer a conversion for MK5 Polos.. PM me for labour prices if you are interested

Edited 13 July, 201115 yr by no1naz

Dibs on Exhaust if all else goes without it

Hi mate, I'm new too club polo so you won't have seen me on here yet. I'm interested in puting this into a mk3, is it all there other than the loom? Thanks, tom

I'm pretty confident i have an engine bay loom which i'm happy to donate to Naz from a GTI. so there are no missing parts on this conversion now. :-)

Hi mate, I'm new too club polo so you won't have seen me on here yet. I'm interested in puting this into a mk3, is it all there other than the loom? Thanks, tom

as far as i can tell, nothing will be missing

the starter motor, alternator etc will be included

Could you call or text me please 07824364489, cheers, tom

Engine and gearbox provisionally sold

once they have gone.... the BMC and stainless steel exhaust will be up for sale

hi would you fit to a mk3 polo ? thanks ash

Did the driveshafts go with box ? Or are you keep them as i need drivers side

Just the exhuast and BMC left now

Pic of the twin exhuast

Heres a video of the exhuast and BMC in action.. you can hear the subtleness of it, has a nice grunt without being to loud

becomes louder when you are high up in the revs.. so it does not have a constant drone like most exhausts

Heres another clip that shows the sound of the exhaust and BMC when driven hard

Looking for £300 for both

Collected from northampton

Price drop

£250 for both

Just the BMC left now, comes with the elbow bend and the cold air feed (which is only a few months old)

£100 collected from northampton