Skip to content

Dan's not low Seat Ibiza

Featured Replies

Well been on the forum for a few years now but never really posted, thought i might as well hit it up as an ibiza is pretty much a 6n2 :)

Had the ibiza for a while, before this i built a VR6 MK3 Golf Estate and had a Nato green MK3 too.

Started off standard;

DSC07038copy.jpg

DSC07070copy.jpg

3 Days went past and coilovers went on;

IMG_0190copy.jpg

Then a chassis notch to get it lower;

DSC07290.jpg

DSC07296.jpg

DSC07298.jpg

Went through various stages of snapping drive shafts (now on #9) and engine mounts;

208251_10150272858169698_635474697_94457

DSC07771.jpg

111.jpg

Raised engine;

DSC07841.jpg

Banded steels 14x8 all round with spacers and started smoothing bumper;

5819397907_fbde1fb682_b.jpg

5819398149_3c42828bb3_b.jpg

IMG_2056.jpg

IMG_2030copy.jpg

Ran into these a few times;

piglets.jpg

Smashed stub axle / wheel bearing to bits;

261473_10150350500599698_635474697_10186

Back on the road;

5888060101_c10389731c_b.jpg

5895229054_cb4813f36a_b.jpg

Wider custom rear arches;

5921807572_b10e947bdf_b.jpg

5921242295_1544a6a43a_b.jpg

5921808278_b7d785a786_b.jpg

5921808644_06a5e588c4_b.jpg

5924073294_5b539682d5_b.jpg

Big fat tour;

5949265453_c76a0aee37_b.jpg

5952159596_4deb294aa7_b.jpg

Then a PG9 for bottoming out in front of 5-0 and got vosa down;

DSC08634copy.jpg

DSC08614copy.jpg

Then got bored of the gay 14x8 steels and got my others banded to 14x9 and 14x10 :D

6030150411_9a848b87da_b.jpg

6046730189_80625b36e2.jpg

6062422535_075edc7945_z.jpg

and how it's currently sat :) work in progress;

6066110220_679dee140d_z.jpg

6066109694_b5972b1ebf_z.jpg

6066110902_ec20dcc9bc_z.jpg

6065564389_0d962ccbe4_z.jpg

6066164960_8d7b25e971_z.jpg

6074780624_6b1b4ff73f_z.jpg

That's it so far (the short story) don't get paid for about 7 weeks... but should be all one colour after that :D

Dan :)

  • Replies 181
  • Views 38.9k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

This is so fucking sick!

The standard suspension pic made me laugh haha, looks disgusting.

I thought the arches looked stupid with the older wheels, bu now with the wider ones they look perfect.

  • Author
This is so fucking sick!

The standard suspension pic made me laugh haha, looks disgusting.

I thought the arches looked stupid with the older wheels, bu now with the wider ones they look perfect.

Thanks dude :) appreciate the feedback. Haha i know man, was sat outside my house like that for a few weeks :-D

I think the back is sitting pretty much perfectly how i want it now, just need to get the front down a little more ;) need to flip the tie rod ends, chassis' sat on steering arms!

stance is sweeeeeet man, car looks the part like! love the steelies :thumbsup:

I've seen this before, your a nutter! :lol:

How come you've snapped so many drive shafts if it's been notched?

Have seen this spread around before, bleddy love it! looks awesome man haha

  • Author
stance is sweeeeeet man, car looks the part like! love the steelies :thumbsup:

Thanks man, i love banded steels :D

  • Author
I've seen this before, your a nutter! :lol:

How come you've snapped so many drive shafts if it's been notched?

Haha where have you seen it man? :) and it was the angle of the drive shaft (until i raised the engine) ;)

Have seen this spread around before, bleddy love it! looks awesome man haha

Thanks bro haha :D where have you seen it before man?

It was on Prox's thread on here for some reason, and over on Edition :p

Bloody hell, that certainly is low :lol:8-) Rear camber is a little too much in my opinion but it still looks superb 8-)

i'd get rid of my schmidts for those steelies lol

1 of the best stanced cars i ve seen! :shock:

Edited by EuroTheFudgeOut

  • Author
It was on Prox's thread on here for some reason, and over on Edition :p

Ahh yeah i've got a build on edition too :) and prox's polo is awesome ;)

Bloody hell, that certainly is low :lol:8-) Rear camber is a little too much in my opinion but it still looks superb 8-)

Really appreciate it, thanks :) and any less camber on the rear and the 10's would rub :lol: they didn't with the 8's i just love dickhead camber :D

  • Author
i'd get rid of my schmidts for those steelies lol

1 of the best stanced cars i ve seen! :shock:

Should get some as winters :D

and wow thanks man, i really need the front down some more :) i got a comment today at my new job of "Bin on wheels" made me laugh!

Yeah i've seen it in prox's thread like Rich said and also linked on his facebook haha ;)

Yeah, think prox is after something dude ;)

Looks nice mate, what happened with police/vosa, story to be dig up here i want to hear it!

  • Author
Yeah i've seen it in prox's thread like Rich said and also linked on his facebook haha ;)

Haha just checked it out :) my fucked subframe's on there too :lol:

268129_10150349888709698_635474697_10181

Yeah, think prox is after something dude ;)

Hahaha, i do have massive love for his 6n2 <3 ;)

Looks nice mate, what happened with police/vosa, story to be dig up here i want to hear it!

Haha well, i bottomed out in front of the 5-0 and pretty much covered their car in sparks.. so (obviously :lol:) they pulled me, 2 cars where there looking over and under it and to be honest they where the nicest coppers i've ever met, usually they're so judgemental! They was asking me about it and just ripping chavs with their tints and shit cars! My rear strut had smashed through the top mount so he wasn't sure on the legality of that so got vosa down, at this point i had about 8 coppers looking over my car and they saw my rear tyres had been rubbing and i explained about the new arches that we welded in and just said "oh great, looks like they're done to a high standard" so just passed on and said he can't really let me go with the rear strut (which is pretty understandable, just doing his job) and gave me a PG9, i still need to put it through an MOT :( non round here are very 'friendly' so it's going to be a challenge getting that sorted :) sorry if that was long and boring haha..!

Hahaha, i do have massive

I got that far and got very scared.. Prox would love this though.

Oh shit, one of my rear struts has blown through...had it like that for months now :lol:

Very nice, love how low it is!

  • Author
Hahaha, i do have massive

I got that far and got very scared.. Prox would love this though.

Hahah, you don't wanna know man ;)

Oh shit, one of my rear struts has blown through...had it like that for months now :lol:

I would get it sorted mate :) i sorted mine with 2 washers :lol: prevents an MOT if you get pulled (they didn't seize my car with it being too low) but could cost you a lot of money :(

Very nice, love how low it is!

Thanks buddy :D

i fucking love this car man love it think it looks far better with out the seat badge

absolutely insane :shock: awesome car man

  • Author
i fucking love this car man love it think it looks far better with out the seat badge

Thanks mate :) but what do you mean with out the seat badge? Still has one? :lol:

absolutely insane :shock: awesome car man

Cheers man ;)

Your car is shit danny.

It was on Prox's thread on here for some reason, and over on Edition :p

Yeah i've seen it in prox's thread like Rich said and also linked on his facebook haha ;)

:lol:

looks mad in person when you can see how low it actually is his bonnet comes up to my shins haha

And it was me who posted on Proxs thread :) he put a sub frame shot and had to show him yours, then he was on about getting a mk3 state so showed him your old one :p free whoring for you :)

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.