Unfortunatly havin to sell up so i can go to bali for a month

Now willin to break or i will nock 50 off as iv sold the frnt calipers

The car as it stands.....

Afh engine with cbr carbs on the itb manifold, iv left the injectors in to fill the holes incase the new owner decides to go throttle bodies if not u can block the holes with bolts or sumthing

The cambelt was done by last owner (matt way) befor he dropped the emgine in around a year ago

G40 brakes with near new vented discs and brand new brembo pads and braided lines al round

Rear beam was strengthend and derusted and painted red and black with nylon bushs

2.5 inch stainless steel exhaust

Carrado front seats in good condition, coupe s door cards including the rears, mono tuner steering wheel with quick release, still has the original tape player with ipod cassete adaptor.

Its sprayed oxide red (pics of mr doing it r in this thread) but unfortunatly the windscreen got cracked down the middle as we were puttin it back in (i will get a new one ordered for fitting for the new buyin on day of collection and knock off the price of what it will cost)

Has a chrome forge motorsport header tank.

I also sprayed up al the outside trims in matt black and riveted them back on with tiger seal under neith to keep the water out, also ther was rust on the driverside sill witch i have chopped out and replace, whole car is solid and rust free!!

Brand new powerflex poly bushed tcas and nylone arb blocks made by me ( see thread)

It will be on a set of 14x6 ronal multispoke alloys but the tyres arnt the best, will aslo come with the lenso rims witch i started to refurb, the lips have been polishd jus the centres need to be sprayd in what ever colour you'd lik, they will possibly come with a set if decent low profile tyres.

Umm spares are.....

All from a coupe s

Alternater

Rad and fan and crowling

Front struts still with discs and calipers on

Heater matrix

Back driversside window

Drive shaft

Window wiper mech

Tow tow bar that fits the saloon but i took it off

Thers prob loads iv forgot but u get the idea

Mot till end of november but no tax as iv neva actualy insured and drove it properly

Iv done all the work that neede doin to go thro next mot...welding, ball joint boots, brakes etc

I'm after 1200 ono i think is fair as I'm already going to be losin money on it buti realy want to go away so this had to go

Got any question jus give me a pm

If iv forgot anything i will add it in the next couple days

Cheers

This post has been edited by loon27: Today - 6:40pm

This post has been edited by loon27: Today - 12:55am

Edited 11 October, 201114 yr by loon27

Also i have a coupe s exhaust manifold and a therostatic sandwitch plate with mk1 golf oil cooler

how much for zaust, raddo seats, steering wheel and boss? any pics??

cheers.

pics of a few bits

how much you looking for the forge header tank posted mate

EVERYTHINGS GOT TO GO

Open to offers on everthing

Also Got some german shocks (phil j style but not yellow)

With 40mm lowering weitec springs

Also the shell is free to anyone willing to collect or get collected this weekend

Would be ideal for thd start of a project its rot and dent free id rather sum1 had it thn see it scraped :(

What condition's the driver's door in please?

Good straight rust free, if u want it let me no asap as I'm scrapin the shell at the weekend

how much for the shocks and lowering springs? posted

rear number plate lights? do they work? How much posted, can you post them in tomorrows post? needed urgently for mot, cheers

how much for the lowering springs

man id love to have the shell so much but its too far away, 220 miles each way :(

Iv started to chop the back off to make it a polo pick up :)

Iv started to chop the back off to make it a polo pick up :)

booooo! it looked like a solid shell! always wanted a loon

Yea mate it was solid, i offered it out but no1 wanted it so itll be scraped this week

Hi mate, I'm needing the following bits if you have them...

Bumper clips (just 1 needed)

Front indicator lenses

Steering column cowling

If you have any just drop me a PM, would be a massive help.

hi mate, are you still selling the engine, I'm after the lot for a conversion.

Sorry mate al the engine stuff is sold

how much for the steering wheel posted mate?

Its gone mate

Clocks?

wacha got left then?

sucha shame u broke this :(

this is scrapped now

Got suspension, exhaust, bumpers, rear beam and wheels

Got suspension, exhaust, bumpers, rear beam and wheels

LOTS! of wheels

how much for the wheels posted ? thanks