Skip to content

Scrap value

Featured Replies

I was wondering if anyone knows roughly what the scrap value would be for my 6n polo as I'm trying to decide what to do with it. It has 10 MOT/5months tax. The gearbox is whining like mad when you lift off the gas but goes away when accelerating, and sounds very rough at low speeds. I recon it needs a new gearbox but sadly i can't afford one so i'm getting rid of the car altogether. Body condition is fairly good, some spots of surface rust in a few areas, The bonnet was a replacement courtesy a pedestrian who didn't look crossing the road, so looks faded compared to the rest of the car. The car still drives but the gearbox is getting worse by the day so I've given up.

It's a shame as I've literally just (2000miles or less) put in a Valero Solid mass conversion flywheel and clutch after the DMF failed at a cost of £350, Hence not being able to afford any more work. I have 3 keys, Two flip keys/remote central locking fobs.

Thanks in advance for any advice.

  • Replies 17
  • Views 8.9k
  • Created
  • Last Reply

Top Posters In This Topic

if you have the time, break it for parts :)

You'd be looking about £120ish. I recently got £140 for an Almera, which is a bit bigger.

But why not advertise it on here as spares/repairs? someone might want a project, and you might get more money for it?

Good Luck :)

  • Author

I live in Northern Ireland. Postage can make most of the items not worth while to ship.

  • Author

Is there anything the scrappy wants from the car bar the chassis? Could I strip the radio and plastic dash mounts and eBay them before selling without affecting the valuation

Possibly, I think they're just interested in metal :)

Shame to see another polo end up in scrap.... :(

You could try and sell it to someone in Scotland by popping it over to Stranraer if you can.

got just over £100 for my mk2 in scrap. just weighed it and took it as is they don't care whether its plastic or not.

I recently broke a 6N Polo with a dead gearbox

Made about £300 in parts and the scrappy gave me £60 for the shell, it still had the dash, seats, axles incl. brakes on it, but the guy who picked it up said it was gonna be cubed as soon as it got there so it turns out I could've sold all that seperately too!

  • Author

The ferry to stranrar is a bit expensive believe it or not. Plus the gearbox is so bad now I'm not sure it would survive the drive to the docks.

I have very little mechanical know how, what would be the best way to make money from scrapping this car. Tax is worth £90 for a refund.

you should get 120-150 scrap if you take the wheels off some scrappys will give you a bit more.

  • Author

Cheers for all the advice guys. I've £50s worth of diesel in the tank unfortunately so that'll be the first removal. As soon as it's sorn'ed I'll see about the rest.

Thanks again.

I scrapped my old Diesel and made about £400 in parts and then another £130 for the empty shell :)

To make the most out of it, and if you have the time I would break it, or at least the most valuable parts. Like Engine/Gearbox.. Subframe and rear axle if they are healthy. Body Panels if they are in sell-able condition and the interior parts.

Taking the tyre off the wheels will get you more and any non-metal parts out of the car. Here the scrappy will check for any non-metal and deduct a fraction off for it :(

Mine was completely bare though :)

Take the engine out , cut the cat off ,Take the alloys of if you have any on it , load the shell full of old shit metal wiegh that in , then weigh the cat & alloys in separted Or just take what ever your local scrap lad will give you for it of you can't be arsed doing that sorted

i stripped my bready of every posible thing,all tht was left was doors

and they collected it and gave me 70 quid lol

  • Author
Take the engine out , cut the cat off ,Take the alloys of if you have any on it , load the shell full of old shit metal wiegh that in , then weigh the cat & alloys in separted Or just take what ever your local scrap lad will give you for it of you can't be arsed doing that sorted

I have neither the technical expertise nor the equitment for lifting the engine out.

  • Author
Possibly, I think they're just interested in metal :)

Shame to see another polo end up in scrap.... :(

I just noticed this. The shame is that bar the bonnet the car is very tidy and well cared for. There are one or two small bubbles of rust on one panel but that's it. I just can't afford a new gearbox.

why scrap something that new??

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.