Hi,

I've got a few pieces left over after a refurb - I had to buy a couple of wheels for spares and this is what is left-over.

The rim's lip is already sanded ready for more sanding and polishing, the only problem is that I had an engineering fir, heli-coil a damaged thread (the bolt head snapped when removed) and they have put the coil in a couple of mm out of line. To be built into a wheel, it will need the center drilling a mm or two (for the bolt to move over).

The centers are fine; I've got a silver and a grey one, both slightly corroded. The grey one came from a wheel with a dented lip from striking a curb.

I've also got a set of spare ti original BBS bolts to suit the above, as removed from the spare wheel that donated a replacement rim.

Please drop me a line if interested, or email swalsey@hotmail.com.

Bolts: £2 each.

Centers: £10 each plus postage.

Rim: £5

Thanks,

Antony

be interested in the rim and a centre if they're both straight and ding free... too far away tho me thinks.

what size is the rim, width etc... 4x100?

d.

Hi,

Sorry they are 4 x 100, 15" x 6.5". They are both straight and ding free, and I'm based in Gateshead. Is that any good?

Edited 5 July, 201115 yr by Swalsey

i know a month has gone by but have you still got some spare bolts?

I've replied to your email - I've still got a couple spare.

Antony

Damn, I'd have had the whole lot off you if I'd seen this man.

Cheers dude iv'e replied to yours.

You got anymore bolts left dude?

coldfront - shame! Sod's law...

crags - i want to keep 4-5, i've got another 1 or 2 if you are in need? email swalsey@hotmail.com. I'm in the middle of a house move so i wont be quick in replying or in sending i'm afraid!

Hi,

I've got a few pieces left over after a refurb - I had to buy a couple of wheels for spares and this is what is left-over.

The rim's lip is already sanded ready for more sanding and polishing, the only problem is that I had an engineering fir, heli-coil a damaged thread (the bolt head snapped when removed) and they have put the coil in a couple of mm out of line. To be built into a wheel, it will need the center drilling a mm or two (for the bolt to move over).

The centers are fine; I've got a silver and a grey one, both slightly corroded. The grey one came from a wheel with a dented lip from striking a curb.

I've also got a set of spare ti original BBS bolts to suit the above, as removed from the spare wheel that donated a replacement rim.

Please drop me a line if interested, or email swalsey@hotmail.com.

Bolts: £2 each.

Centers: £10 each plus postage.

Rim: £5

Thanks,

Antony

Do you have any left? Need either a whole wheel or rim?

Cheers

I've only got a couple of bolts left, rims and centers have gone (to the scrap heap IIRC!) - let me know if you need a spare bolt or two, I've not got many left.