Skip to content

Kerm(it) Mk2f Coupe (Rebuilding + porting engine)

Featured Replies

I have always wanted a mk3 polo coupe ever since my grandad had one when i was small.

after my 1st car (polo 6n2) which well now is in bits and the roof line is 3ft shorter than usual, I bought myself another polo 6n2 exactly the same as the first lol

I never quite felt atached to the 2nd one like i did the first so te hunt was on for a mk3.


after about a year of rot boxes, sheds and total mot failures, I managed to find (off this website) what would be my first mk3 polo coupe.


Went to look at it, put down a deposit then next day drove it back to mine.


Drove back faultlessly, nice, smooth and nippy for what i would of expected lol

Just like to say a big thanks to willsalter1000 for the car.



So after getting it home first thing was to check to see if i could fit a radio
yes the wiring harness is there but i dont have that sized speakers

next was to wipe down the interior and fit my gear knob that I've had laying around for ages.(shall see it in the pics)



Then was a wash and much deserved polish and these are the results

PEEKING!!!
DSC01597.jpg

The VW collection

DSC01598.jpg

so as the sun came out i sort of rushed the polishing to get it done for some pics.

DSC01600.jpg

DSC01601.jpg

me lol

DSC01603.jpg

DSC01606.jpg

and the full car...

DSC01605.jpg

now since I've had it i have done a few thing to it.

I have fitted my wooden gear knob with the wolfsburg crest on and some period vw rubber mats as you can see...

DSC01607.jpg

now the speakers in the center console are there obv cos i dont have a radio.. or didnt have lol

just fitted one in the other day and it dont sound all that bad lol the dash acts like a bass box and the little 10cm speakers do their job well lol

i have pics but shall have to upload them later.




under the skin

decided to give the engine bay a good clean and see if there were any nasty surprises lurking about and i am pleased to inform you that there isnt lol

DSC01610.jpg

DSC01609.jpg

DSC01608.jpg

still need some work cus its no were near my standard of clean yet lol

but give it time biggrin.gif

things to look forward to

I have just bought some goodies on tint-a-web

new lows biggrin.gif
yellow tinted headlight bulbs (retro look)
de-badged grill (who can resist at £4..59) hehe

thats it for now but shall get better pics of interior up in abit and then its just waiting for new parts biggrin.gif

Edited by v-dub-ee-dan

  • Replies 164
  • Views 20.6k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Ill pick your brains on them mods once I've got mine back together, K. I know the head rebuild isnt easy, just interested in what actuqlly goes into it :) Good luck anyway

  • v-dub-ee-dan
    v-dub-ee-dan

    Been quite a while since I last updated this thread. I'm in the process of uploading pics and writing quite a bit of things that I've done to her and things that will be coming. Some bad time and some

  • Author

Small update

Found my pictures of the speakers i have put in an a close up of the gear knob.

ALSO... I got myself some yellow tinte headlight bulbs!!! look awesome but the do give off a weird smell lol not burning or anything like that sort of alcoholic lmao

pics bellow

since its sunny up here in Durham i decided to give it a good clean again and black the bumpers back up.

Heres are the pics

enjoy

Stereo

DSC00069.jpg

Dash speakers

DSC00070.jpg

WOODEN gear knob :D

DSC00072.jpg

Yellow headlights

DSC00075.jpg

what they look like (darkened the pics cus shit phone quality) :)

DSC00076.jpg

DSC00077.jpg

glowing

DSC00078.jpg

ALL CLEAN

DSC00068enhan.jpg

DSC00080.jpg

spot the sticker

DSC00082.jpg

DSC00084.jpg

now when the de-badged gril gets here i might buy some seperate headlights to actualy tint so a quick PS to look see

DSC0007g9.jpg

I am quite liking the yellow with the green :D

leave comments please lol

more soon peeps 8-)

Edited by v-dub-ee-dan

I am liking the green, it's a lovely shade!

get you some fancy suspension sir.

  • Author

i know :( the arch gap is slightly embarrassing to say the least lol

looks like a fantastic example :D got potential :) what are your plans for it?

  • Author

thanks bud :) got just some simple plans for it realy.

tidy it up abit more lower it not too much and some new rims going to try keep it OEM looking

saying that my new grill arrived yestaday!!! they sai it would take till the 17th to come so i am realy pleased :D

fk automotive (new) cost me ...... £4.45 with delivery!! heheheh

PICS!!

old one off

DSC00085.jpg

new grill on..

DSC00086.jpg

DSC00087.jpg

DSC00088.jpg

:D

more updates soon i hope :)

Edited by v-dub-ee-dan

New and shiny :) bloody hell, bargain! :D

  • Author

realy smartens up the front end like and i know :D couldnt belive the price so i just had to lol

ANYWAY ITS UPDATE TIME!!!!!!!!!

Soooo last night i got bored and nothing is very well thought through when your bored lol

I decided to remove the bump strips..

managed to get the drivers side one off no problem how ever i SLIGHTLY underestimated the stickyness of the sticky stuff underneath lol

I tried tar remover, petrol, t-cut and many other methods to remove it but only the petrol managed to shift some of the little bits of glue.

so unless you want to spend a week on each side i suggest you go out and buy your self a toffee/caramel/caramac wheel...

it only cost me £6 and its easier than people make it out to be you just have to be careful using it lol but..

THEY ARE BRILLIANT!!!

so this is my failed attempt last night lol :doubt:

CAM00005-1-1.jpg

not the best pic but i was annoyed lol

so today i gave it another go after buying a toffee wheel or as the detailing shop called it a DO NUT?? :lol:

the first part of the door done :D

CAM00006.jpg

as you can see the sticky crap on the rear is still there

CAM00007.jpg

Half gone :D

CAM00008.jpg

Finally got one side done, well i say finally it took 25 min lol and that included buffing the residue away lol

you can make you the yellow dust that is created by the wheel so please dont do it on your mums nice lawn lol

CAM00009.jpg

Sooo time for the other side and these are the results :D

CAM00010.jpg

CAM00011.jpg

so if you want to know where i got the wheel from it was

Wrightway garage in East Boldon in the north east lol

great guy and great amount of kit available!!!

so any questions ask

or leave opinions :D thanks

Edited by v-dub-ee-dan

beautiful example! paint work looks lovely and I love the wooden gear knob!

  • Author

thanks :D paintwork still isnt up to scratch yet but i am a perfectionist lol

and cheers i was unsure on the gear knob but wen its an original part in a box i had to show it off lol

glad you like it anyway :D

hahah best way to be! . . . yeahh I really like it mate goes so well with the car :)

  • Author

well I'm glad someone thinks so too 8-) the girlfriend hates it and the car for that fact :sad: .......

but tough :finger::lol: lol

I'm really gonna have to buy one of these wheels, no one has heard of them over here though!

Going to a meet tonight to see if I can inquire about one.

Ah you see, your girlfriend must have her own car.. This is is where you have went wrong. My girlfriend can't drive, so she has to love anything that I drive. And she has really grown to like it now, she complains whenever I mention buying a Mk2 Golf or something haha

  • Author

no she cant drive lol she loved my 6n2 tho but she will have to get used to it or there is always the bus :D

someone must know what it is over there? its a tool that people use when stripping emergency vehicles reflective off i.e. ambulances and so on.

so easy to use i used a normal drill with two handles on 1000rpm, it says 4000 max but 1000 did it for me plus you have extra controll. then once the glue was off it was just a case of buffing what was left of the wheel that had stuck to the paint off, n well you have seen the results lol

good luck in finding one mate

  • Author

just for anyone that doesnt know what the hell this wheel looks like this is it

the toffee wheel

CAM00012.jpg

it is basically a softish rubber disc, it did have a flat edge but as you can see this is what it will look like when used about a 34/45 degree angle

CAM00014.jpg

can get them on bay of E or any other body specialist places

i just searched car body detailing toffee wheel and it came up after some searching.

Edited by v-dub-ee-dan

toffe/fudge wheels are the best!

The smell too, amazing! haha!

Like this, class colour.

  • Author

ill deffo agree to that like lol smelled odd but in a nice way lol

cheers bud :D

I've been trying to find a way to remove the sticky shiz! now i know :D someone recomended boiling water? dunno if that works though! ahaa. looking good :p

  • Author

no no no dont!!! espesh if its red it will just fade like fook!

even if it isnt dont use boiling water bud

just get your hands on one of these wheels and just be careful while doing it ;)

for 6 pounds its worth it. even practice on something lol luckily i have a smashed up 6n2 behind the house to do it on lol

no no no dont!!! espesh if its red it will just fade like fook!

even if it isnt dont use boiling water bud

just get your hands on one of these wheels and just be careful while doing it ;)

for 6 pounds its worth it. even practice on something lol luckily i have a smashed up 6n2 behind the house to do it on lol

I used hot water on all my cars and it was fine. Wouldn't bang boiling water on though.

Good work on the car and a great colour :-) Keep it simple with this one. As its condition and quality speaks for itself.

:thumbsup:

  • Author

i agree hot water to a point but id test it on some hidden paint work first just to see what happens lol

and cheers bud :D

just keep watching folks :)

  • Author

soo not really an update but it involves another vw lol

had a bit of a road trip following my uncle in his LT28 short wheelbase reimo camper to the MOT station.

our little convoy turned some heads in the towns like :D glad to see some people recognise good cars when they see them :p

and finaly...

CAM00017.jpg

CAM00018.jpg

Edited by v-dub-ee-dan

no no no dont!!! espesh if its red it will just fade like fook!

even if it isnt dont use boiling water bud

just get your hands on one of these wheels and just be careful while doing it ;)

for 6 pounds its worth it. even practice on something lol luckily i have a smashed up 6n2 behind the house to do it on lol

Cheers for the heads up :) mines calypso green, dunno if it would damage the metalic...? but il avoid boiling water! haha, werent too kean on the idea to be honest, was just a suggestion was someone. but il try hot water, before spending money as I'm a cheapskate! haha. been trying to get the majority of the sticky pad of while its dry just cos it looks ugly as sin, and it kills your thumbs and fingers!!

  • Author

lol you end up with sort of hand doing that >-<

33b056e.jpg

:lol:

just buy the wheel bud it saves the hassle lol

Yeah thats what my hand looks like now! ;) haha. il try hot water at the weekend and see how that works, if all fails il get the wheel :) got to get some nasty stickers off it too, 20 years of glue isnt easy!!

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use Privacy Policy Guidelines

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.