right high guys, big appologies for posting this up a few months ago and not replying to messages, i know there isnt a real excuse for not replying but iv been seriously busy and haven't had time to strip it. anyway I'm going to put this up as a whole car before i strip it as i would rather not have to break. most parts brand new as i was only driving it for a month before i got carried away and crashed :(.

1.3 cl car, a tad bent obviously as i had a collision with a ditch.

engine

1.3 gt engine

cbr 600 carbs

aluminium cnc machined intake manifold to fit carbs

4 branch manifold stainless

lightened 1 litre flywheel

1.4 16v clutch

facet fuel pump

filter king filter/preasure reg

roughly 80-90k but carnt be proved, ran really well but haven't started since crash as its been wedged into gear as the engine has moved, will take the rod off and try and start, keep you updated.

chassis

koni spring and shock kit, possably one bent shock

new powerflex poly bushes, possably some damaged

new goodridge braided hoses all round, possably one damaged

new black diamond drilled and grooved discs

new copper brake lines all round

new rear wheel bearings

fully rebuilt vw2 calipers

new rear slave cylinders

new handbrake cables

new carb petrol tank

modified h frame with plate welded across to stiffen. works really well, handled like it was on rails even on standard rims. painted in hamerite white

unknown roll cage, steel 6 point abit tatty but would tidy up without much effort. looks and should be straight still as i only floped onto roof

interior

corrado seats, collapsed bolster on drivers seat. need a good clean

retro fit rev counter

motor bike choke lever

securon 3 point harnesses

other things included

would probably be in your interest to take the whole car as the roll cage mounts are quite tidy and built by my friend that does prototype work for land rover, theses could possably be cut out and re used

taty 13 x 7 wellers

top, front aluminium strut brace

full gt ecu intake manifold throttle body and wiring loom set up

also full single point ecu and wiring loom

would probably be in your interest to take the whole car if your after the cage as the roll cage mounts are quite tidy and built by my friend that does prototype work for land rover, these could possably be cut out and re used

prob have a few more bits lying around i carnt think of

i will put a price of 900 for the lot which seems alot but it cost me alot more to build. will consider offers

let me know if interested within the week as I'm gonna start stripping next friday

located in coventry, viewing welcome, would need a trailer or flatbed as well as a plan to load it on as it doesnt roll. tel 07415566713 after 4 pm 7 days a week

http://s41.photobucket.com/albums/e254/fre...789/mk2%20polo/

thanks fred

How much for the boot lid?

i would take flywheel, copper brake lines and disks and maybe the fuel tank?

if you break it mate il have the cbr 600 bike carbs and dizzy set up, with loom, cheer liam

thanx for the interest guys, will get back to you all at the weekend if not sold as complete car

I'm up for the strut brace if you was willing to post

If it doesn't sell whole I am interested in the 4 branch for sure, price dependant.

How much for the VW2'S and discs?

carbs how much?

konis? interested.

pm'd

Any idea if this is being broken yet? How shafted is the bonnet?

right yes i am breaking this now, but not yet in pieces. the only panel worth having is the tailgate pal. i need to work out some pricing to.

how much for gt cam and facet fuel pump

Mate the bonnet might be more use to me than you think, as long as I can stamp on it to get it straight enough to close I'd be interested in it as long as the price reflects the condition of it (in other words as long as its piss cheap )

Any news mate? Really need a bonnet to start working on and could collect asap

How much for the cage?

Mate your wasting your time, I've given up waiting for a reply

corrado seats and retro fit rev counter how much?

I'm interested in the rado fronts, PM me with a price.

interested in the lightened flywheel,has it been balanced proply and machined professionaly? pm me a price posted due

Hello mate. Do you have the front and rear door cards? Not interested in condition except I dont want them broken!

pmd you about some bits a while ago dude. If youre this bad replying to people i dread to think what youre gonna be like when it comes to posting the bits out lol

Joined: April 2008

Profile Views: 59*

Last Seen: 8th October 2011 - 11:53am

Local Time: Sunday 13th November 2011 - 11:19pm

65 posts (0.05 per day)

That probly explains why I've had no reply either

pmd you about some bits a while ago dude. If youre this bad replying to people i dread to think what youre gonna be like when it comes to posting the bits out lol

I'm still need a boot lid but its not looking like anythings gonna come of this one unfortunately, but its never a good sign when an advert starts with "right high guys, big appologies for posting this up a few months ago and not replying to messages"