Woah woah woah woah! Took me 3 glances to figure.out I was looking at the floor in tht pic! I'll let u off 4 not textin me back yesterday now!

Think I need an update on golf plans man! Will giv u a buzz laters...

As for the car fookin love this beast and it goes like stink even on gt set up and as for handling I felt like burning my g40 after a few high speed twisties in this going to be nothin short of epic with boost! Not sure that the recent flinstones conversion is gonna help rigidity though!

Peace out Azbar

Couldn't be arsed stripping all the shite off the floorpan so I just cut it out instead

Found a fair bit of rust on the sills and rear arches where idiots have repaired it badly beforehand, so gonna give it a proper going over this winter to get it pristine :grin: I LOVE not having to work on it out in the rain!

Your a nice person, for having somewhere warm and dry and well light to work on it

Its like one of my dreams haha!

Its one way of doing it i guess, just cutting the floor out

Your a nice person, for having somewhere warm and dry and well light to work on it

Its like one of my dreams haha!

Its one way of doing it i guess, just cutting the floor out

I've done my time working on it out in the rain! Had years of doing things involving bare metal being interrupted halfway through by the pissing rain. I'M DONE NO MORE.

Ben, how you getting on with your inlet manifold design? :-)

Whack a 4mo floorpan in there, you know you want to

Whack a 4mo floorpan in there, you know you want to

For my 500bhp 1.3?

Found this, which I have been expecting as I knew how it was before it was bodged, so I wasn't entirely surprised or annoyed;

Fuel filler

Both whole sills need replacing, a rear panel and the inner an outer rear arches. Luckily the front of the car is fine though...

U open the sun roof to get a bit more air in there Az?

You really are my hero Arun haha

Wow, just read throught this. So much thought and innovation has gone into this, very well done sir.

I <3 this.

Thanks everyone

Note to those who buy a car thats been welded; Be wary of patches. :idiot:

Sometimes nice people dont even cut out the old panel before welding on the new one :eatShit:

Looks like youv got something to keep you busy then

Look forward to seeing this progress

Looks like youv got something to keep you busy then

Look forward to seeing this progress

Cheers fella, although I'm busy enough as it is with these!

Wish I could spend all my time on the golf Would be done in no time!

Are those cnc'd or is that all hand fabrication?

Are those cnc'd or is that all hand fabrication?

The flanges which bolts to the head are water cut but everything else is hand done :-D

WATER CUT?!?!?!? how much are they

I don't have the machine myself I have a local company cut them :-D

They look nice dude. Whats it for? ITB?

How much do they cut them for? I'll see if i can offer a competative price

I see your selling the G lump, so what is the plan for the engine?

I see your selling the G lump, so what is the plan for the engine?

The engine will be mounted 90 degrees round from what it normally would in this car

It'll be getting the all out treatment, Q plated etc as I can't be arsed with any hassle :-) Been reading up on IVA test requirements.

yes bludfire! can i haz your gearbox mount please?!

see yah stoooopid

Edited 18 January, 201214 yr by grungeisdead

yes bludfire! can i haz your gearbox mount please?!

If you want your engine raised 1.75 inches then yeah!

Right... well I'm not sure what it's going to be, but I won't ask again. I look forward to the surprise!

yes bludfire! can i haz your gearbox mount please?!

If you want your engine raised 1.75 inches then yeah!

DOH!!! Whens good to bob over to you for some front gearbox mount mating?

Also a mates after some welding on his GT, pointed him in your direction!

Cleaning up some rusty bits in the yellows bay on thursday night and gonna drop the lump in on Friday and start fitting boostingsfordhosingdales

slim, it'll be worth the wait trust!

Cleaning up some rusty bits in the yellows bay on thursday night and gonna drop the lump in on Friday and start fitting boostingsfordhosingdales

So were bobbing about in it on sunday then knowing you?

Az its looking phat mate - cant wait to see progress on this

oh em ge

Just had a read threw it all, and some really nice work done there mate keep up the good work looking forward to seeing more!